Edward Guzik

Edward Guzik

Auto-generated profile, based on publicly available information

Edward Guzik

AGH University of Krakow, al. Adama Mickiewicza 30, 30-059 Kraków, Poland

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2023 in Archives of Metallurgy and Materials
Verified
Journal Article
Closed access
PDF file
EGEdward Guzik
Edward Guzik
DKDariusz Kopyciński
Dariusz Kopyciński
AZA. Ziółko
A. Ziółko
ASAndrzej Szczęsny
Andrzej Szczęsny
The technology of producing castings of high-quality inoculated cast iron with flake graphite particles in the structure is a combination of the melting and inoculation process. Maintaining the stability of the strength and microstructure parameters of this cast iron is the goal of a series of studies on the control of graphitization and austenitic inoculation (increasing the number of primary austenite dendrites), and which affects the type of metal matrix in the structure. The ability to graphitize the molten alloy decreases with its holding in the melting furnace more than an hour. The tendency to crystallize large dendritic austenite grains and segregation of elements such as Si, Ni and Cu reduce the ductility properties of this cast iron. The austenite inoculation process may introduce a larger number of primary austenite grains into the structure, affecting the even distribution of graphite and metal matrix precipitation in the structure. Known inoculation effects the interaction (in low mass) of additives: Sr, Ca, Ba, Ce, La, produces MC2 carbide). Addition of Fe in the inoculant influences the number and shape of austenite dendrites. Hybrid modification combines the effects of these two factors. The introduction of nucleation sites for the graphite eutectics and primary austenite grains result in the stabilization of the cast iron microstructure and an increase in mechanical properties. The obtained test results set the direction for further research in this area in relation to the production of heavy plate castings in vertical and horizontal pouring.

1 January 2010
Verified
Conference Paper
Closed access
PDF file
WWWaldemar S. Wołczyn´ski
Waldemar S. Wołczyn´ski
EGEdward Guzik
Edward Guzik
WWWojciech Wajda
Wojciech Wajda
BKBogusz Kania
Bogusz Kania
As the first step of simulation, a temperature field for solidifying cast steel and cast iron roll was created. The convection in the liquid is not comprised since in the first approximation, the convection does not influence the analysed occurrence of the C → E (columnar to equiaxed grains) transition in the roll. The obtained temperature field allows to study the dynamics of its behavior observed in the middle of the mould thickness. This midpoint of the mould thickness was treated as an operating point for the C → E transition. A full accumulation of the heat in the mould was postulated for the C → E transition. Thus, a plateau at the T(t) curve was observed at the midpoint. The range of the plateau existence tC ↔ tE corresponded to the incubation period, tC R ↔ tE R that appeared before fully equiaxed grains formation. At the second step of simulation, the thermal gradients field was studied. Three ranges were distinguished: a/ for the formation of the columnar structure (the C–zone): (Ṫ ≫ 0 and (G|t<tCR − G|t=tCR) ≫ 0), b/ for the C → E transition (from columnar to fully equiaxed structure): (Ṫ ≈ 0 and (G|t=tCR − G|t=tER) ≈ 0), c/ for the formation of the fully equiaxed structure (the E–zone): (Ṫ < 0 and (G|t=tER − G|t>tER) ≈ 0). The columnar structure formation was significantly slowed down during incubation period. It resulted from a competition between columnar growth and equiaxed growth expected at that period of time. The (G|t=tC R − G|t=tE R ) ≈ 0) relationship was postulated to correspond well with the critical thermal gradient, Gcrit. . A simulation was performed for the cast steel and cast iron rolls solidifying as if in industrial condition. Since the incubation divides the roll into two zones (columnar and equiaxed) some experiments dealing with solidification were made on semi-industrial scale. A macrosegregation equation for both mentioned zones was formulated. It was based on a recent equation for redistribution after back-diffusion. The role of the back-diffusion parameter was emphasized as a factor responsible for the redistribution in columnar structure and equiaxed structure.

1 December 2023 in Technical Transactions
Verified
Journal Article
Open access
PDF file
EGEdward Guzik
Edward Guzik
AŚAdrian Świątkowski
Adrian Świątkowski
ASAndrzej Szczęsny
Andrzej Szczęsny
DKDariusz Kopyciński
Dariusz Kopyciński
PMPiotr Mirek
Piotr Mirek
KSKrakodlew S.A
Krakodlew S.A
This article presents the first part of the research on the production of large-sizecastings, such as bottom plates and counterweights produced in the KrakodlewS.A. foundry. Castings of this type are not complicated in terms of construction butmust meet certain requirements, namely to be able to withstand the effects of hightemperature and associated stresses, or to have specific dimensions and weight inthe case of counterweights. In both cases, the most common method of formingcastings is horizontal moulding. However, this requires a lot of time for machiningthe finished castings. Forming heavy castings in a vertical orientation, although muchmore problematic, can mean that the amount of time required for machining may bereduced. The research presents the effect of overheating temperature on the effectsof inoculation with the Zircinoc inoculant, in which it was shown that increasing thetemperature by fifty degrees increased the amount of eutectic grains by around11–15%.

3 August 2022 in Archives of Foundry Engineering
Verified
Journal Article
Closed access
ASAndrzej Szczęsny
Andrzej Szczęsny
DKDariusz Kopyciński
Dariusz Kopyciński
EGEdward Guzik
Edward Guzik
The paper presents research carried out during the development of new technology for the production of heavy-weight castings of counterweights. The research concerns the procedure of inoculation gray cast iron with flake graphite and indicates guidelines for the development of new technology for obtaining inoculated cast iron for industrial conditions. The research was conducted in order to verify the possibility of producing large size or heavy-weight castings of plates in a vertical arrangement. The aim is to evenly distribute graphite in the structure of cast iron and thus reduce the volumetric fraction of type D graphite. The tests were carried out using the ProCast program, which was used to determine the reference chemical composition, and the inoculation procedure was carried out with the use of three different inoculants. The work was carried out in project no. RPMP.01.02.01-12-0055 / 18 under the Regional Operational Program of the Lesser Poland Voivodeship in Krakow (Poland).

4 June 2020 in Acta Metallurgica Slovaca
Verified
Journal Article
Open access
PDF file
ASAndrzej Szczęsny
Andrzej Szczęsny
DKDariusz Kopyciński
Dariusz Kopyciński
EGEdward Guzik
Edward Guzik
GSGrzegorz Soból
Grzegorz Soból
KPKrzysztof Piotrowski
Krzysztof Piotrowski
WPWładysław Paul
Władysław Paul
In industrial conditions, ductile iron was prepared and two molds were made, in which a 600mm thick plate was formed. Filling system for one mold was placed vertically and for the second -horizontally. In order to obtain cooling curves, "S" type thermocouples have been placed in the mold. After cooling the casts, the samples from the fixing points of thermocouples were cut by the trepanning method. In the "vertical" cast sample shrinkage porosity was observed, while in the "horizontal" cast sample no porosity was detected. A significant difference in the recorded temperature in the center of the casts was discovered, indicating a defect in "vertical" cast.

17 July 2023 in Archives of Foundry Engineering
Verified
Journal Article
Open access
JMJan Mędoń
Jan Mędoń
ASAndrzej Szczęsny
Andrzej Szczęsny
EZEugeniusz Ziółkowski
Eugeniusz Ziółkowski
EGEdward Guzik
Edward Guzik
MCM. Czarny
M. Czarny
DKDariusz Kopyciński
Dariusz Kopyciński