20 January 2016 in Nature
29 January 2013 in Journal of the Electrochemical Society
Substantially reduced energy and power capabilities of lithium-ion cell operating at low temperatures pose a technical barrier for market penetration of hybrid electric vehicles and pure electric vehicles. The present work delineates Li-ion cell behaviors at low temperatures by a combined experimental and modeling approach. An electrochemical-thermal coupled model, incorporating concentration- and temperature-dependent transport and kinetic properties, is applied and validated against 2.2Ah 18650 cylindrical cells over a wide range of temperatures (−20°C to 45°C) and discharge rates. Simulation and experimental results demonstrate the dramatic effects of cell self-heating upon electrochemical performance. A nonisothermal Ragone plot accounting for these important thermal effects is proposed for the first time for Li-ion cells and more generally for thermally coupled batteries. Detailed resistance analysis indicates that performance limits at −20°C depend on not only discharge rates but also thermal conditions. Optimization of cell design parameters and material properties is performed for 1 C rate discharge starting from −20°C, where the principal performance limitations are found to be Li+ diffusion in the electrolyte and solid-state Li diffusion in graphite particles, instead of charge-transfer kinetic or ohmic resistance.
1 September 2013 in Electrochimica Acta
1 July 2010 in Electrochimica Acta
1 January 2010 in Journal of the Electrochemical Society
Liquid water transport at the pore level in a composite microporous layer (MPL) and carbon paper gas diffusion layer (GDL), used in a proton exchange membrane fuel cell (PEMFC), has been simulated for the first time by a topologically equivalent pore network (TEPN). Extracted from stochastic generated three-dimensional porous media that replicate typical patterns of void space and fiber connectivity observed in high resolution two-dimensional images of carbon paper GDL and a regular MPL made of carbon black and poly(tetrafluoroethylene), the TEPN for the composite diffusion media is used as input to an invasion percolation flow simulator. Steady-state liquid water distribution and saturation profiles in the MPL–GDL composite media are determined. In the interfacial region between the MPL and the GDL, liquid water saturation increases sharply due to a dramatic change in pore size, confirming the saturation discontinuity modeled in the continuum approach. The effects of current density and MPL thickness on liquid water saturation profiles are also explored. The results suggest that, in contrast to the MPL, liquid water saturation in the GDL is less affected by the current density. A thicker MPL helps to achieve a lower saturation level in the GDL by reducing the number of liquid injection sites into the GDL.