Omar Es-Sahli

Omar Es-Sahli

Auto-generated profile, based on publicly available information

Omar Es-Sahli

Department of Aerospace Engineering, Mississippi State University, 75 B. S. Hood Rd, Starkville, MS 39762, USA

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2020 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
OEOmar Es-Sahli
Omar Es-Sahli
Adrian SescuAdrian Sescu
Adrian Sescu
Mohammed AfsarMohammed Afsar
Mohammed Afsar
OBOliver R. H. Buxton
Oliver R. H. Buxton
We investigate flows interacting with square and fractal shape multi-scale structures in the compressible regime for Mach numbers under subsonic and supersonic upstream conditions using large-eddy simulations. We also aim at identifying similarities and differences that these interactions have with the corresponding interactions in the canonical incompressible flow problem. To account for the geometrical complexity associated with the fractal structures, we apply an immersed boundary method to model the no-slip boundary condition at the solid surfaces, with adequate mesh resolution in the vicinity of the small fractal features. We validate the numerical results through extensive comparisons with experimental wind tunnel measurements at a low Mach number. Similar to the incompressible flow case results, we find a breakup of the flow structures by the fractal plate and an increase in turbulent mixing in the downstream direction. As the Mach number increases, we observe noticeable wake meandering and higher spread rate of the wake in the lateral direction perpendicular to the streamwise–spanwise plane. Although not significant, we quantify the difference between the square and the fractal plates using two-point velocity correlations across the Mach number range. The wakes generated by the fractal plate in the compressible regime showed lower turbulent kinetic energy and energy spectra levels compared to those of the square case. Moreover, results in terms of the near-field pressure spectra seem to indicate that the fractal plate has the potential to reduce the aerodynamic noise.

3 July 2021 in Theoretical and Computational Fluid Dynamics
Verified
Journal Article
Closed access
PDF file
OEOmar Es-Sahli
Omar Es-Sahli
Adrian SescuAdrian Sescu
Adrian Sescu
MAMohammed Afsar
Mohammed Afsar
YHYuji Hattori
Yuji Hattori

1 January 2023 in AIAA Journal
Verified
Journal Article
Closed access
OEOmar Es-Sahli
Omar Es-Sahli
ASAdrian Sescu
Adrian Sescu
MKM. Zamir A. Koshuriyan
M. Zamir A. Koshuriyan
YHYuji Hattori
Yuji Hattori
MHMakoto Hirota
Makoto Hirota
High-amplitude freestream turbulence and surface roughness elements can excite a laminar boundary-layer flow sufficiently to cause streamwise-oriented vortices to develop. These vortices resemble elongated streaks having alternate spanwise variations of the streamwise velocity. Downstream, the vortices “wobble” through an inviscid secondary instability mechanism and, ultimately, transition to turbulence. We formulate an optimal control algorithm to suppress the growth rate of the streamwise vortex system. Considering a high-Reynolds-number asymptotic framework, we reduce the full compressible Navier–Stokes equations to the nonlinear compressible boundary-region equations. We then implement the method of Lagrange multipliers via an appropriate transformation of the original constrained optimization problem into an unconstrained form to obtain the disturbance equations in the form of the adjoint compressible boundary-region equations (ACBREs) and corresponding optimality conditions. Numerical solutions of the ACBRE approach for high-supersonic and hypersonic flows reveal a significant reduction in the kinetic energy and wall shear stress for all considered configurations. We present contour plots to demonstrate the qualitative effect of increased control iterations. Our results indicate that the primary vortex instabilities gradually flatten in the spanwise direction thanks to the ACBRE algorithm.

