High-performance analog and mixed-signal (AMS) circuits are mainly full-custom designed, which is time-consuming and labor-intensive. A significant portion of the effort is experience-driven, which makes the automation of AMS circuit design a formidable challenge. Large language models (LLMs) have emerged as powerful tools for Electronic Design Automation (EDA) applications, fostering advancements in the automatic design process for large-scale AMS circuits. However, the absence of high-quality datasets has led to issues such as model hallucination, which undermines the robustness of automatically generated circuit designs. To address this issue, this paper introduces AMSnet-KG, a dataset encompassing various AMS circuit schematics and netlists. We construct a knowledge graph with annotations on detailed functional and performance characteristics. Facilitated by AMSnet-KG, we propose an automated AMS circuit generation framework that utilizes the comprehensive knowledge embedded in LLMs. The flow first formulate a design strategy (e.g., circuit architecture using a number of circuit components) based on required specifications. Next, matched subcircuits are retrieved and assembled into a complete topology, and transistor sizing is obtained through Bayesian optimization. Simulation results of the netlist are automatically fed back to the LLM for further topology refinement, ensuring the circuit design specifications are met. We perform case studies of operational amplifier and comparator design to verify the automatic design flow from specifications to netlists with minimal human effort. The dataset used in this paper is available at https://ams-net.github.io/.
A compact E-band power amplifier (PA) with gain-boosting and efficiency enhancement technique is proposed and implemented in a 65-nm CMOS process. The proposed gain-boosting unit consists of cross-coupled transistors to introduce negative impedance and improve the quality factor of matching networks. Thus, the power gain and power-added efficiency (PAE) can be substantially improved at the power back-off (PBO) region. Neutralization capacitors are also adopted to improve power gain, reverse isolation, and stability as well. The proposed PA achieves a measured PAE of 22.37%, a Psat of 14.29 dBm, and an OP1 dB of 12.03 dBm with a maximum power gain of 31 dB when the gain-boosting unit turns on. By adjusting the control voltages of the gain-boosting unit, the measured peak gain increases from 26 to 31 dB, and a maximum of 1.7-dBm output power and 5.2% PAE improvement at the input power corresponding to IP1 dB under the gain-boosting unit turned off are achieved. Furthermore, modulation measurement shows that the proposed E-band PA supports 16-Gb/s 16-QAM and 9.6-Gb/s 64-QAM modulated signals with error vector magnitudes (EVMs) of -17.7 dB/-23.1 dB and average output powers of 8.75 dBm/10.41 dBm, respectively. The core area and dc power consumption of the PA are only 0.025 mm² and 120 mW.
In this Letter, the origins of current fluctuations of Al/AlOx/WOy/W bilayer resistive random access memory (RRAM) devices are investigated through detailed noise analysis. Random telegraph noise (RTN) measurements were performed on RRAMs with three different resistance states. An obvious RTN signal with 40.7% amplitude difference was found at high resistance state, and the trapping/de-trapping process leading to the RTN signal was studied in detail by extracting the trap energy from energy diagram. For median and low resistance states, the resistance fluctuations were 34.0% and 0.3%, respectively. To further study the RTN characteristics, the normalized power spectral density (PSD) was analyzed. It is found that, for one dominant-trap caused RTN phenomena, the normalized noise PSD behaves as 1/f 2 on the high resistance state; while for median and low resistance states, the noise follows 1/f rule, suggesting that the current fluctuations are associated with the envelop of multiple RTNs caused by traps located near/in the conductive filament. Based on the noise analyses in time and frequency domains, a conduction mechanism is proposed to describe the trap effects on the current fluctuations of different resistance states.