Thermally insulating materials, made from earth-abundant and sustainable resources, are highly desirable in the sustainable construction of energy efficient buildings. Cellulose from wood has long been recognized for these characteristics. However, cellulose can be a flammability hazard, and for construction this has been addressed via chemical treatment such as that with halogen and/or phosphorus, which leads to further environmental concerns. Fortunately, the structure of cellulose lends itself well to chemical modification, giving great potential to explore interaction with other compounds. Thus, in this study, cellulose nanofibers (CNFs) were nano-wrapped with ultrathin 1T phase molybdenum disulfide (MoS2) nanosheets via chemical crosslinking, to produce an aerogel. Thermal and combustion characterization revealed highly desirable properties (thermal conductivity k = 28.09 mW m−1 K−1, insulation R value = 5.2, limit oxygen index (LOI) = 34.7%, total heat release = 0.4 MJ m−2). Vertical burning tests also demonstrated excellent fire retardant and self-extinguishing capabilities. Raman spectra further revealed that MoS2 remained unscathed after 30 seconds of burning in a 1300 °C butane flame. Considering the inherently low density of this material, there is significant opportunity for its usage in a number of insulating applications demanding specific fire resistance properties.
Porous carbon materials are widely used in particulate forms for energy applications such as fuel cells, batteries, and (super) capacitors. To better hold the particles together, polymeric additives are utilized as binders, which not only increase the weight and volume of the devices, but also cause adverse side effects. We developed a wood-derived, free-standing porous carbon electrode and successfully applied it as a cathode in Li-O2 batteries. The spontaneously formed hierarchical porous structure exhibits good performance in facilitating the mass transport and hosting the discharge products of Li2O2. Heteroatom (N) doping further improves the catalytic activity of the carbon cathode with lower overpotential and higher capacity. Overall, the Li-O2 battery based on the new carbon cathode affords a stable energy efficiency of 65% and can be operated for 20 cycles at a discharge depth of 70%. The wood-derived free-standing carbon represents a new, unique structure for energy applications.
Gel-grown single-crystal composites where gel networks are incorporated inside single-crystals have been reported in an increasing number of studies, with the composite structure similar to that of the biogenic biomacromolecule-incorporated single-crystals. However, the mechanisms of the gel incorporation are still not clear. In this work, we examined the growth of four types of crystals (NaF, NaCl, KBr and potassium dihydrogen phosphate (KDP)) in both silica gels and agarose gels to assess the effects of the crystal–gel interaction and the gel structure on the gel incorporation. In all of the eight crystal–gel pairs, single-crystals were obtained by single-crystal X-ray diffraction analysis. Dissolution of the crystals revealed that all of the four types of crystals grown from the agarose gels incorporated the gel networks during crystallization. In contrast, NaF and KDP crystals incorporated the silica gel networks but NaCl and KBr did not when grown from silica gels. The discrepancies among the eight crystal–gel pairs suggest that crystal–gel interaction (hydrogen bond) and fibre-like gel structure with large gel strength favour the gel incorporation. This work may facilitate understanding of the formation mechanisms of single-crystal composites.