Ning Deng

Ning Deng

Auto-generated profile, based on publicly available information

Ning Deng

Institute of Microelectronics, Tsinghua University, Beijing, China

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2022 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
NDNing Deng
Ning Deng
LZLiangjia Zong
Liangjia Zong
HJHengyun Jiang
Hengyun Jiang
YDYuhua Duan
Yuhua Duan
KZKai Zhang
Kai Zhang
The ever increasing capacity demand on optical networks and the slowdown of improving spectral efficiency lead to the solution of utilizing more wavelength band in existing optical fibers. More and more operators will extend from C band to C+L bands, or plan to deploy C+L systems, and in future they may utilize more of other bands. This paper firstly discusses different optical layer architectures for multi-band system. Using optical components that can natively support multi-band is attractive to us, because in this way the multi-band system can be planned and operated similarly with the single-band system, which is customer friendly and potentially more economical. We address mainly three technical challenges in this paper. The first one is the wide-band fiber optical amplifier (OA). After a short review of recent research progress of multi-band OA, we propose a hybrid erbium-doped fiber (EDF) and bismuth-doped fiber (BDF) based OA approach, and demonstrated single-stage amplification over 100 nm in extended C+L bands with a gain of >10dB. A multi-stage OA is under study and has potential to satisfy the optical specification (gain, maximum output power, noise figure, etc.) required by commercial applications. The second challenge is the optical cross connect based on wavelength selective switch (WSS). It is not trivial to realize a C+L-band WSS while prevent the key optical parameters (filtering bandwidth, loss, channel isolation, etc.) be degraded. We analyze different technical schemes, and propose an optical design based on an LCoS with a large panel size and a high-dispersion diffraction grating. The optical design and simulation on a 235 WSS reveals this approach can support 100-nm extended C+L spectrum and is promising for commercialization. The third challenge is the SRS induced WDM channel power inequality, which is more severe for multi-band system. We propose a solution by using OAs with our novel optical spectrum processor (OSP). Simulation and experiment showed that the power of the WDM channels can be equalized on a per span basis, which can prevent accumulation of SRS induced WDM channel power transfer and can meanwhile keep the OSNR of WDM channels well equalized.

20 June 2016 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
Jing XuJing Xu
Jing Xu
ALAobo Lin
Aobo Lin
XYXiangyu Yu
Xiangyu Yu
YSYuhang Song
Yuhang Song
MKMeiwei Kong
Meiwei Kong
NDNing Deng
Ning Deng
In this letter, we propose and experimentally demonstrate an underwater wireless optical communication system based on a simple and cost-effective TO56 transversal multi-mode green-light laser diode (LD) and a low-cost 150-MHz positive-intrinsic-negative detector. We use quadrature amplitude modulation (QAM)-orthogonal frequency-division multiplexing modulation, with fine frequency granularity and high spectral efficiency, to tackle the challenging issue imposed by the ragged and uneven frequency response of the green LD within a limited bandwidth. We have demonstrated that a bit rate of 1.118 Gb/s (net bit rate: 0.927 Gb/s) can be achieved at a bit-error-rate of 2.98 × 10 -3 , with the assistance of bit loading (using both 16-QAM and 256-QAM signals). A spectral efficiency as high as 6.18 bit/s/Hz is also obtained in the proposed underwater wireless optical communication system.

15 February 2017 in RSC Advances
Verified
Journal Article
Open access
PDF file
CYCong Ye
Cong Ye
JWJiaji Wu
Jiaji Wu
CPChih-Hung Pan
Chih-Hung Pan
TTTsai Tsung-Ming
Tsai Tsung-Ming
TCTing-Chang Chang
Ting-Chang Chang
HQHe Qian
He Qian
A low temperature supercritical fluid nitridation (SCF-nitridation) technique was investigated to dope nitrogen into a indium-tin-oxide (ITO) electrode to boost the performance of hafnium oxide resistive random access memory (RRAM). After the SCF-nitridation treatment, the memory window for the N:ITO electrode device was increased from 40 to 100. Moreover, the operation voltages (VSET and VRESET) and currents (ION and IOFF) were remarkably decreased, in which the IOFF was decreased to 65 nA. The possible reason for the performance improvement of resistive switching memory with the ITO transparent electrode induced by SCF-nitridation treatment was carefully explored.

