31 January 2019 in IEEE Transactions on Power Systems
The deployment of distributed energy resources, combined with a more proactive demand side management, is inducing a new paradigm in power system operation and electricity markets. Within a consumer-centric market framework, peer-to-peer approaches have gained substantial interest. Peer-to-peer markets rely on multi-bilateral negotiation among all agents to match supply and demand. These markets can yield a complete mapping of exchanges onto the grid, hence allowing to rethink the sharing of costs related to the use of common infrastructure and services. We propose here to attribute such costs through exogenous network charges in several alternative ways i.e. uniformly, based on the electrical distance between agents and by zones. This variety covers the main grid physical and regulatory configurations. Since attribution mechanisms are defined in an exogenous manner to affect each P2P trade, they eventually shift the market issue to cover the grid exploitation costs. It can even be used to release the stress on the grid when necessary. The interest of our approach is illustrated on a test case using the IEEE 39 bus test system, underlying the impact of attribution mechanisms on trades and grid usage.
28 November 2022 in Structural and Multidisciplinary Optimization
24 July 2018 in IEEE Transactions on Energy Conversion
This article focuses on a 2D analytical model for a fast computation of magnetic losses due to eddy currents in the permanent magnets as well as iron losses in the ferromagnetic parts within coaxial magnetic gears. The magnetic field distribution is computed in yokes and permanent magnets by solving both Maxwell's equations, whereas for pole pieces the magnetic field is computed by coupling the previous analytical model with a reluctance network model. Both the eddy current losses and iron losses are determined from this hybrid analytical model. The iron loss model takes into account the temporal and spatial variations of flux density. The eddy current loss model takes into account the magnet splitting. Results of this magnetostatic eddy current loss model are then compared to the results obtained with a 2D magnetodynamic finite element model. A verification of validity limits is also proposed. The final function of this analytical model is to ensure integration into a set of models in the aim of a global mechatronic optimization of magnetic gears, for their insertion into a multi-megawatt wind turbines. A preliminary bi-objective, mass-efficiency optimization protocol is subsequently proposed along with an analysis of the computation time reduction via the presented models.
22 December 2021 in Proceedings in Applied Mathematics and Mechanics
Topology optimization (TO) has been extensively studied in the past decades especially in mechanical engineering. Among different techniques, density‐based methods have become very popular. In electrical engineering, TO has been applied essentially to linear actuators [1] or machines rotors [2] [3], but few works such as [4] deal with the coil repartition within the stator of rotating machines.In this study, we investigate a density‐based topology optimization method, which aims to maximize the average torque of a rotating electrical machine from random or uniform initial material repartition. Material properties such as magnetic permeability or current density are interpolated on densities between each material to obtain a differentiable optimization problem, using SIMP or RAMP [5] for example. A custom magnetostatic finite element solver was implemented on MATLAB®. It takes into account the non‐linearity of magnetic materials with Newton‐Raphson method. The optimization algorithm relies on sensitivities obtained by the adjoint variable method (AVM) [6]. The methodology was performed for two test cases :• optimization of iron/air repartition within the rotor of a synchronous reluctant machine (SRM)• optimization of coils/iron/air repartition within the stator of a one phase permanent magnet synchronous machine (PMSM).In the air/iron case, a filtering technique inspired by ESO [7] is applied: iron which carries few magnetic flux is removed. No filtering was applied in the multi‐material case, but a normalization of the gradient was investigated.As a result, we obtain flux barriers [8] for the optimized SRM rotor, which correspond to industrial designs. However, some convergence issues happened, especially for multi‐material optimization. The gradient normalization helps preventing this phenomenom but leads to surprising asymmetric designs, which need further investigations. It is also necessary to improve the robustness of the method especially for high current density, in order to optimize both the rotor and the stator. Multiphysics considerations will be taken into account in future work.