Small olefins from syngas: The conversion of coal or natural gas to liquid fuels or chemicals often proceeds through the production of CO and H 2 . This mixture, known as syngas, is then converted to hydrocarbons with Fischer-Tropsch catalysts. For the light olefins (ethylene to butylenes) needed for chemical and polymer synthesis, conventional catalysts are mechanistically limited to <60% conversion and deactivate through carbon buildup. Jiao et al. developed a bifunctional catalyst that achieves higher conversions and avoids deactivation (see the Perspective by de Jong). A zinc-chromium oxide creates ketene intermediates that are then coupled over a zeolite. Science , this issue p. 1065 , see also p. 1030
The products obtained from the low-temperature oxidation of n-butane in a jet-stirred reactor (JSR) have been analysed using two methods: gas chromatography analysis of the outlet gas and reflectron time-of-flight mass spectrometry. The mass spectrometer was combined with tunable synchrotron vacuum ultraviolet photoionization and coupled with a JSRvia a molecular-beam sampling system. Experiments were performed under quasi-atmospheric pressure, for temperatures between 550 and 800 K, at a mean residence time of 6 s and with a stoichiometric n-butane/oxygen/argon mixture (composition = 4/26/70 in mol%). 36 reaction products have been quantified, including in addition to the usual oxidation products, acetic acid, hydrogen peroxide, C1, C2 and C4 alkylhydroperoxides and C4 ketohydroperoxides. Evidence of the possible formation of products (dihydrofuranes, furanones) derived from cyclic ethers has also been found. The performance of a detailed kinetic model of the literature has been assessed with the simulation of the formation of this extended range of species. These simulations have also allowed the analysis of possible pathways for the formation of some obtained products.
14 January 2020 in Angewandte Chemie International Edition