8 January 2021 in IEEE Transactions on Antennas and Propagation
In this paper, a design method for the reflectionless absorber (RLA) is proposed based on the principle of the band-stop reflectionless filter (RLF). Compared to the traditional absorbing structures, the RLA can effectively absorb the EM waves within its operating band with small out-band reflection. Besides, the RLA has layer-independent characteristic due to its small reflection. Therefore, multi-band and wideband RLAs can be achieved by simply stacking several single-band RLAs. After theoretical analysis and discussion of the single-band RLA, multi-band and wideband RLAs are designed. Finally, two samples are fabricated to verify the presented design method. The theoretical calculated, simulated and measured results agree well.
11 February 2025 in IEEE Transactions on Antennas and Propagation
An improved half-fisheye lens (HFL) is proposed to achieve efficient mid-range radiative wireless power transfer (RWPT). Firstly, the study analyzes the factors that impede the attainment of optimal power transfer efficiency (PTE) in a mirror-symmetric RWPT system composed of a pair of conventional HFLs under practical feeding conditions. Subsequently, the field distribution conditions requisite for achieving optimal PTE in the HFL-based RWPT system are derived. Guided by these conditions, a mirror-symmetric RWPT system comprising a pair of improved HFLs is designed to achieve optimal PTE under practical feeding conditions. The improved HFL consists of a redesigned HFL and a transition layer. The transition layer not only mitigates the impedance mismatch at the interface but also achieves a time-reversal symmetric field distribution required for optimal PTE. The redesigned HFL undergoes axial compression and refractive index distribution modification, thereby reducing the lens’s refractive index while maintaining its profile height. Finally, to validate the effectiveness of the proposed design, a mid-range RWPT prototype based on the improved HFL is designed and fabricated. Experimental results show that the RWPT system based on the improved HFL can achieve a PTE of 41% at a transfer distance of d = 8λ when fed by a horn antenna, demonstrating a 70% PTE improvement compared to the RWPT system based on the conventional HFL.
1 September 2026 in IEEE Transactions on Microwave Theory and Techniques
27 July 2026 in Applied Physics Letters
We propose a transformation-optics-based method for generating a single-sided time-varying magnetic field. In this method, an inhomogeneous anisotropic medium exhibiting a spatially asymmetric response is constructed and effectively emulated by a distribution of current density, which can independently generate a single-sided time-varying magnetic field. Guided by this approach, we design a single-port-fed multilayer structure consisting of stacked variable-pitch planar spiral coils interconnected in series, eliminating the need for high-permeability materials or Halbach-array-based configurations. A six-layer prototype is fabricated and experimentally characterized at 1 MHz. The measured magnetic flux density on the working side closely matches simulations, while the field on the opposite side is suppressed to near zero, validating the feasibility of the proposed method and demonstrating its potential for active metamaterials with simplified architectures and low magnetic-field leakage, which do not rely on high-permeability magnetic materials.