The modulus of elasticity is a property of concrete, which is known for its high variability of values. A high enough value of the modulus of elasticity is a critical requirement in complicated concrete structures and in order to attain it, a number of factors must be taken into account, as it is subject to many. Curing is one of the most important influences. It can be described as an effort to maintain the temperature of concrete within the correct limits, prevent loss of water and the shrinkage connected with this. This paper describes an experiment focused on the observation of the development of the dynamic and static modulus of elasticity in dependence on the method of curing. The experiment worked with air-entrained as well as non-air-entrained concrete of the C 30/37 strength class. The results show that the curing method strongly affects not only the development, but also the final values of the concrete modulus of elasticity
1 July 2019 in IOP Conference Series: Materials Science and Engineering
The paper describes the determination of freeze-thaw resistance in self-compacting concretes and compares several test methods used for this purpose. The basic principle of testing freeze-thaw resistance is the observation of changes, in this case the loss of certain properties, in concrete attacked by freeze-thaw cycles. This paper documents measurements of tensile strength, tensile splitting strength, and dynamic Young’s modulus measured by the ultrasonic pulse velocity test and resonance method. The outcome of the experiment is an evaluation of how suitable each test is for determining the freeze-thaw resistance of self-compacting concrete.
The paper discusses the results of an experiment that focused on measuring Young's modulus in compression using several different specimens. They were made from lightweight concrete with porous aggregate and differed in shape (cylinder × prism), type (casting × core drilling), and size. Each type category counted a minimum of 6 specimens. The determination of Young's modulus was supplemented by a measurement of the dynamic modulus of elasticity determined by the ultrasonic pulse velocity test. The experiment was concluded by a statistical analysis of the measured values, which focused on the influence of each specimen variety on the value of the elastic modulus.
1 June 2019 in IOP Conference Series: Materials Science and Engineering
At present, emphasis is placed on the safety and durability of building structures due to the effects of external loads. Among the various external influences of the load, we can also include loads caused by the blast wave. Structures subjected to extreme loads such as explosion are structurally disrupted in a manner different from that of static or dynamic external loads. In construction practice, we are sometimes faced with the question of how to evaluate the state of a structure after an explosion. The article is focused on the possibility of evaluating the masonry wall affected by the explosion in terms of the expression of residual bearing capacity based on the laboratory tests and inspection in-situ.