25 January 2022 in IEEE/ASME Transactions on Mechatronics
Compliance control is important for the realization of disturbance absorption in biped robots. However, under a sustained disturbance, compliance control causes the robot’s balance to deteriorate because of its floating base nature. Humans address this problem by resisting external disturbance. When pushed, a human will reconcile their posture with the applied external force and then push back to maintain balance. Inspired by this behavior, we propose a compliance control strategy for biped robots called resistant compliance, which allows a robot to comply with the external disturbance initially and then repel the disturbance to reduce the imbalance caused by the reconciliatory motion. As a result, the robot can obtain improved environment-interaction stability and react more like a typical human, thus making both its locomotion and its interactions more stable and safer. To realize this control strategy, the virtual-mass-model (VMM) control is redesigned to unify the disturbances from unexpected external forces and an inclined floor. Then, the VMM control is combined with the linear-inverted-pendulum model to realize resistant compliant motion. Model predictive control is used to track the reference zero-moment-point trajectory, which is essential for locomotion. To validate the proposed control strategy, the method is implemented on the human-sized humanoid robot BHR-T.
14 April 2022 in IEEE Transactions on Fuzzy Systems
Stability control for humanoid robots based on zero moment point (ZMP) control and impedance control are widespread. However, uncertain changes in the center of mass (CoM) height for ZMP control and specific regulation of the variable stiffness of impedance control have been challenging issues in previous studies. In this article, these two problems are solved by implementing fuzzy control-based regulations. First, the fuzzy ZMP controller, which regulates the feedback gains online based on the CoM height change and CoM tracking errors, is proposed. Second, we propose a fuzzy regulation law for variable stiffness, which is applied for uncertain contact situations and inspired by the pattern of human muscle stiffness. With these two methods, the ground adaptability for humanoid robots is enhanced. The proposed method is validated with experiments on a real robot platform, BHR-T.
26 September 2023 in IEEE/ASME Transactions on Mechatronics
To generate dynamically feasible running motion for humanoid robots, one conventionally chooses between a simplified model and a full-body model. A simplified model can be calculated at high rates but ignores many of the robot's dynamic features, while a full-body model usually leads to time-consuming nonlinear programming. This article explores a powerful middle ground that takes the advantages of both worlds and proposes a running pattern generation method that can optimize the whole-body motion online. A three-body model generates the centroidal motion, including the center of mass position and the angular momentum. Then, we propose the so-called reference-tracking dynamics, where the collocated motion references in task space are projected to the joint space with serial quadratic programming. The separation of collocation and projection greatly reduces the scale of the problem. In addition, the two major motion references, centroidal and foot motion, can be handled separately to furtherly simplify the problem. Experiments on the humanoid robot platform BIT Humanoid Robot - Test (BHR-T) show that this method can generate fast and dynamically feasible running motion online, where running at 6 km/h is achieved.
27 October 2023 in IEEE/ASME Transactions on Mechatronics
Toward swift running on biped robots, this article provides a complete design approach for a robot leg featuring reduced rotational inertia and introduces a novel mechanic optimization scheme to meet severe mechanical requirements. We adopt a ballscrew driving setup to design the inertia-reduced driving for the leg. When designing the actuator's transmission to satisfy the joints' speed and torque demands, it is challenging to specify the mechanism parameters because their effects are nonlinear and highly coupled. To address this problem, we invite a novel idea that uses target motion trajectories to guide the optimization process and make the mechanism fit the motion best. For that purpose, the joint space position is divided into a high-speed and high-torque region by analyzing the target joint trajectories. Then, the optimization scheme is formulated according to this division to obtain the optimized joint position–transmission ratio curve. The proposed technique can dramatically reduce the torque demands, making a good tradeoff in reconciling the dilemma between the joint speed and torque demands. Finally, the proposed scheme is validated with a 7 km/h running motion on the biped robot BHR-T, enhancing the robot with the desired athletic capacities.