4 June 2013 in Energy & Environmental Science
The increasing global appetite for energy within the transportation sector will inevitably result in the combustion of more fossil fuel. A renewable-derived approach to carbon-neutral synthetic fuels is therefore needed to offset the negative impacts of this trend, which include climate change. In this communication we report the use of nonstoichiometric perovskite oxides in two-step, solar-thermochemical water or carbon dioxide splitting cycles. We find that LaAlO3 doped with Mn and Sr will efficiently split both gases. Moreover the H2 yields are 9× greater, and the CO yields 6× greater, than those produced by the current state-of-the-art material, ceria, when reduced at 1350 °C and re-oxidized at 1000 °C. The temperature at which O2 begins to evolve from the perovskite is fully 300 °C below that of ceria. The materials are also very robust, maintaining their redox activity over at least 80 CO2 splitting cycles. This discovery has profound implications for the development of concentrated solar fuel technologies.
5 February 2013 in Energy & Environmental Science
Accurate knowledge of water splitting kinetics is essential for the design and optimization of high-temperature thermochemical cycles for solar-driven fuel production, but such crucial data are unavailable for virtually all redox materials of potential practical value. We describe an investigation of the redox activity and oxidation kinetics of cobalt ferrite, a promising material for this application that is representative of a broader class of metal-substituted ferrites. To enable repetitive cycling, ferrites must be supported on another oxide to avoid sintering and deactivation. Consequently, we synthesized a composite material using atomic layer deposition of cobalt and iron oxides on zirconia, a commonly used ferrite “support”, to create a well-controlled, uniformly distributed composition. Our results show that the support is not an innocent bystander and that dissolved iron within it reacts by a different mechanism than embedded iron oxide particles in the matrix. Samples were thermally reduced at 1450 °C under helium and oxidized with steam at realistic process temperatures ranging from 900 °C to 1400 °C. Experiments within a fluid-dynamically well-behaved stagnation-flow reactor, coupled with detailed numerical modelling of the transient H2 production rates, allow us to effectively deconvolve experimental artefacts from intrinsic material behaviour over the entire time domain of the oxidation reaction. We find that second-order reaction and diffusion-limited mechanisms occur simultaneously at different oxidation rates and involve iron in two separate phases: (1) reduced Fe dissolved in the ZrO2 support and (2) iron oxide located at the interface between embedded ferrite particles and the zirconia matrix. Surprisingly, we also identified a catalytic mechanism occurring at the highest temperatures by which steady-state production of H2 and O2 occurs. The results reported here, which include Arrhenius rate constants for both oxidation mechanisms, will enable high-fidelity computational simulation of this complex, but promising approach to renewable fuel production.
3 August 2012 in Energy & Environmental Science
Projected growth in global population and continued industrialization of developing countries will increase total world energy consumption by 50% between 2008 and 2035 (U.S. Energy Information Administration (EIA), International Energy Outlook, DOE/EIA-0484(2011) (Washington, DC, September 2011)). This demand for energy will be largely met by burning more fossil fuels, thereby increasing anthropogenic carbon in the atmosphere and further fuelling geopolitical conflicts over control of dwindling energy resources. Recycling CO2 by splitting it in a solar-based thermochemical process is an attractive solution to both of these 21st century problems. In this communication, we examine a novel chemistry for a two-step, non-volatile metal oxide CO2 splitting cycle that shuttles iron oxidation states (Fe2+/3+) between CoFe2O4 and FeAl2O4 spinel compounds within a nano-engineered material. This chemistry is dramatically different than current metal oxide cycles that exploit oxygen non-stoichiometry in ceria or solid solution behaviour in ferrites. The engineered material was prepared using atomic layer deposition and maintained structural integrity over 6 heating cycles under conditions that mimic a concentrated solar power application, namely an oxidation temperature of 1000 °C, reduction at 1460 °C, and a heating rate of 16 °C s−1 from low to high temperature. Oxygen uptake and release behaviour was similar to that of ceria. Raman spectroscopy was used to verify cycle chemistry.
10 August 2023 in Nature Computational Science
28 July 2014 in The Journal of Physical Chemistry C
1 December 2021 in The Electrochemical Society Interface
Clean hydrogen is a carbon-free energy carrier that can be produced from water and sustainable energy sources such as wind, solar, and nuclear. Hence, clean hydrogen is one of the best ways to not only decarbonize the energy supply system, but also address the zero-emission challenges specific to large-carbon emitting industries that are difficult to separate from fossil fuels. To help achieve the Biden Administration’s goal of a 100% clean energy economy and net-zero emissions by 2050, several tens of millions of metric tons of clean, low-cost hydrogen will be needed annually. The HydroGEN Advanced Water Splitting Materials (AWSM) Consortium was established in 2016 as part of the Energy Materials Network (EMN) under the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office to enhance the performance, improve the durability, and reduce the cost of clean hydrogen production technologies, and it is helping to advance the H2@Scale vision.