1 November 2022 in Russian Journal of Applied Chemistry
The possibility of the rhenium recovery by sorption onto a fluoroplastic-containing composite from the mother (process) liquor after precipitation of the cobalt–nickel concentrate obtained by complex processing of nickel-based rhenium-containing superalloy waste was examined in batch experiments. The isotherms of the rhenium sorption from a model solution and the mother liquor were obtained by the variable-volume method. The Henry constant in rhenium sorption from the mother liquor was 2100 ± 600 mL g–1. The rhenium sorption kinetics was studied in batch experiments. Mathematical processing of the data of the integral kinetic curves using the kinetic and diffusion models showed that the highest coefficient of determination (R2 = 0.999) was observed when using the pseudo-second-order model formally confirming certain contribution of the chemical reaction to the process. The rate constants calculated using the pseudo-second-order model were (1.7–2.8) × 10–3 g mg–1 min–1. Analysis by the external and internal diffusion models showed that the rhenium sorption onto the fluoroplastic-containing carbon composite occurred by the mixed-diffusion mechanism, with the contribution of the internal diffusion increasing with an increase in the concentration of ReO4– ions on the composite pore surface. The sorption properties of the carbon composite were stable in three cycles of rhenium sorption–desorption from the mother (process) liquor.
20 October 2023 in Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy)
The study investigated the feasibility of oxidative leaching rhenium in the presence of hydrochloric acid from machining waste (grinding waste) derived from products made of ZhS-32VI, a nickel-based heat-resistant alloy containing rhenium. This was achieved through agitation leaching process. The grinding waste fraction size of –0.071 mm, which accounted for the highest yield (49.2 wt.%), was utilized in the experiments. The rhenium leaching process was conducted in two variations: in the first option, grinding waste was mixed with a hydrochloric acid solution at ~100 °C, followed by the addition of hydrogen peroxide to the leaching solution after it had cooled; in the second option, leaching was performed using a hydrochloric acid solution with the gradual addition of hydrogen peroxide solution. The highest degree of rhenium leaching (91.0 %) was achieved in the first option. In this case, the initial concentration of hydrochloric acid was 8 M, and the molar ratio of the added reagents was ν(HCl): ν(H2O2) = 2.7 : 1.0. The kinetics of nickel leaching using a 6 M hydrochloric acid solution at 70 °C, with a solid-to-liquid phase ratio of 1 g : 50 ml, was also examined. The analysis of the kinetic data, processed using the “contracting sphere,” Ginstling–Brounshtein, and Kazeev–Erofeev models, indicates that the nickel leaching process occurs within the kinetic region. Additionally, the kinetics of rhenium leaching from the solid residue obtained after the hydrochloric acid leaching of nickel from grinding waste was investigated. Employing the same kinetic models to analyze the data, it was determined that the limiting stage of this process involves the diffusion of hydrogen peroxide within the rhenium-containing solid residue.
1 January 2023 in Image Journal of Advanced Materials and Technologies
The possibility of cobalt sorption of by anion exchangers from hydrochloric acid solutions in the presence of nickel was evaluated in the paper. The highest value of sorption capacity was observed in the gel anion exchange resin with pyridinium functional groups (Axionit VPA G.2.4) and the macroporous anion exchange resin with functional groups of secondary and tertiary amine (Indion 850). Processing of cobalt sorption isotherms with Indion 850 and Lewatit MP 800 anion exchangers was carried out using the Langmuir equation with constant values of (7⋅10–2 ± 0.03) and (0.2 ± 0.02) L⋅mg–1, the values of the maximum sorption capacity were (109 ± 5) and (74 ± 3) mg⋅g–1, respectively. The value of the Freundlich constant during the treatment of the sorption isotherm of cobalt with anionite Axionit VPA G.2.4 was (9.6 ± 0.3) mg⋅g–1. The kinetics of cobalt sorption by Axionit VPA G.2.4 and Indion 850 anionites was studied; the kinetic data of cobalt sorption with the highest value of the coefficient of determination R2 are described using the pseudo-second order equation. Using mathematical processing of the kinetic data of cobalt sorption according to the Weber-Morris equation, the intradiffusion nature of sorption was determined. The analysis of the results of the influence of elements accompanying the complex processing of waste rhenium-containing superalloys – iron, aluminum and chromium – suggests that iron and chromium have a competitive effect on the sorption of cobalt due to the possibility of the formation of their anionic forms in hydrochloric acid solutions for processing secondary rhenium-containing raw materials.
25 June 2024 in Theoretical and Applied Ecology
MRMendeleev University of Chemical Technology of Russia
Mendeleev University of Chemical Technology of Russia
SASouth Kazakhstan University named after. M. Auezova
South Kazakhstan University named after. M. Auezova
PUPeoples’ Friendship University of Russia (RUDN University)
Peoples’ Friendship University of Russia (RUDN University)
+4
Aquatic biological resources are an important part of the ecosystems of our planet, since they are involved in economic turnover as a source of food. The composition of water, including waste water from enterprises, has a direct impact on the state of aquatic biological resources. To extract and concentrate metals from solutions, hydrometallurgical processes are used – extraction and sorption. Their implementation is possible with the use of special substances – extractants and in a number of processes – sorption materials (Solvent Impregnated Resins (SIR’s) and Levextrel’s) with a mobile phase of the extractant, combining the properties of sorbents and extractants. Despite the advantages of the latter, such as high kinetic parameters, lack of swelling and high values of mechanical strength, they are characterized by the disadvantages of extraction methods – the entrainment of the extractant into the aqueous phase in dissolved and emulsion forms. Under static conditions, the possibility of purification of aqueous solutions containing primary or tertiary amine by adsorption on carbon materials (activated carbon NWC, carbon NWC-T modified with carbon nanotubes, CS-PTFE modified with polytetrafluoroethylene), as well as on styrene-divinylbenzene nonionic copolymer Porolas-T and a natural shell rock adsorbent was studied. The kinetics of adsorption of аmines Primene-JMT and TOA from aqueous solutions by these adsorbents has been studied by the method of a limited volume of solution. Of the known pseudo-first order, pseudo-second order and Elovich models, the pseudo-second order model describes kinetic data more adequately (R2>0.99). The values of the distribution coefficients and the rate constants of adsorption of Primene-JMT and TOA are determined. A block diagram of adsorption purification of aqueous solutions from amines is proposed, the implementation of which will reduce the toxicity of waste solutions and return some of the expensive extractant to circulation.