Single-stage multiport inverter offers direct power flow from the dc side to the ac side and has the advantages of compact size and low costs. However, due to its unbalanced dc-link voltages and coupled power features, it is challenging to realize desirable output current and flexible dc-port power allocation simultaneously. To address the above issues, this article proposes a direct duty cycle control-based power allocation strategy. The duty cycles can be solved based on the mathematical models of the single-stage multiport inverter via two stages. In the first stage, three duty cycles can be obtained by small hexagon selection according to the location of the reference voltage vector. In the second stage, the rest duty cycles are determined by solving the reference voltage vector synthesis and dc-port power tracking equations. Not only the output voltage/current quality is guaranteed, but also flexible dc-side power allocation can be realized under the unbalanced dc-link voltages. In addition, the proposed power allocation strategy has the advantages of simple concepts and fast dynamic response due to duty cycles being directly generated. Finally, the effectiveness of the proposed power allocation strategy is verified by islanded microgrid experimental tests.
12 March 2024 in IEEE Transactions on Power Electronics
The single-stage multiport inverter (SSMI) directly connects the hybrid energy storage system (HESS) to the ac side, which presents the merits of low cost and high efficiency due to the removal of dc–dc converter. The existing space vector modulation (SVM) schemes transplanted from the corresponding multilevel inverters cannot achieve bidirectional active power flow for both dc ports due to the limited degree of freedom. To this end, this article proposes an opposite vector modulation to release an extra degree of freedom for bidirectional active power allocation in the SSMI. A novel two-level inverter model of the SSMI is proposed to obtain the capability of generating opposite vectors, where the straight-forward relationship between dc-port power and opposite vector can be revealed. Then, vector phasor diagram-based theoretical analysis is proposed to demonstrate that the power allocation range is expanded by decomposing the reference voltage vector into opposite vectors. Finally, the experimental tests are conducted to verify the effectiveness of the proposed opposite vector modulation. Compared to conventional SVM strategies, not only bidirectional power allocation of both dc ports can be realized, but also the power allocation range has been increased by 21 $\%$ .
22 May 2024 in IEEE Transactions on Power Electronics
The single-stage multiport inverter (SSMPI) is a cost-effective and high-efficiency solution for multisource integration in islanded microgrids because the energy storage components can connect to the ac microgrid directly without intermediate dc-dc converters. However, it is challenging to design the modulation scheme for SSMPI due to the time-varying dc input voltages and requirement for power distribution between the energy storage components. To this end, this article proposes an asymmetric level-shifted pulsewidth modulation (ALSPWM) scheme for flexible power distribution of the SSMPI under time-varying dc input voltage. In the proposed ALSPWM scheme, proportional variation and asymmetric carriers are defined to ease system modeling under the time-varying dc input voltage in SSMPI. Besides, an instantaneous power model based on non-negative three-phase modulation waves is derived, and a zero-sequence voltage injection method is proposed for desired power distribution control. With the proposed ALSPWM, the flexible power distribution between the energy storage components and superior grid current control of the SSMPI under time-varying dc input voltages, along with reduced computational burden, are realized. Finally, the effectiveness of the proposed ALSPWM scheme is verified on an SSMPI-connected islanded microgrid platform.
7 October 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Integrating the energy storage system (ESS) into photovoltaic (PV) generation systems is an effective solution to realize frequency support. The single-stage multiport inverter (SSMI) offers a high-efficiency solution for PV-ESS hybrid systems compared to conventional two-stage configurations due to the removal of dc/dc converter. However, it is challenging to realize maximum power point tracking (MPPT) and frequency support simultaneously due to the coupled power flows in SSMI. To address this issue, two independent power buffers are developed to smooth PV generation fluctuations and deal with frequency change. On top of that, a unified control is proposed to coordinate the power buffers by regulating the charge/discharge of ESS. Besides, the operation capacity and stability analysis of the proposed unified coordination strategy are derived in detail. Finally, experimental tests are carried out to verify the effectiveness of the proposed solution. With the proposed unified coordination strategy, the MPPT of the PV unit and desirable frequency support are realized simultaneously. Moreover, the proposed SSMI-based solution shows around 2% higher system efficiency than the conventional two-stage strategies.
28 March 2025 in IEEE Transactions on Power Electronics
The single-stage dual-dc-port inverter directly connects the photovoltaic-battery hybrid system to the ac side, which offers the advantages of high efficiency and low cost due to the removal of dc–dc converter. The existing modulation-based power distribution strategies realize flexible power flow control by indirectly regulating redundant zero or small vectors via additional outer loop power controllers, which have the drawbacks of limited steady-state and dynamic response. To address this issue, the relationship between the dc-port power and large/small vectors is analytically revealed, which provides intuitive parameter design guidelines for power distribution control. On this basis, a direct power distribution strategy based on space-vector modulation is proposed, which regulates the dc-port power by splitting the reference voltage vector into large and small vectors. Compared to the conventional strategies, the proposed strategy shows better steady-state and dynamic response due to desirable power control directly realized in the modulation layer. Finally, the comprehensive comparison experimental tests are conducted to verify the effectiveness and advantages of the proposed direct power distribution strategy.
1 July 2026 in IEEE Transactions on Power Electronics
Model predictive control (MPC) provides an at tractive solution for the single-stage dual-dc-port inverter (SDI) due to its capabilities to deal with multiobjective control under unbalanced dc-port voltages. However, the existing MPC for SDI uses only one of the basic voltage vectors throughout the control period, which increases the dc-port power ripple and reduces current quality. To address this issue, the candidate voltage vectors are extended from 27 to 117 based on unevenly distributed basic voltage vectors, which reduces the dc-port power ripple and improves power quality due to extra control degree of freedom being provided. To reduce the computational burden caused by extended voltage vectors under unbalanced port voltages, the space vector diagram is divided into asymmetrical quadrangle sub-sectors, where the candidate voltage vectors required to be iterated are reduced by 82%. On this basis, an MPC based on discrete space vector modulation (SVM) is proposed for the SDI, enabling simultaneous grid current tracking and flexible power regulation. The comprehensive comparison experimental tests are conducted to verify the effectiveness and advantages of the proposed MPC based on discrete SVM.