Recently an extensive growth in the market for Unmanned Aerial Vehicles (UAVs, drones) has been observed. Because of numerous advantages, their application in various areas is wide, starting with military, through civilian – specialized up to amateur. The world market for civilian commercial...
23 December 2023 in Archive of Mechanical Engineering
This paper presents a numerical analysis of the thermal-flow characteristics for a laminar flow inside a rectangular microchannel. The flow of water through channels with thin obstacles mounted on opposite walls was analyzed. The studies were conducted with a low Reynolds number (from 20 to 200). Different heights of rectangular obstacles were analyzed to see if geometrical factors influence fluid flow and heat exchange in the microchannel. Despite of the fact that the use of thin obstacles in the microchannels leads to an increase in the pressure drop, the increase in the height of the obstacles favors a significant intensification of heat exchange with the maximum thermal gain factor of 1.9 for the obstacle height coefficient h/H=0.5, which could be acceptable for practical application.
1 June 2026 in Advances in Science and Technology Research Journal
The aim of this article was to design an optimal cross-section of the front wing for a Formula Student vehicle, conducted in compliance with applicable technical and aerodynamic regulations. The article focuses on analyzing various configurations of four-element wings supported by Computational...
20 October 2023 in Advances in Science and Technology Research Journal
The aim of this study was to investigate the effects of mini Trailing-Edge Devices (mini TEDs) on the aerodynamic characteristics of the RAE 2822 airfoil. Using ANSYS Fluent software, numerical simulations were conducted to analyze the compressible flow around the airfoil at Mach number (Ma)...