15 April 2016 in MATEC Web of Conferences
This paper deals with the flexural behaviour of textile-reinforced concrete (TRC). Two samples of TRC made of high strength reinforcing fabrics made of glass and carbon rovings were produced. Three-point bending test was carried out to examine the flexural performance of the developed samples. The maximum flexural strength and reinforcement efficiency were calculated. Experimental results showed that that all types of applied fabric reinforcement contributed to increases strength as compared to nonreinforced concrete. Furthermore, the deformation behavior of reinforced concrete was analyzed. The advantage is in higher residual load-bearing capacity, which allows maintaining the integrity of the structure.
1 August 2013 in Magazine of Civil Engineering
The problem of pulling the reinforcing bar from the concrete block is urgent for the practice, as it represents the most widespread method of experimental evaluation of characteristics of reinforced-concrete bond behavior, which are necessary for an estimation of the strength and durability of reinforced concrete structures. Fracture process of bonds at pulling the rebar from the concrete is a complex multistep process, accompanied by the presence of inhomogeneous and inelastic deformation, a rupture of adhesive bonds, the initiation and propagation of cracks of different shape and orientation, the presence of contact and tribological phenomena. The nonlinear finite-element solutions of the problem of pulling the reinforcing bar from the concrete block have been obtained with using various models of bond behavior and concrete cracking. The comparison of obtained numerical results with experimental data has been presented and discussed. The first part of the article is devoted to the models taking into account the discontinuity of the connection, while the second part is concerned with the models without explicitly taking into account of discontinuities
1 December 2013 in Advanced Materials Research
A direct 3D finite element (FE) modeling of fracture processes in reinforced concrete bridge structures is considered with account of the macrocracks initiation and propagation, real geometry of reinforcing elements, discontinuity in the bond-slip behavior, using elastic-plastic-damage constitutive equations for concrete. The comparison of obtained FE results with experimental data is presented and discussed for the pulling ribbed bars out of concrete blocks, the spalling of concrete cover at the automobile bridge and cracking of ballastless deck at the railway bridge.
25 September 2015 in Materiali in tehnologije
11 August 2016 in MATEC Web of Conferences
A direct finite element modeling of the pulling process of the steel reinforcing bar out from the concrete block with taking into account the cohesive behavior of steel-concrete bond and using elastic-plasticdamage constitutive equations for the concrete is considered. The comparison of obtained results of finite element simulations with experimental data is presented and discussed for the problem of pulling the reinforcing bar from the concrete block.
24 March 2017 in Thermal Engineering
For the manufacture of blades for modern gas-turbine installations, monocrystalline alloys are used. Traditional methods for the calculation of stressed-deformed state and safety factors for these alloys developed and verified for polycrystalline materials need to be adjusted. This paper deals with methodological principles for an approach to the solving of the problem concerning a finite-element determination of the long-term static strength for cooled monocrystalline blades employed in gas-turbine installations based on the use of two different models (phenomenological and micromechanical) considering the inelastic deformation of monocrystalline superalloys. An analysis has been performed for the distribution of Schmid factors in the spherical triangle for primary and secondary octahedral and cubic slip systems. Calculations are performed using Larson–Miller’s parametric dependences taking into account the crystallographic orientation of the material. A determination procedure for the anisotropy coefficients of long-term strength is described based on data for different orientations. A comparative analysis of the results of finite-element calculations made using phenomenological and micromechanical (crystallographic) creep models for the long-term static strength of cooled monocrystalline blades used in a gas-turbine engine has been performed. It is shown that the location of the most loaded sections of such a blade coincide with the results of calculations according to these models. It has been found that the micromechanical deformation model results in the obtaining of the most conservative estimate for the long-term strength of turbine blades made of monocrystalline alloys. It is shown that the calculations using models for materials with isotropic properties can produce considerable errors in determining the durability of the blades. The possibility is considered for using 1D-, 2D-, and 3D-models for turbine monocrystalline blades in the determination of their durability parameters.