This research aimed to synthesize magnesium silicate (MgSiO3) used as a support for Ni-Fe cocatalysts in the depolymerization of kraft lignin. Magnesium silicate was prepared by a hydrothermal method, followed by metal solution impregnation to obtain lignin depolymerization catalysts. The catalytic efficiency of kraft lignin depolymerization to valued phenolic compounds was studied by varying the ratios of Ni and Fe on the MgSiO3 support. Moreover, other factors such as temperature, reaction time, and catalyst recycling affected both the quality and quantity of the products studied. The results illustrated that the catalyst 10Ni10Fe/MS produced all lignin depolymerization products with the highest yield (14.29 wt %) using reaction conditions of 300 degrees C and 1 h. In addition, the main products were found to be catechol (11.38 wt %), guaiacol (1.51 wt %), and phenol (0.79 wt %). More importantly, the 10Ni10Fe/MS catalyst showed good reusability even after two recycling processes, and the obtained phenol and guaiacol were found to be 0.63 and 1.01 wt %, respectively.
7 March 2024 in Polymers for Advanced Technologies
This study presents the fabrication and synergistic properties of electrospun chitosan/poly(trimethylene carbonate) (CS/PTMC) blend nanofibers. Optimized morphologies were achieved at concentrations of 8% (w/v) CS and 10% (w/v) functionalized PTMC. A neutralization method using ammonium hydroxide was established, which effectively removed residual salts within 5 minutes while preserving nanofiber morphology. The analyses of thermal properties and X-ray diffraction revealed that the incorporated PTMC enhanced the thermal stability and tended to loosen the semi-crystalline packing of the CS matrix. Mechanical testing demonstrated a maximum tensile strength of 3.50 ± 0.42 MPa and an elongation at break of 9.95 ± 1.26% at a 30% PTMC blending ratio. Furthermore, blending with PTMC enhanced nanofiber hydrophobicity and enzymatic stability, with the weight loss significantly reduced to 5% after two weeks. These results indicate that the CS/PTMC system offers tunable mechanical and degradation profiles, making it a promising candidate for high surface development and alternative composite CS materials.