Rogério Miranda Morais

Rogério Miranda Morais

Auto-generated profile, based on publicly available information

Rogério Miranda Morais

University of Glasgow

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2018 in IEEE Sensors Journal
Verified
Journal Article
Closed access
RMRogerio M. Morais
Rogerio M. Morais
MKMaykel dos Santos Klem
Maykel dos Santos Klem
GNGabriel Leonardo Nogueira
Gabriel Leonardo Nogueira
TGTiago Carneiro Gomes
Tiago Carneiro Gomes
NANeri Alves
Neri Alves
The production of low cost sensors to monitor environment in some industrial sectors is a current need. In aviculture centers, for example, the concentration of ammonia gas is related to humidity, and it is necessary to control it to avoid contaminations. With this need in mind, this study presents the preparation and characterization of a low cost humidity sensor based on poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) and polyaniline (PANI) fully printed onto paper by a commercial HP printer. Using electrochemical impedance spectroscopy (EIS), an equivalent circuit containing resistive and capacitive parameters was proposed. The resistive parameter R1 is related to values of ambient humidity. The R1 values showed a sensitive response of 200% when relative humidity changes 80%, taking 10 minutes to reach saturation point. Moreover, the device showed good stability when humidity remained constant. These results indicate that the proposed device is suitable for applying as a humidity sensor that costs less than one euro cent.


29 October 2021 in Semiconductor Science and Technology
Verified
Journal Article
Closed access
RMRogério Morais
Rogério Morais
DVDouglas Henrique Vieira
Douglas Henrique Vieira
CGCristina Gaspar
Cristina Gaspar
Luís PereiraLuís Pereira
Luís Pereira
Rodrigo MartinsRodrigo Martins
Rodrigo Martins
EAE Neri Alves
E Neri Alves
Paper electronics has emerged as an ecofriendly, light, low-cost, and recyclable material for the fabrication of flexible and printed transistors. In this study, we present fully printed organic electrochemical transistors using an active layer of PEDOT:PSS, carbon electrodes, cellulose-based electrolyte, and three different papers as substrates: bond, vegetal, and Lumi Silk, relating the electrical properties to the different morphologies of the paper surfaces. Each paper presents different regularity, diffusion capabilities, and roughness, with significant influence on the transistor performance. The more organized and smooth the surface, the better the electrical characteristics, the best of these being the Lumi Silk, with higher I on / I off ratio of 46, on-current of 8.3 × 10 −5 A, V on of 1.3 V, and power gain of 43.5 dB associated with ultra-low hysteresis of 0.1 V, high transconductance of −57.3 μ S, and suitablity for flexible electronics and sensors applications.

1 February 2018 in Current Applied Physics
Verified
Journal Article
Closed access
RMRogério M. Morais
Rogério M. Morais
MKMaykel S. Klem
Maykel S. Klem
MOMaíza S. Ozório
Maíza S. Ozório
TGTiago C. Gomes
Tiago C. Gomes
NANeri Alves
Neri Alves

1 June 2016 in Thin Solid Films
Verified
Journal Article
Closed access
MOMaíza S. Ozório
Maíza S. Ozório
GNGabriel Leonardo Nogueira
Gabriel Leonardo Nogueira
RMRogério Miranda Morais
Rogério Miranda Morais
CMCibely da Silva Martin
Cibely da Silva Martin
CCCarlos José Leopoldo Constantino
Carlos José Leopoldo Constantino
NANeri Alves
Neri Alves

21 January 2022 in Semiconductor Science and Technology
Verified
Journal Article
Closed access
RMRogério Morais
Rogério Morais
DVDouglas Henrique Vieira
Douglas Henrique Vieira
MKMaykel dos Santos Klem
Maykel dos Santos Klem
CGCristina Gaspar
Cristina Gaspar
Luís PereiraLuís Pereira
Luís Pereira
NANeri Alves
Neri Alves
Printed electronics is a reputable research area that aims at simple alternatives of manufacturing low-cost, eco-friendly, and biodegradable electronic devices. Among these devices, electrolyte-gated transistors (EGTs) stand out due to their simple manufacturing process and architecture. Here we report the study of printed EGTs with in-plane gate transistor (IPGT) architecture based on zinc oxide nanoparticles. The drain, source, and gate electrodes with two different W/L channel ratios were fabricated using a screen-printed carbon-based ink. We also produced a conventional top-gate transistor as a standard device, using the same structure of the IPGT described above with the addition of an indium tin oxide strip positioned over the electrolyte as the top-gate electrode. The IPGT with W/L = 5 presented a high mobility of 7.95 ± 0.55 cm2 V−1 s−1, while the W/L = 2.5 device exhibited a mobility of 3.03 ± 0.52 cm2 V−1 s−1. We found that the measured field-effect mobility of the device can be affected by the high contact resistance from the carbon electrodes. This effect could be observed when the device’s geometric parameters were changed. Furthermore, we also found that the IPGT with W/L = 5 exhibited higher values for mobility and transconductance than the top-gate transistor, showing that the IPGTs architecture is a good approach for cheap and printed transistors with performance comparable to standard top-gate EGTs.