10 March 2014 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
YZYe Zhang
Ye Zhang
HWHuaqiang Wu
Huaqiang Wu
MWMinghao Wu
Minghao Wu
NDNing Deng
Ning Deng
ZYZhiping Yu
Zhiping Yu
HQHe Qian
He Qian
In this Letter, the origins of current fluctuations of Al/AlOx/WOy/W bilayer resistive random access memory (RRAM) devices are investigated through detailed noise analysis. Random telegraph noise (RTN) measurements were performed on RRAMs with three different resistance states. An obvious RTN signal with 40.7% amplitude difference was found at high resistance state, and the trapping/de-trapping process leading to the RTN signal was studied in detail by extracting the trap energy from energy diagram. For median and low resistance states, the resistance fluctuations were 34.0% and 0.3%, respectively. To further study the RTN characteristics, the normalized power spectral density (PSD) was analyzed. It is found that, for one dominant-trap caused RTN phenomena, the normalized noise PSD behaves as 1/f 2 on the high resistance state; while for median and low resistance states, the noise follows 1/f rule, suggesting that the current fluctuations are associated with the envelop of multiple RTNs caused by traps located near/in the conductive filament. Based on the noise analyses in time and frequency domains, a conduction mechanism is proposed to describe the trap effects on the current fluctuations of different resistance states.

1 May 2024 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
NGNingning Guo
Ningning Guo
GSGangxiang Shen
Gangxiang Shen
NDNing Deng
Ning Deng
BMBiswanath Mukherjee
Biswanath Mukherjee
Channel power optimization for better transmission performance is essential but complex in C+L-band systems and networks due to power transfer caused by the inter-channel stimulated Raman scattering (ISRS) effect. Channel power optimization to maximize channel generalized signal-to-noise ratio (GSNR) flatness has become a common practice in industry due to its balance in channel capacity and network operational simplicity. Nonetheless, this raises an important question: can channel power optimization with GSNR flatness achieve maximum capacity for C+L-band systems and networks? For this, we focus on two optimization objectives: solely maximizing total capacity and jointly maximizing average channel GSNR and channel GSNR flatness; and we introduce a GSNR estimation model to evaluate channel signal quality and an enhanced particle swarm optimization (PSO) algorithm for channel power optimization. Moreover, to maximize total network capacity, we extend a GSNR-aware traffic grooming algorithm, in which three wavelength assignment sequences are considered. Simulation studies show that, in C+L-band systems, channel power optimization with GSNR flatness can maximize total Shannon capacity in all systems and achievable capacity in short-distance systems, which however fails to maximize achievable capacity in long-distance systems. In the context of optical networks, wavelength assignment sequences do not impact total network capacity under channel power optimization with GSNR flatness, whereas channel power optimization with maximum GSNR can maximize total network capacity under wavelength assignment sequences preferring to low-margin and high-frequency channels. Furthermore, by comparing network capacity difference under the two optimization objectives, it is observed that channel power optimization, focusing on maximizing channel average GSNR and channel GSNR flatness, can achieve a network capacity close to solely maximizing channel GSNRs in an optical network with short average link length. However, this difference grows as the average link length in the network increases. This suggests that channel power optimization with GSNR flatness is advisable for metro-area or regional networks considering its simpler network configuration. However, for long-haul networks, channel power optimization should target to maximize channel GSNRs to exploit its potential network capacity.

1 October 2015
Verified
Conference Paper
Closed access
MWMingqing Wang
Mingqing Wang
NDNing Deng
Ning Deng
HWHuaqiang Wu
Huaqiang Wu
QHQian He
Qian He