17 March 2025 in Journal of Applied Physics
The room-temperature growth, characterization, and electrical transport properties of magnetron sputtered superconducting Ti40V60 alloy thin films are presented. The films exhibit low surface roughness and tunable transport properties. As the sputtering current increases, the superconducting transition moves toward higher temperatures. Rietveld refinement of the two-dimensional XRD pattern reveals the presence of stress in the films, which shifts from tensile to compressive as the sputtering current increases. Additionally, the crystallite size of the films increases with higher sputtering currents. The films exhibit a strong preferential orientation, contributing to their texturing. The crystallite size and texturing are found to be correlated with the superconducting transition temperature (TC) of the films. As the crystallite size and texturing increase, the TC of the films also rises.
1 February 2026 in Superconductor Science and Technology
The growth and characterization of superconducting thin films is essential for fundamental understanding and also for the use of these films in technological applications. In the present study, Ti 40 V 60 alloy thin films have been deposited using DC magnetron co-sputtering of Ti and V at ambient temperatures. The effect of deposition pressure on the film morphology, superconducting and normal state properties has been studied. Measurement of electrical resistance as a function of temperature indicates that up to a certain deposition pressure, the 20 nm thick Ti 40 V 60 films exhibit metallic behavior in the normal state and superconductivity at low temperatures. Beyond a threshold pressure, the films show a negative temperature coefficient of resistance with a residual resistance ratio less than one. Electrical transport measurements in the presence of magnetic field were performed to find the current–voltage ( I–V ) characteristics of the thin films. Analysis of the I–V curves indicates that the Ti 40 V 60 alloy thin films have a high transport critical current density ( J C ) e.g. in zero magnetic field and in 4 T (both at 4 K). Analysis of the field dependence of flux line pinning force density indicates a combined effect of core surface and core point pinning mechanisms (where k is the Ginzburg–Landau parameter). Additionally, spatial variations in the superconducting critical temperature across the sample contribute to δ pinning. In higher magnetic fields, a contribution from δl pinning (where l is the electron mean free path) also becomes significant. The findings indicate the potential of Ti 40 V 60 alloy thin film for superconducting device applications like cryogenic radiation detectors.
13 April 2026 in Journal of Physics and Chemistry of Solids
2 October 2025 in Physica Status Solidi (b)
22 April 2026 in IEEE Transactions on Applied Superconductivity
Superconducting radiation detectors typically exhibit detection and single-photon sensitivity limited to the mid-infrared wavelength range. Extending their detection capabilities into the far-infrared range (>10 μm) requires careful selection of substrate materials and detector geometries. The overall detection efficiency of such detectors is inherently linked to their absorption and coupling efficiencies. In this study, the resonator geometry and its absorption efficiency were estimated using electromagnetic simulations in CST Microwave Studio simulation software for a lumped-element meander structure. Simulations were performed over the 12–50 μm wavelength range, which corresponds to the Infrared Free-Electron Laser (IR-FEL) at RRCAT, Indore. The absorption in the meander inductor was significantly influenced by the substrate material and thickness, as well as the impedance matching between the detector structure and the incident photon medium. The results indicate that SiO2 and diamond substrates are well-suited for developing lumped element kinetic inductance detectors (LEKID) in the above wavelength range. Optimised meander geometries on diamond substrates demonstrated absorption efficiencies of up to 95% for narrow bandwidths and greater than 50% for wide bandwidths. Based on the simulations, a 30-pixel LEKID structure was fabricated by electron-beam lithography on a 500 μm SiO2-coated Si substrate. The resonator was made from a 20 nm-thick Ti40V60 alloy thin film. Optical characterization was also performed through simultaneous transmission and reflection measurements of the 30-pixel LEKID. Simulation studies demonstrate that the designed LEKID structure is well-suited for detecting far-infrared wavelengths above 10 μm, offering high absorption efficiency.
23 September 2026 in Journal of Applied Physics
Fast, highly sensitive, and broadband detectors operating in the mid-to-far-infrared (MIR–FIR) spectral region are essential for applications ranging from astrophysics to time-resolved spectroscopy using laboratory-based sources and beamlines at Infrared Free-Electron Laser (IR-FEL) facilities. Conventional Lumped Element Kinetic Inductance Detectors (LEKIDs) achieve high optical efficiency using resonant quarter-wavelength (λ/4) backshort cavities. However, this cavity-based approach is inherently narrowband and becomes optomechanically challenging at the mid-to-far-infrared (MIR–FIR) wavelengths. Here, we present a completely backshort free LEKID absorber architecture that achieves broadband absorption exceeding 50%. The meander absorbers were fabricated out of superconducting Ti–V alloys and characterized using the IR radiation from the IR-FEL at the Raja Ramanna Centre for Advanced Technology (RRCAT), India. By illuminating through the silicon substrate and matching the sheet resistance of the meander to the wave impedance of the silicon substrate, front-side reflection is strongly suppressed. Simultaneously, the sub-wavelength periodicity of the dense meander inhibits propagating transmission into free space via evanescent-wave confinement. This combined mechanism drives efficient Ohmic dissipation within the metallic meander, yielding an experimental absorption efficiency ranging from 50% to 90% across the 12.5–30 μm wavelength range. The cavity-free design greatly simplifies the focal plane array fabrication while providing the broadband response required for the next-generation detectors. To assess the suitability of the Ti40V60 alloy as an active superconducting detector material, a test LEKID resonator was also designed, fabricated, and experimentally characterized. An RF resonance at a frequency close to the simulated response was observed at temperatures below superconducting transition, thereby confirming the suitability of Ti–V alloys for LEKID development.