1 January 2002 in CIRP Annals
1 January 2011 in CIRP Annals
1 January 2013 in Physics Procedia
In order to investigate the effects of process parameters on the quality of laser cladding layer, Co-based alloy laser cladding experiments based on orthogonal method was performed on the 304 stainless steel by high power diode laser (HPDL). The results show that the laser scanning speed has the most significant influence on the width, height and depth of laser cladding layer, and the powder feeding rate has the most important influence on the hardness of laser cladding layer. For the sake of getting optimum process parameters and reducing the times of process experiments in practical engineering application, a back propagation (BP) neural network model was established to predict the optimum process parameters. The calculation and predication results show a good agreement with the experimental results. The research results have both significant reference value and guidance meaning in processing parameters of Co-based alloy cladding by a high power diode laser in the application
1 January 2013 in Procedia CIRP
In comparison with high-speed cutting and electrical discharge machining, laser milling is the most universal method for shaping of any type of materials (including natural and artificial diamonds, alloys etc.).The investigation of laser milling was done using Q-switched YAG laser. It was found that the highest productivity and quality of the processing of super-hard materials (when the material is removed layer-by-layer) could be achieved when laser milling is done without the formation of liquid phase or when its quality is minimal (artificial diamonds, borazon).The main reason for the low quality of milling of super-hard materials is uncontrollable surface roughness that is formed when liquid phase is expelled from the hole that is formed under the influence of laser beam. The height of micro-roughness of the processed surface is equal to the thickness of the removed layer. That is why at laser milling of super-hard materials, stainless steels and other similar materials it is recommended to use special techniques that are based on the constant shift of the focusing spot (from layer to layer) according to a specific algorithm
1 January 2007 in CIRP Annals
1 January 1990 in Optics and Lasers in Engineering