Joseph Nkongho Anyi

Joseph Nkongho Anyi

Auto-generated profile, based on publicly available information

Joseph Nkongho Anyi

Department of Mechanical Engineering, Higher Technical Teachers Training College of the University of Buea in Kumba, P.O. Box 249 Buea Road, Kumba, Cameroon

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 August 2016 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
JAJoseph Nkongho Anyi
Joseph Nkongho Anyi
RNRobert Nzengwa
Robert Nzengwa
JAJean Chills Amba
Jean Chills Amba
CAClaude Valery NGAYIHI ABBE
Claude Valery NGAYIHI ABBE
We have developed a curved finite element for a cylindrical thick shell based on the thick shell equations established in 1999 by Nzengwa and Tagne (N-T). The displacement field of the shell is interpolated from nodal displacements only and strains assumption. Numerical results on a cylindrical thin shell are compared with those of other well-known benchmarks with satisfaction. Convergence is rapidly obtained with very few elements. A scaling was processed on the cylindrical thin shell by increasing the ratioχ=h/2R(half the thickness over the smallest radius in absolute value) and comparing results with those obtained with the classical Kirchhoff-Love thin shell theory; it appears that results diverge at2χ=1/10=0.316because of the significant energy contribution of the change of the third fundamental form found in N-T model. This limit value of the thickness ratio which characterizes the limit between thin and thick cylindrical shells differs from the ratio 0.4 proposed by Leissa and 0.5 proposed by Narita and Leissa.

1 January 2017 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
AFAchille Germain Feumo
Achille Germain Feumo
RNRobert Nzengwa
Robert Nzengwa
JAJoseph Nkongho Anyi
Joseph Nkongho Anyi
This research purposed a new family of finite elements for spherical thick shell based on Nzengwa‐Tagne’s model proposed in 1999. The model referred to hereafter as N‐T model contains the classical Kirchhoff‐Love (K‐L) kinematic with additional terms related to the third fundamental form governing strain energy. Transverse shear stresses are computed and C0 finite element is proposed for numerical implementation. However, using straight line triangular elements does not guarantee a correct computation of stress across common edges of adjacent elements because of gradient jumps. The gradient recovery method known as Polynomial Preserving Recovery (PPR) is used for local interpolation and applied on a hemisphere under diametrically opposite charges. A good agreement of convergence results is observed; numerical results are compared to other results obtained with the classical K‐L thin shell theory. Moreover, simulation on increasing values of the ratio of the shell shows impact of the N‐T model especially on transverse stresses because of the significant energy contribution due to the third fundamental form tensor present in the kinematics of this model. The analysis of the thickness ratio shows difference between the classical K‐L theory and N‐T model when the ratio is greater than 0.099.

3 December 2020 in Journal of Engineering
Verified
Journal Article
Open access
PDF file
MNMoïse Ligan Noukpo
Moïse Ligan Noukpo
CAClaude Valery NGAYIHI ABBE
Claude Valery NGAYIHI ABBE
JAJoseph Nkongho Anyi
Joseph Nkongho Anyi
EDESSOLA Dieudonne
ESSOLA Dieudonne
CACyrille Mezoue Adiang
Cyrille Mezoue Adiang
RNRobert Nzengwa
Robert Nzengwa
Maintaining the quality of breathing air in urban and industrial areas is one of the biggest challenges faced by humanity in the modern era. Diesel engines, as one of the main providers of energy supply for modern equipment and transport, are also unfortunately contributing highly to the deterioration of air quality. A recent research path on the limitation of diesel engine emissions is the use of alternative fuel from vegetable or animal fats or oil called biodiesel. Although the use of biodiesel has proven its efficiency in reducing emissions, it remains a problem to maintain the engine’s efficiency when shifting to biodiesel, especially due to its injection and atomization properties; most of the recent research focused on improving biodiesel fuel quality by blending it with traditional diesel fuel, but few works can be found on the regulation or control of diesel engine process when shifting to 100% biodiesel fuel (B100). This work proposes a fuel control strategy and methodology based on diesel engine operating data obtained from an experimentally designed rate of injection model (ROI) at different injection pressures and a jet and spray droplet distribution validated a two-zone model. Results show that B100 gives a higher amount of about 8% of injected fuel, a longer jet penetration of about 20 mm higher at 100 MPa injection pressure, a wider cone angle, and about a 40% increase of coarseness of the jet distribution. The experimental and numerical-based control strategy provides interacting relationships between B100 properties and specific engine features where actions shall be made to keep the engine’s efficiency when the shift is made; meanwhile, the algorithm provides a hierarchical step-by-step correcting procedure taking into account the possible degradation that could occur from the use of B100 in diesel engines.

