1 July 2019 in Food Hydrocolloids
21 June 2022 in ACS Applied Materials & Interfaces
27 April 2020 in ACS Applied Materials & Interfaces
Wood-based multifunctional materials with excellent mechanical performance are increasingly considered for sustainable advanced applications due to unique hierarchical structure and inherent reinforcing cellulose phase orientation. Nonetheless, a wider multipurpose utilization of wood materials is so far hampered due to constrains arising from scalable functionalization, efficient processing and facile shaping as well as natural heterogeneity and durability. This study introduces a multifunctional all-wood material fabrication method relying on delignification, ionic liquid treatment and pressure-assisted consolidation of wood. Structure-retaining controlled delignification of wood was performed to enable direct access to the hierarchical cellulose assembly while preserving the highly aligned and thus beneficial wood structural directionality. As a following step, obtained bio-based scaffold of an increased porosity was infiltrated with an ionic liquid and heat activated to partially dissolve and soften the cellulose fiber surface. Water-washed to remove IL samples exhibited pronounced isotropic flexibility, which upon combined compression and lateral shear allowed fabrication of various 3D shapes with adjustable fiber architecture. Obtained very compact and totally additive-free all-wood materials were extensively characterized revealing superior mechanical performance as well as gained multifunctionality compared to native wood.
1 September 2021 in ACS Sustainable Chemistry & Engineering
Phosphorylated cellulosic micro(nano)fibrillated materials are increasingly considered for flame-retardant applications as a biobased alternative to their halogen-based counterparts. Most of the reported cellulose functionalization strategies, however, are realized at low solids contents and/or involve energy-intensive fiber disintegration methods. In this perspective, we propose an alternative concept of phosphorylated microfibrillated cellulose production with notably high (25 wt %) solids content and low (0.6 MWh/t) energy consumption. Here, an enzyme-aided pulp disintegration upon mild mechanical treatment was combined with an effective mixing of the fibrillated material with (NH4)2HPO4 in the presence of urea. Subsequently, the obtained slurry was cured at elevated temperature to enable cellulose phosphorylation, which was redispersed afterward in water. The morphology of the obtained phosphorylated micro(nano)fibrillated cellulose materials was extensively characterized by optical microscopy, a fiber analyzer, SEM, and AFM. The presence of phosphate groups in the cellulose structure was validated by ATR-FTIR as well as 31P and 13C NMR spectroscopy. The casted films prepared from phosphorylated cellulose bearing a charge of 1540 μmol/g, which was the highest among the prepared samples, demonstrated noticeably improved flame retardancy, leaving ∼89% of the material after burning as well as self-extinguishing properties when the samples were subjected to a butane flame for 3 s.
29 January 2023 in Advanced Electronic Materials
Printed, flexible, and hybrid electronic technologies are advancing rapidly leading to remarkable developments in smart wearables, intelligent textiles, and health monitoring systems. Flexible electronics are typically fabricated on petroleum‐derived polymeric substrates. However, in the light of global environmental concerns regarding fossil raw materials, there is a need to drive the production of flexible electronics devices based on sustainable materials. Additionally, there is a need to reduce the quantity of electronic waste by developing material recovery and recycling technologies. Here, a fully biobased and biodegradable substrate tailored for printed flexible electronic applications is developed. Based on a nanocomposite of cellulose nanofibril (CNF) and hydroxyethyl cellulose (HEC), the substrate shows excellent mechanical and optical properties for printed flexible electronics applications. High‐resolution screen printing of conductive ink and typical electronics assembly processes are possible to realize on the substrate. An electrocardiograph (ECG) device is fabricated on the cellulosic substrate as a technology demonstrator and its performance is confirmed on human volunteers. Last, end‐of‐life scenarios are studied for printed electronic devices where device degradation and subsequent material recovery concepts are presented. This work demonstrates that sustainable plant‐derived materials can play a big role toward a green transition in the electronics industry.
8 January 2019 in ACS Sustainable Chemistry & Engineering
Synthetic structural materials of high mechanical performance are typically either of large weight (for example, steels and alloys) or involve complex manufacturing processes and thus have high cost or cause adverse environmental impact (for example, polymer-based and biomimetic composites). In this perspective, low-cost, abundant and nature-based materials, such as wood, represent particular interest provided they fulfil the requirements for advanced engineering structures and applications, especially when manufactured totally additive-free. Here, we report on a novel all-wood material concept based on delignification, partial surface dissolution using ionic liquid (IL) followed by densification resulting in a high-performance material. A delignification process using sodium chlorite in acetate buffer solution was applied to controllably delignify the entire bulk wooden material while retaining the highly beneficial structural directionality of wood. In a subsequent step, obtained delignified porous wood template was infiltrated with an IL 1-ethyl-3-methylimidazolium acetate, [EMIM]OAc and heat activated at 95 °C to partially dissolve the fiber surface. Afterwards, treated wood was washed with water to remove IL and hot-pressed to gain a very compact cellulosic material with fused fibers while retaining unidirectional fiber orientation. The obtained cellulose materials were structurally, chemically, and mechanically characterized revealing superior tensile properties compared to native wood. Furthermore, suggested approach allows almost 8-fold tensile strength improvement in the direction perpendicular to fiber orientation, which is otherwise very challenging to achieve.