The realisation of a thermo-optically controlled symmetric Mach-Zehnder interferometer switch based on an AlGaAs/GaAs epitaxial waveguide structure operating at wavelengths in the region of λ=1550 nm is reported. The device is based on a very compact two-dimensional photonic crystal channel waveguide structure. The measured and simulated transmission spectra for the devices are in good agreement. The π-phase shift switching power for the device is as low as 42 mW.
1 February 2019 in Journal of Structural Engineering
This article deals with the dynamic behavior of a reinforced and posttensioned concrete structure for applications in wind turbine towers. Measurements were performed using triaxial accelerometers in a 30 m high tower model, and the experimental setup is described in detail. The natural frequencies and mode shapes of the structure were extracted using operational modal analysis (OMA). The structure’s Young’s modulus was calculated analytically from the natural frequency of the radial-circumferential bending mode and their values were compared with the results obtained in static tests conducted on a concrete bar. The dynamic stiffness was calculated based on the frequency of the bending mode. Soil–foundation–structure interaction is reported in this article by calculating the displacement produced in the foundation and tower structure using data from the first tower bending mode. A simplified finite-element model was created to study the influence of elasticity and stiffness parameters on the modal shape of the structure and validate the results obtained from the experimental data.
We have designed and fabricated a 2D photonic crystal (PhC) asymmetric Mach–Zehnder (M-Z) device structure using W1 channel waveguides oriented along directions in silicon-on-insulator material. The asymmetric structure was designed using a PhC lattice with different filling factors. The asymmetry is obtained as a difference of two periods in the physical path length () between the arms, and it was sufficient to produce a π phase shift in the region of operation around . The asymmetric M-Z structure is more sensitive than a symmetric M-Z structure to changes in the refractive index and therefore becomes an interesting platform for switching and sensor devices.