1 January 2021 in Latin American Journal of Solids and Structures
The constant strain rate loading and dynamic stress equilibrium are prerequisites for ensuring the experimental data of the Split Hopkinson Pressure Bar (SHPB). In order to achieve this requirement, a proper pulse shaper dimensions were used in the experiment. For this purpose, the pulse shaper diameter, thickness and strength and the strike bar length and its velocity on the incident pulse are studied by ∅80mm SHPB apparatus. Then, the parameters affecting the two key inflection points and three loading areas of the incident pulse are discussed. In addition, the improved methods for two typical non-constant strain rate waveforms for the concrete experiments are obtained based on the regular pulse shaping. Moreover, SHPB experiments are conducted for concrete by employing different pulse shaper dimensions. The results show that more valid data can be obtained by employing the pulse shaper with large thickness when the strain rate is non-constant during the experiment. The conclusions and method provide guidance for selecting pulse shaper for concrete SHPB experiments.
17 March 2025 in Journal of Materials Engineering and Performance
1 March 2026 in Journal of Physics: Conference Series
To address the poor adaptability of traditional mortar baseplates on urban hard ground, a novel T-shaped combined baseplate structure is proposed. It consists of three parts—the main body, fixed shaft, and adjustable fixed plate—enabling rapid field assembly and stable launching across different terrains. A Three-Dimensional finite element model of the baseplate–gun tail assembly is established based on elastoplastic theory, and multi-condition simulations under firing loads are performed using an explicit dynamic algorithm. Results indicate that the maximum stress (575.8 MPa) occurs at the T-shaped baseplate–fixed shaft connection, below the material yield strength (860 MPa) with a safety factor of 1.5, meeting strength requirements. The maximum backward displacement is 20.3 mm at a 75° firing angle, demonstrating launch stability on concrete ground. This study offers a new theoretical and technical basis for optimizing mortar recoil devices in urban combat.
1 December 2025 in Mechanics of Solids
Annular shaped charges are essential components in modern tandem warhead systems; however, traditional configurations such as shaped charge jets (SCJ), rod-based jets (JPC), and explosively formed penetrators (EFP) often fail to meet the stringent 1 : 1 aperture-to-charge-diameter requirements. This study introduces a novel W-truncated annular shaped charge design, evaluated through a combined approach of numerical simulations and experimental validation. The investigation reveals a three-stage jet formation process—charge liner collapse, radial convergence, and jet stretching—highlighting the dynamic interactions between the truncated structure and the inner and outer liners. Additionally, the effects of structural parameters, including outer and inner cone angles, truncation length, and outer charge liner height, are systematically analyzed to establish a comprehensive theoretical basis for design optimization in achieving precise penetration and effective damage in tandem warhead applications.