Nivesh Mangal

Nivesh Mangal

Auto-generated profile, based on publicly available information

Nivesh Mangal

IMEC, Belgium

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 February 2021 in Optics Express
Verified
Journal Article
Closed access
NMNivesh Mangal
Nivesh Mangal
BSBradley Snyder
Bradley Snyder
JCJoris Van Campenhout
Joris Van Campenhout
GSGeert Van Steenberge
Geert Van Steenberge
JMJeroen Missinne
Jeroen Missinne
To increase the manufacturing throughput and lower the cost of silicon photonics packaging, an alignment tolerant approach is required to simplify the process of fiber-to-chip coupling. Here, we demonstrate an alignment-tolerant expanded beam backside coupling interface (in the O-band) for silicon photonics by monolithically integrating microlenses on the backside of the chip. After expanding the diffracted optical beam from a TE-mode grating through the bulk silicon substrate, the beam is collimated with the aid of microlenses resulting in an increased coupling tolerance to lateral and longitudinal misalignment. With an expanded beam diameter of 32 μm, a ±7 μm lateral and a ±0.6° angular fiber-to-microlens 1-dB alignment tolerance is demonstrated at the wavelength of 1310 nm. Also, a large 300 μm longitudinal alignment tolerance with a 0.2 dB drop in coupling efficiency is obtained when the collimated beam from the microlens is coupled into a thermally expanded core single-mode fiber.

13 August 2019 in IEEE Journal of Selected Topics in Quantum Electronics
Verified
Journal Article
Closed access
NMNivesh Mangal
Nivesh Mangal
BSBradley Snyder
Bradley Snyder
JCJoris Van Campenhout
Joris Van Campenhout
GSGeert Van Steenberge
Geert Van Steenberge
JMJeroen Missinne
Jeroen Missinne
We demonstrate an alignment-tolerant backside coupling interface in the O-band for silicon photonics by generating an optimized through-substrate (downward) directionality beam from a TE-mode grating coupler and hybrid integrating the chip with backside silicon microlenses to achieve expanded beam collimation. The key advantage of using such an expanded beam interface is an increased coupling tolerance to lateral and longitudinal misalignment. A 34 μm beam diameter was achieved over a combined substrate thickness of 630 μm which was then coupled to a thermally expanded core single-mode fiber to investigate the tolerances. A 1-dB fiber-to-microlens lateral alignment tolerance of 14 μm and an angular alignment tolerance of 1° was measured at a wavelength of 1310 nm. In addition, a large -2.5 μm 1-dB backside alignment accuracy was measured for the placement of microlens with respect to the grating. The radius of curvature of Si microlens to achieve a collimated beam was 480 μm, and a 1-dB longitudinal alignment tolerance of 700 μm was measured for coupling to a single-mode expanded core fiber. The relaxation in alignment tolerances make the demonstrated coupling interface suitable for chip-to-package or chip-to-board coupling.

1 January 2018
Verified
Conference Paper
Closed access
PDF file
BSBradley Snyder
Bradley Snyder
NMNivesh Mangal
Nivesh Mangal
GLGuy Lepage
Guy Lepage
SBSadhishkumar Balakrishnan
Sadhishkumar Balakrishnan
XSXiao Sun
Xiao Sun
JCJoris Van Campenhout
Joris Van Campenhout
We address the challenges in realizing low-loss, broadband optical interfaces for high-density fiber or polymer waveguides along with through-silicon via interconnects in a 50 GHz silicon photonics interposer platform suitable for 2.5D/3D packaging with advanced CMOS logic.

23 May 2019 in IEEE Photonics Journal
Verified
Journal Article
Open access
NMNivesh Mangal
Nivesh Mangal
JMJeroen Missinne
Jeroen Missinne
GSGeert Van Steenberge
Geert Van Steenberge
JCJoris Van Campenhout
Joris Van Campenhout
BSBradley Snyder
Bradley Snyder
Most of the single-mode fiber-coupled grating couplers reported in the literature have been designed for upward directionality to perform wafer-scale testing of photonic integrated circuits. A coupler designed for downward directionality can help in achieving a face-up electro-optic integration scheme for chip-to-board coupling using 2.5D/3D silicon photonics interposers. We demonstrate for the first time the design analysis and coupling performance of TE-polarized O-band through-substrate (backside emitting) grating couplers that have been optimized to produce enhanced directionality in the downward direction into the bulk silicon substrate of a Si photonics chip. The chip substrate was thinned and polished to achieve a bulk silicon thickness of 100 μm. By the use of an optimized reflector and an optimal thickness of anti-reflection coating at the backside of the chip, a -2.3 dB and -1.7 dB fiber-to-grating coupling efficiency has been measured when coupled through-substrate to a singlemode and multimode fiber respectively. These gratings with downward directionality can help provide an efficient and alignment-tolerant interface for chip-to-chip or chip-to-board optical interconnects.

14 January 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
NMNivesh Mangal
Nivesh Mangal
JMJeroen Missinne
Jeroen Missinne
JCJoris Van Campenhout
Joris Van Campenhout
BSBradley Snyder
Bradley Snyder
GSGeert Van Steenberge
Geert Van Steenberge

1 January 2018
Verified
Conference Paper
Closed access
PDF file
NMNivesh Mangal
Nivesh Mangal
JMJeroen Missinne
Jeroen Missinne
GRGunther Roelkens
Gunther Roelkens
JCJoris Van Campenhout
Joris Van Campenhout
GSGeert Van Steenberge
Geert Van Steenberge
BSBrad Snyder
Brad Snyder
We demonstrate an alignment tolerant through-substrate coupling interface by combining an optimized downward-directionality grating on a silicon photonic chip with a hybrid integrated polymer lens, generating a collimated beam at λ=1310nm for more than 600μm.