28 July 2021
Verified
Conference Paper
Open access
OEOmar Es-Sahli
Omar Es-Sahli
Adrian SescuAdrian Sescu
Adrian Sescu
MAMohammed Z. Afsar
Mohammed Z. Afsar
YHYuji Hattori
Yuji Hattori
MHMakoto Hirota
Makoto Hirota
View Video Presentation: https://doi.org/10.2514/6.2021-2945.vid High-amplitude free-stream turbulence and large surface roughness elements can excite a laminar boundary layer sufficiently enough to cause streamwise oriented vortices to form. The latter is accompanied by streaks of varying amplitudes that `wobble' through inviscid secondary instabilities and, ultimately, transition to turbulence. In this paper, we formulate a mathematical framework for the optimal control of compressible boundary layers to suppress the growth rate of the streamwise vortex system before breakdown occurs. This has a commensurate impact on the wall shear stress and heat transfer at the wall. Flow instabilities are introduced either through roughness elements equally separated in the spanwise direction or via free-stream disturbances. The compressible Navier-Stokes equations are reduced to the boundary region equations (BRE) in a high Reynolds number asymptotic framework wherein the streamwise wavelengths of the disturbances are assumed to be much larger than the spanwise and wall-normal counterparts. The method of Lagrange multipliers is used to derive the adjoint compressible boundary region equations via an appropriate transformation of the original constrained optimization problem into an unconstrained form. In the present formulation, the wall transpiration velocity represents the control variable while the wall shear stress or the vortex energy represents the cost functional. Our study shows that this kind of control approach induces a significant reduction in the kinetic energy and wall shear stress of the boundary layer flow. Contour plots visually demonstrate how the primary instabilities gradually flatten out as more control iterations are applied.

11 May 2024 in Fluids
Verified
Journal Article
Open access
PDF file
OEOmar Es-Sahli
Omar Es-Sahli
Adrian SescuAdrian Sescu
Adrian Sescu
YHYuji Hattori
Yuji Hattori
Curved free shear layers emerge in many engineering problems involving complex flow geometries, such as the flow over a backward-facing step, flows with wall injection in a boundary layer, the flow inside side-dump combustors, or wakes generated by vertical axis wind turbines, among others. Previous studies involving centrifugal instabilities have mainly focused on wall-flows where Taylor instabilities between two rotating concentric cylinders or Görtler vortices in boundary layers are generated. Curved free shear layer flows, however, have not received sufficient attention, especially in the nonlinear regime. The present work investigates the development of centrifugal instabilities in a curved free shear layer flow in the nonlinear compressible regime. The compressible Navier–Stokes equations are reduced to the nonlinear boundary region equations (BREs) in a high Reynolds number asymptotic framework, wherein the streamwise wavelength of the disturbances is assumed to be much larger than the spanwise and wall-normal counterparts. We study the effect of the freestream Mach number M∞, the shear layer thickness δ, the amplitude of the incoming disturbance A, and the relative velocity difference across the shear layer ΔV on the development of these centrifugal instabilities. Our parametric study shows that, among other things, the kinetic energy of the curved shear layer flow increases with increasing ΔV and A decreases with increasing delta. It was also found that increasing the disturbance amplitude of the incoming disturbance leads to significant growth in the mushroom-like structure’s amplitude and renders the secondary instability structures more prominent, indicating increased mixing for all Mach numbers under consideration.

23 September 2024 in Fluids
Verified
Journal Article
Open access
PDF file
MBMatthew Brockhaus
Matthew Brockhaus
Adrian SescuAdrian Sescu
Adrian Sescu
JMJonathan F. Morrison
Jonathan F. Morrison
The effect of wall deformations on wall turbulence is a topic of fundamental importance for the advancement of flow control strategies aimed at reducing the frictional drag. Dynamic wall deformations in the form of wall-normal of in-plane oscillations represents an area that is yet to be fully explored, and that can open a new realm of drag control strategies, as well as provide fresh insights into the structure of wall turbulence. In this study, we present several results from direct numerical simulations aimed at understanding the response of wall turbulence to standing wave-like wall motion, arranged in a checkerboard pattern. More specifically, here we target a low Reynolds number turbulent channel flow, featuring standing wave-like dynamic wall deformations on both bottom and top walls, with parameterizations in terms of the frequency of oscillations, roughness height, and spacing. We quantify the effect that this type of wall motion can have on the skin friction drag, various turbulent statistics, and turbulent flow structures. In addition, taking advantage of the periodicity and the symmetry of the flow, an improved phase-averaging procedure is introduced, which enhances the smoothness of the data. The results show that this type of dynamic wall deflection can have a significant effect on the turbulent flow in proximity to the wall, and that the variation of the spatial wavenumbers of the wall deflections can make a big difference. A slight total drag reduction, in the order of 2%, was observed for some combinations of wavenumbers and frequencies, especially for the highest streamwise wavenumber case.