Shunqun Li

Shunqun Li

Auto-generated profile, based on publicly available information

Shunqun Li

School of Civil Engineering Tianjin Chengjian University Tianjin 300384 China tcu.edu.cn

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2023 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
XCXuelei Cheng
Xuelei Cheng
QLQiqi Li
Qiqi Li
RHRan Hai
Ran Hai
SLShunqun Li
Shunqun Li
CHCun Hui
Cun Hui
ZZZhizeng Zhang
Zhizeng Zhang
Sixteen groups of comprehensive tests were undertaken to examine the modifications in the mechanical characteristics of weak expansive soil resulting from the inclusion of a composite material comprising cement and jute fibers. The aim of the tests was to analyze the unconfined compressive strength and shear strength. The results reveal that (1) as the modified material content increased, the stress–strain curve of the modified soil progressively became steeper, with a more pronounced peak value. Under the same strain condition, the stress variation increased accordingly. After the stress reached its maximum, a sudden phenomenon of brittle axial compression failure occurred. (2) With the increase in cement content, the unconfined compressive strength and shear strength of the modified expansive soil gradually increased, reaching the highest shear strength when the cement content was 8%. With the increase in jute fiber content, the unconfined compressive strength and shear strength of modified expansive soil increased first and then decreased, reaching the highest value when the content was 0.5%. (3) The cohesion of modified expansive soil increased with the increase in cement content. When the cement content was 8%, the cohesion of the soil sample was as high as 298.29 kPa. The cohesion of modified expansive soil increased first and then decreased with the increase in fiber content. When the jute fiber content was 0.5%, the cohesion reached the maximum value. (4) The internal friction angle of the modified expansive soil increased with the increase in cement content. When the cement content was 8%, the internal friction angle of the soil sample increased by 2.64°. The cohesion of modified expansive soil increased first and then decreased with the increase in fiber content. When the jute fiber content was 0.5%, the internal friction angle reached the maximum value.

31 May 2011 in Journal of Convergence Information Technology
Verified
Journal Article
Closed access
LGLingxia Gao
Lingxia Gao
MLMaotian Luan
Maotian Luan
SLShunqun Li
Shunqun Li

1 January 2017
Verified
Conference Paper
Open access
PDF file
LGLingxia Gao
Lingxia Gao
XYXiangjun Yang
Xiangjun Yang
SLShunqun Li
Shunqun Li
The collapsibility has become a key material property to study strength and deformation behavior of loess, which is closely related with its micro structural character. In this paper, the authors firstly obtained simple micro-structural parameters both on loess samples of before and after collapsing from the Electron Scanning Microscope images, then made a comparative analysis of relationship among these simple parameters and constructed synthetic micro-structural parameters. Finally the authors presented equations for prediction the relationship between collapsibility coefficient and synthetic micro-structural parameters. It is shown that the collapsibility of loess can be evaluated objectively using the proposed method. The study provides efficient exploration in quantificational studying the effects of microstructure on collapsibility of loess.

17 March 2006
Verified
Conference Paper
Closed access
MLMao-Tian Luan
Mao-Tian Luan
SLShun-Qun Li
Shun-Qun Li
Qing YangQing Yang
Qing Yang
In order to define correlation of shear strength with matric suction which further depends on water contents for unsaturated soils, it is recognized by examining four-grain packed system in this paper that in additional to the conventional matric suction distributed on contact area of water, there exists a normal tension force which is distributed along the saturation line on grain surface due to surface tension while the air-water interface overlaps on particle surface. The line-distributed tension can be transformed equivalently into a distributive tension stress which is defined as tension suction and will pose the similar effect on shear strength and deformation as that of matric suction. According to the actual contact states of air-water interface with the surface of soil particles, the unsaturated soil with the characteristics of continuous water with continuous air (CWCA) can be further classified into the overlapping and non-overlapping unsaturated soil. The tension suction appears only in the unsaturated soils of discontinuous water with continuous air (DWCA) and overlapping continuous water with continuous air (CWCA). The thermodynamics and geometric conditions are considered to establish a set of nonlinear equations for defining the air-water interface shape between two mono-sized spheres. These nonlinear equations are solved by iterative procedure for different combinations of contact angles and water contents to obtain theoretical matric and tension suctions in a four-grain packed system with isolated pore water. Then the equivalents of matric and tension suctions are made in order to take both intensity and action area of matric and tension suctions on grain surface into consideration. For the unsaturated soils of DWCA with different contact angles, it is concluded that the ratio of tension suction to matric suction increases from a small value to 2.5 or 4 with increasing saturation degree. It is implied that the tension suction cannot be overlooked. The matric suctions falls down sharply with increase of saturation degree whereas tension suction is almost kept constant and is larger than matric suction from a saturation degree around 8 percent. The resultant suction of both matric and tension suctions in the meaning of equivalence varies slightly with saturation degree and may be taken as a constant which can well agree with the experimental observations that shear strengths almost keep constants with increasing matric suctions as soils approach to completely dry.

1 March 2020 in JOURNAL OF SHENZHEN UNIVERSITY SCIENCE AND ENGINEERING
Verified
Journal Article
Closed access
SLShunqun Li
Shunqun Li
FZFan Zhang
Fan Zhang
YWYanyang Wang
Yanyang Wang
JXJinhong Xia
Jinhong Xia
Zhixiang ChenZhixiang Chen
Zhixiang Chen
In order to study the relationship among soil, water and ice in the thermal conductivity of soil during freezing, we establish the thermal conductivity calculation model based on frozen soil skeleton. The skeleton model consists of the soil skeleton and the ice skeleton, as well as the relationship among the three phases of soil, water and ice. When the temperature decreases to the initial freezing temperature, the pore water far away from the soil particles freezes into ice nuclei first. With the decrease of temperature, the ice core gradually expands to form a perforated pore ice skeleton. The unfrozen water in the frozen soil exists between the soil skeleton and the ice skeleton. According to the ideal model of spherical contact, we put forward the hybrid heat transfer mode which is composed of soil skeleton and ice skeleton, which are independent of each other, soil skeleton mixed with unfrozen water and ice skeleton mixed with unfrozen water. We also establish the three-phase composite heat transfer model of soil, water and ice based on saturated frozen soil and the thermal conductivity model of frozen soil. According to the model, we can obtain the thermal conductivity of frozen soil below 0 ℃. Compared with the calculated values of Johansen method and the mixed flow method, the results of transient method show that the calculated value of composite heat transfer method is larger than the measured value in the range of -5~0 ℃, the reason is that the pore ice skeleton is not mature. When the temperature is below -5 ℃, the calculated value of the composite heat transfer method is larger than the measured value, which is due to the hydrothermal migration in the frozen soil. The calculated values of the composite heat transfer method are between those of the Johansen method and those of the mixed flow method. The overall calculation accuracy is better than that of the Johansen method, and the relative difference between the calculated values and the measured values is less than 10%.

1 January 2018 in JOURNAL OF SHENZHEN UNIVERSITY SCIENCE AND ENGINEERING
Verified
Closed access
SLShunqun Li
Shunqun Li
CGChao Gui
Chao Gui
JXJinhong Xia
Jinhong Xia