20 December 2024 in Science Advances
Real-time monitoring of infinitesimal deformations on complex morphologies is essential for precision biomechanical engineering. While flexible strain sensors facilitate real-time monitoring with shape-adaptive properties, their sensitivity is generally lower than spectroscopic imaging methods. Crack-based strain sensors achieve enhanced sensitivity with gauge factors (GFs) exceeding 30,000; however, such GFs are only attainable at large strains exceeding several percent and decline below 10 for strains under 10 −3 , rendering them inadequate for minute deformations. Here, we introduce hypersensitive and flexible “meta-crack” sensors detecting infinitesimal strains through previously undiscovered crack-opening mechanisms. These sensors achieve remarkable GFs surpassing 1000 at strains of 10 −4 on substrates with a Poisson’s ratio of −0.9. The crack orientation–independent gap-widening behavior elucidates the origin of hypersensitivity, corroborated by simplified models and finite element analysis. Additionally, parallel mechanical circuits of meta-cracks effectively address the trade-off between resolution and maximum sensing threshold. In vivo real-time monitoring of cerebrovascular dynamics with a strain resolution of 10 −5 underscores the hypersensitivity and conformal adaptability of sensors.
5 March 2026 in Nature Sustainability
15 September 2026 in Advanced Functional Materials
3D printing of bioelectronics offers a versatile platform for fabricating personalized and structurally integrated electronic systems within biological scaffolds. Biodegradable electronics, which naturally dissolve after their functional lifetime, minimize the long‐term burden on both patients and healthcare providers by eliminating the need for surgical retrieval. In this study, we developed a library of 3D‐printable, biodegradable electronic inks encompassing conductors, semiconductors, and dielectrics, thereby enabling the direct printing of fully functional, multi‐material, customizable electronic systems in a single integrated process. Especially, conjugated molecules were introduced to improve charge mobility and energy level alignment in semiconducting inks. This ink platform supports the fabrication of passive and active components and physical and chemical sensors, making it suitable for complex biomedical applications. Versatility of this system was demonstrated through two representative applications: (i) wireless pressure sensor embedded within biodegradable scaffolds, (ii) wireless electrical stimulators that retain programmable electrical functionality in vivo and degrade post‐implantation. This work establishes a foundation of modules for autonomous, biodegradable bioelectronic systems fabricated entirely via 3D printing, with implications for personalized diagnostics, therapeutic interfaces, and transient medical devices.