5 May 2023 in Applied Surface Science
15 February 2023 in Journal of Vacuum Science & Technology A
Plasma-enhanced atomic layer deposition of SiNx is promising for many device applications, but a lack of growth and material property conformality on three-dimensional device surfaces limits its application. Changing the neutral composition of the nitridation plasma can have an impact on side wall nitridation. In plasma deposition experiments, the role of frequency of the delivered power on neutral species formation is underexplored. We measure the densities of various neutral species generated in a capacitively coupled, 300 mTorr ammonia/argon plasma as a function of driving frequency between 13.56 and 200 MHz using line-of-sight threshold ionization mass spectroscopy. High-density species, which are on the order of 1015 molecules/cm3, such as NH3, H2, H, and N2, as well as lower density species at densities on the order of 1012 molecules/cm3, including N2H2, N2H4, and N2 metastables, were measured and their densities varied with drive frequency.
14 April 2026 in Physical Review B
The origin of intrinsic stress in amorphous and structurally disordered carbon films remains a fundamental challenge. Numerous previous studies have focused on deposition parameters and their relationship with stress, resulting in the hypothesis that a high sp 3 -C fraction is a key factor governing compressive stress. However, the precise role of geometrical parameters in stress generation is still unknown. Here, we show that intrinsic stress is mainly dominated by two geometrical parameters: standardized bond length and density, followed by sp 3 -C fraction. We found that the high sp 3 -C fraction independently contributes to tensile stress, contrary to previous experimental results. A data-driven assisted investigation of various amorphous carbon models prepared using first-principles calculations quantitatively revealed the effect of each parameter by isolating their contributions. As a result, a generalized formula is proposed to correlate the intrinsic stress and fundamental structural parameters.
24 August 2021 in Physical Review E
We present detailed spatiotemporal measurements of rf magnetic fields and plasma conduction current as well as the corresponding plasma density profiles when very-high-frequency 100-MHz waves are introduced to a parallel plate plasma. The magnetic probe, optical emission, and plasma absorption probe measurements support a model in which the interaction of high-frequency waves with the moving plasma sheath at specific phases of the very high frequencies (VHF) period leads to local reversals in the vertical rf electric field which can lead to conduction current reversals and circulations. The presence of current reversals and circulation correlate with measured plasma uniformity. In particular, measured electric field and current reversals coincide with the strongly center-peaked plasma density profiles frequently observed in VHF plasma. The magnitude of the center peak increases with the number and magnitude of the current reversal cells. The scale length of the current reversal cells is on the order of what is expected for plasma surface waves. Measurements indicate that plasma conductivity is the common scaling factor for both plasma uniformity and the circulation. The propagation of high-frequency waves and the generation of rf current reversal in one phase of the rf cycle rather than another results in the appearance of harmonics in Fourier decomposed magnetic probe wave forms. These harmonics turn out not to be actual waves or evidence of standing waves at these frequencies but rather consequences of packets of wave propagation that occur periodically.
8 January 2026 in Journal of Vacuum Science & Technology A
Our study explores a plasma-free approach to remove H+/Cl− pairs, a common reaction by-product, after chlorosilane-type Si precursors (such as dichlorosilane and SiH2Cl2) dissociate on a hydrogen-terminated SiN surface. Although previous studies have suggested that H radicals in NH3 and CH3NH2 plasma may remove some Cl impurities, these methods have limitations that in high-aspect-ratio structures, the recombination of radicals may be too fast rendering them unable to reach the trench bottom intact[H. C. M. Knoops et al., J. Electrochem. Soc. 157, G241 (2010)]. This may lead to Cl accumulation at the trench and passive layer formation, which inhibits further film growth and reduces conformality. Introducing polar molecules, such as NH3, N2H4, CH3NH2, and (CH3)2NH, is an alternative solution. Density functional theory calculations show that when these polar molecules interact with the surface, they first abstract H+ from the H+/Cl− pair and capture Cl−, which may then be solvated by surrounding polar molecules to form a “microsolvation cluster.” This cluster is energetically stable and envelops Cl− while weakening the interactions between Cl− and surface amine groups, creating a pathway for HCl desorption with a lower energy cost. Our metadynamics simulations show that when the surface is saturated with CH3NH2 molecules, the energy barrier for HCl desorption can be reduced significantly from 0.5 to 0.3 eV at 300 K, resulting in a ∼5000 times increase in the desorption rate, assuming an Arrhenius rate expression. Our findings suggest that by-products generated by halogen-containing precursors can be removed at room temperature via “microsolvation cluster” formation, without requiring plasma assistance.