28 August 2020 in Potravinarstvo Slovak Journal of Food Sciences
Homogenization is a necessary process in the production of drinking milk and most dairy products. The specific energy consumption of the most common valve homogenizers reaches 8 kW h.t-1. A promising way to reduce it is the introduction of more effective counter-jet homogenizers. The purpose of these studies is to increase the efficiency of machines of this type through fuller use of their kinetic energy. To achieve this, the design of a ring reflector was developed and experimental studies were carried out to determine its influence on the efficiency of milk fat dispersion in a counter-jet homogenizer. Calculations were made to determine the reflector’s design parameters. An installation for experimental research has been developed, in which the required milk pressure is created with the help of compressed carbon dioxide. The dispersive indices of the milk emulsion were determined by computer analysis of milk sample micrographs obtained with an optical microscope and a digital camera using Microsoft Office Excel and Microsoft Visual Studio C# software using the OpenCV Sharp library. As a result of research, the formula for defining the angle of the reflector top has been determined analytically. Experimental studies proved its validity and allowed determination of the optimal diameter. A comparison of the dependence of the degree of homogenization on the excess pressure in a counter-jet homogenizer proves a 15 – 20% increase in the degree of dispersion when using a reflector. At the same time, specific energy consumption does not increase. Comparison of the distribution curves of milk fat globules by size after counter-jet homogenization and homogenization with a reflector suggests that the average diameter of fat globules for the experimental method decreases from 0.99 to 0.83 μm. This indicates the high quality of the dispersal characteristics of the milk emulsion after processing in a counter-jet homogenizer with a reflector.
27 December 2016 in Eastern-European Journal of Enterprise Technologies
In the modern dairy production schemes one of the main problems is high energy consumption in the process of homogenization. One of the perspective ways to solve this problem is to research and develop the variety of rotor-pulsation machine – pulsation machine with a vibrating rotor. Homogenization in such machine allows getting high values of emulsion flow acceleration and using the resonance phenomenon that has a positive impact on quality and energy consumption of the machine.As a result of analytical researches, the hypothesis is suggested about the key role of emulsion acceleration in the process of milk emulsion fat phase dispersing in the pulsation machine with a vibrating rotor. We received dependences that associate instantaneous and average acceleration of the emulsion with the frequencies of rotation and vibration of the rotor, its diameter and amount of openings. These dependences allow determining conditions for increasing degree of emulsion dispersing. The experimental researches resulted in defining interconnection between acceleration of emulsion and dispersion of fat phase of milk, which confirms the hypothesis about the mechanism of homogenization in the pulsation machine with a vibrating rotor. The middle sizes of fat globules of milk are found to be dependent on the frequency of rotation and amplitude of rotor vibration. With the frequencies of rotation of the crank shaft up to 2880 rpm and amplitude of rotor oscillation 1 mm it is possible to get milk emulsion with the average size of around 0.8 μm. The results of the research prove the use of such machines in the technological processing lines of milk to be promising. The investigated machine allows receiving highly dispersed emulsion that is on the same level as processed in valve homogenizers with considerable decrease in energy consumption.
30 October 2020 in Eastern-European Journal of Enterprise Technologies
One of the urgent problems in the dairy industry is to reduce power input in the process of dispersing milk fat while ensuring a high degree of homogenization. This problem can be solved through the development and implementation of a virtually unexplored jet-slot milk homogenizer. The principle of its action implies the preliminary separation of cream from whole milk and its feed into the high-velocity flow of skim milk. The homogenization process occurs by creating a sufficient difference in velocities of the disperse and dispersing phases of the milk emulsion, which is mathematically described by Weber's criterion.Experimental studies of the effect of fat content in cream, cream feed rate, and width of the annular slot on dispersion indices during processing in the designed homogenizer have been carried out. The mathematical dependence which relates these parameters was found. It was proved that to obtain a milk emulsion with a dispersion level of 0.8 μm, the width of the annular slot should be 0.1–0.5 mm, fat content in cream 40–50 %, and the feed rate less than 40 m/s. The results of the evaluation of dispersion quality show a 7 % decrease in the average diameter of the fat globules compared to the most common values obtainable in the valve homogenizer. A refined critical value of the Weber criterion for dispersion of the fat phase of milk was determined (29 units) which indicates an increase in the intensity of the homogenization process in comparison with the jet milk homogenizer with a separate cream feed. The derived critical value of the criterion is necessary to create a theory of the process of dispersing milk fat and develop more efficient designs of milk homogenizers
31 July 2017 in EUREKA: Life Sciences
The study of technological parameters of Midas wheat flour and possibility to use little-spread plants at wheat bread manufacturing was realized. Parameters and regimes for keeping and baking bread of new recipes were elaborated and selected. The elaborated method of bread manufacturing by new recipes relates to the field of agriculture and food industry and may be used at a laboratory baking of bread.There was experimentally grounded and introduced the change of a part of recipe quantity of wheat flour for dried and comminuted plants of Népeta mussinii L., Polymnia osotolysta L., Amaranthus tricolor L., Cosmos sulphureus L., Tanacetum parthenium L., Cyperus esculentus L., Physalis tomentous L. at baking bread. According to determined physical-chemical, organoleptic parameters of bread, a possibility of baking bread using plants was proved. The expedience of introducing vegetable additives of Népeta mussinii L., Polymnia osotolysta L., Amaranthus tricolor L., Tanacetum parthenium into wheat dough in the dose no more than 5 % to the flour mass; up to 10 % – Cosmos sulphureus L and up to 15 % – Cyperus esculentus L., Physalis tomentous L was proved. At these very dosages bread had an evenly colored crust, without breaks and cracks, elastic crumb, thin-walled porosity, expressed bread taste and pleasant smell of additives as opposite to other experimental samples.
31 July 2018 in EUREKA: Life Sciences
Rational nutrition for a whole year is possible with a well-established system of storage and processing of plant raw materials. Products with vegetable and fruit raw materials due to their availability and nutritional value are in demand among the population. There is a constant interest in new products with increased biological value. The preservation of ascorbic acid, the main source of which is vegetables and fruits, is also affected by the technology of production. Despite the damaging effect of the heat treatment temperature of canned products on thermolabile components, the sterilization regimes should be relaxed. To this end, it has been proposed to produce beverages from vegetables and fruits for scientifically-based recipes, which allows them to be processed at a temperature of 100 °C, as well as juices with pulp and sugar. Smoothie, made on the basis of zucchini with the addition of gooseberries and blackcurrant puree contain respectively 13.3 and 41.8 mg/100 g of ascorbic acid, have an optimal for good perception of the sugar-acid index 21,4-21,5 compared with juices from soft pulp and sugar from gooseberry and black currant, which produces industry. The latter is explained by the fact that instead of sugar syrup, natural juice from zucchini was used in the recipe.