The purpose of this work is to improve the operational characteristics of actuators based on ionic polymer-metal composites (IPMC) by improving their manufacture technology. The optimal thickness of the ion-exchange membrane was determined. The technology of metal electrode deposition, the composition of actuator electrolyte solution and the storage method of actuators were optimized.
The actual problem of microrobotic is creating of low cost energy-efficient actuator for mobile microsystems, which are able to simulate the movement of biological objects. In this article, designed and fabricated experimental samples of ionic polymer-metal composite (IPMC) actuators are presented. Highresolution SEM was used to control the electrode thickness and structure. Method of focused ion beam was used to study the structure of IPMC. Precision sample sections were obtained using focused ion beam. Platinum electrodes consist of two distinct layers of the platinum particles differing in morphology. The distribution of the platinum particles in the depth of the membrane was investigated by X-ray microanalysis. Atomic force microscopy was used for the characterization of surface morphology of IPMC.
We present a novel model for semiquantitative estimation of optimal concentrations of silver modifier necessary to increase the conductivity of graphene electrodes in actuators with electroactive...
The electro-mechanical model of ionic polymer-metal composite (IPMC) is presented in this paper. Applied electric field moves mobile ions inside the polymeric membrane. As a result, the electroosmotic flow inside the material appears and the subsequent motion of actuator occurs. These physical effects are modelled with the help of the finite element analysis software.
29 January 2018 in Nano- i Mikrosistemnaya Tehnika
Ionic polymer-polymer composites (IP2C) represent a new class of organic electroactive polymers those can be used to create electromechanical transducers (actuators and sensors). In fact, they represent “development” of ionic polymer-metal composites (IPMC) where metal electrodes are replaced by electrodes with organic conductive polymers based on PEDOT:PSS. It is established that IP2C sensors are characterized by a linear response to mechanical excitation in the range of bending deformations of 0.1…1 cm. Under the influence of frequencies of 0.1…20 Hz the amplitude of the output signal is practically unchanged. The sensitivity of IP2C sensors soaked with ethylene glycol was higher than the sensitivity of IPMC sensors. As the actuators studied, IP2C transducers showed a long response time, which involves using ethylene glycol and ionic liquid as solvents.