18 October 2022 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
NRNzengwa Robert
Nzengwa Robert
DLDjopkop Kouanang Landry
Djopkop Kouanang Landry
BMBodol Momha Merlin
Bodol Momha Merlin
ACAmba Jean Chills
Amba Jean Chills
NJNkongho Anyi Joseph
Nkongho Anyi Joseph
ZAZoa Ambassa
Zoa Ambassa
In this paper we present a 2D four-parameter model that accounts for the variation of transverse deformation through-the-thickness in thick linear elastic shells. This model is deduced directly from the 3D elasticity equations of the traction-displacement boundary value problem. Transverse shear strains and thickness variation are accountable through additional terms which appear in the final equations besides well-known terms in the classical Kirchhoff-Love models for thin shells. A unique solution of the variational equation is established, and numerical and analytical results are compared with satisfaction.

13 May 2022 in PLOS ONE
Verified
Journal Article
Open access
PDF file
JAJoseph Nkongho Anyi
Joseph Nkongho Anyi
APAlexandra Tchamdjie Pouakam
Alexandra Tchamdjie Pouakam
JAJean Chills Amba
Jean Chills Amba
FEFongho Eric
Fongho Eric
PNPlaton Dongmo Nizegha
Platon Dongmo Nizegha
RNRobert Nzengwa
Robert Nzengwa
The target in this survey is to investigate deformations of laminates shells (DLS), due to asymmetric and axisymmetric loads, including several other loadings using N-T shell equations. We point out here, the contribution of the metric change in thickness for the analysis of static and linear behavior of laminated composite shells. To achieve this objective, we’ve applied N-T’s shells equations on the same monolayer laminate composite shell and derive the law of MBLS. The macrostructure is analyzed under static loads and implemented using low order curved shell finite elements with shifted Lagrange (CSFE-sh). We tested this element on benchmarks found within the literature. The analysis of cylindrical and spherical shells subjected to uniform sinusoidal pressures and asymmetric pressures reveals excellent accuracy compared to others. The results found without any correction factor were compared with those obtained by the analytical method and other finite element models.

5 April 2026
Verified
Journal Article
Closed access
ELElong Valery Lavenir
Elong Valery Lavenir
NJNkongho Anyi Joseph
Nkongho Anyi Joseph
MSMoussa Sali
Moussa Sali
ACAmba Jean Chills
Amba Jean Chills
Banana pseudostem bagasse (Musa spp.) is an abundant agricultural residue generated after harvesting or sap extraction. Its valorization contributes to reducing agricultural waste, replacing synthetic materials, and promoting the development of bio-based sectors in construction, packaging, and related industries. This study provides a comprehensive characterization of banana bagasse to support its use as a sustainable industrial material. The analysis focused on key physical, hydric, chemical, and thermal properties. The results showed a fineness of 40 µm, a density of 220 kg·m⁻³, a porosity of 77%, and a specific surface area of 1.2 m²·g⁻¹. Hydric properties included a moisture content of 74.5% (wet basis), a water retention capacity of 292.5%, and a water absorption of 122.5%. The chemical composition consisted of cellulose (41.6%), hemicellulose (28%), lignin (16%), pectin (5.7%), and ash content (3.7%), along with CHNO elemental composition. The calorific value was estimated at 3.7 MJ·kg⁻¹. All analyses were conducted according to standardized protocols (ISO, ASTM, AOAC, and NBN EN). These findings highlight the low density, high porosity, and balanced lignocellulosic composition of banana bagasse, making it a promising natural reinforcement for low-cost and sustainable applications. However, limitations such as moisture sensitivity, natural variability, and limited durability must be considered for effective implementation.