6 February 2019 in IEEE Transactions on Applied Superconductivity
Inductance is a very commonly used electrical parameter in transient progress analysis, as well as in energy storage evaluations. It was normally considered as constant when the geometrical configuration of a coil is determined. However, experiments on Bi-2223 (Bi 2 Sr 2 Ca 2 Cu 3 O 10+x ) and YBCO (YBa 2 Cu 4 O 7-x ) coils, both show 10% rise inductance while increasing the applied current. The inductance grows approximately a linear relationship from its minimum to maximum. We used both theoretical and experimental analysis to deeply understand the mechanism of the variation in terms of current distribution in high-temperature superconducting (HTS) coils. Taking this inductance change into account would benefit the accuracy in energy storage applications and in transient analysis occasions. Besides, inductance controllable devices could be achieved by manipulating the bias current applied on HTS coils.
16 May 2010 in Physica C: Superconductivity and its Applications
17 July 2018 in IEEE Transactions on Applied Superconductivity
As the improving of voltage grade for high temperature superconducting (HTS) power devices, the surface flashover phenomenon in liquid nitrogen becomes an important factor that make the HTS devices breakdown. So the study on surface flashover characteristics in liquid nitrogen becomes more important. This paper studied the polarity effect of standard lightning impulse surface flashover under extremely non-uniform electric field in liquid nitrogen by experiment. It is found that flashover voltages under positive impulses is generally higher than that under negative polarity, which is opposite to the results in gas gaps breakdown and on solid-SF6 gas and solid-transformer oil interface. By the analysis of flashover traces and electric field distribution between the triangle-plane electrodes, combining the related surface flashover theory in liquid nitrogen, it is assumed that surface flashover in liquid nitrogen is started from the electron emission from cathode triple-junction. Because of the non-uniformity of electric field distribution, the initial voltages of the electron emission from cathode triple-junction and the forces suffered on the head of flashover streamers are differed. It is the main reason that polarity effect in liquid nitrogen is formed. The results could provide reference for the dielectric design of HTS devices.
1 August 2009 in Cryogenics
7 April 2021 in IEEE Transactions on Applied Superconductivity
The surface discharge of solid dielectric in liquid nitrogen has became one of the key problems in the development of HTS power devices. It is necessary to study the mechanism of surface discharge of the solid dielectric in liquid nitrogen. This paper chose polytetrafluoroethylene(PTFE) and DW-3 epoxy resin as specimens, tested the surface discharge voltages of 2 kinds of specimens with different surface roughness under lightening impulse voltages in liquid nitrogen and discussed the effect mechanism. The experimental results showed that the surface discharge voltage and discharge time of both materials in liquid nitrogen increased as the surface roughness increasing under lightning impulses. The surface roughness affects the surface discharge voltage of the solid dielectric in liquid nitrogen under lightning impulse, mainly in the charge left on the grinding surfaces of solid dielectrics, the heights of projections, and the creepage distance on the dielectric surfaces. The main discharge process is in the gasification path, the effect of solid dielectric on surface discharge in liquid nitrogen is smaller. These reasons make the surface discharge in the liquid nitrogen less affected by the surface roughness. The results further explore the characteristics of surface discharge in liquid nitrogen and could provide methodological guidance to improve the surface discharge voltages in liquid nitrogen.