1 January 2022 in Nanotechnology Reviews
In recent years, PVDF(polyvinylidene fluoride) and its copolymers have attracted great attention in the development of energy-harvesting devices because of their unique properties such as good flexibility, environmental friendliness, high halogen and acid resistance, lightweight and good biocompatibility. Compared to the most commonly used PZT (lead zirconate titanate), the piezoelectricity of PVDF and its copolymer-based materials is relatively low. To further expand the applications of PVDF, there is an urgent need for efficient methods to prepare high piezoelectric polymers or composites. In this work, the crystal phases are introduced first. Then, the preparation methods of PVDF and its copolymer-based materials are summarized, which are mainly focused on four determining factors of piezoelectricity. The mechanisms of piezoelectric β-phase formation and α- to β-phase transformation are introduced. The influence parameters of each process and their interactions are discussed in detail. In the last section, the progress of the preparation methods is summarized. This work will provide useful information to researchers working on piezoelectric composites.
1 June 2019 in Composites Part A: Applied Science and Manufacturing
1 January 2023 in Open Physics
Poly(vinylidene fluoride) (PVDF) and its copolymers are promising candidates for energy-harvesting devices because of their flexibility, environmental friendliness, lightweight, and high halogen and acid resistance. However, the relatively low piezoelectricity limits their applications. The piezoelectricity of PVDF and its copolymers highly depends on the polar β-phase, while the non-polar α-phase is the most common one. As a result, the β-phase formation and α- to β-phase transformation have attracted much attention in recent years. Stretching is a widely used method to induce the α- to β-phase transformation for the improvement of piezoelectricity. In this work, the influences of the parameters during stretching on phase evolution and piezoelectricity are discussed and summarized. Besides, nontraditional stretching methods are also introduced and discussed. This work will provide important information for preparing high-performance piezoelectric polymer films.
1 January 2021 in Nanotechnology Reviews
Poly(vinylidene fluoride) (PVDF) and its copolymers exhibit excellent piezoelectric properties and are potential materials for high efficiency energy harvesting devices. In this study, poly(vinylidene fluoride- co -hexafluoropropylene) (PVDF-HFP) films are prepared by the solution casting method. The prepared film is then subjected to mechanical stretching and poling process. By adjusting the temperature of the poling process and the elongation ratio of the mechanical stretching process, the relative content of β-phase F (β) increases significantly, leading to high piezoelectric performance. The maximum output voltage of the PVDF-HFP films poled at 40°C reaches 3.67 V, 71% higher than that of the films poled at room temperature. Fourier transform infrared spectroscopy analysis (FTIR), XRD (X-ray diffraction), and differential scanning calorimetry are used to investigate the influences of mechanical stretching and poling process on the crystal structure to discover the enhancement mechanism. This work provides a straightforward and low-cost route to prepare high piezoelectric PVDF-HFP-based materials.
23 November 2021 in Advanced Science
Boosting the output performance of triboelectric nanogenerators via some unique methods is always a meaningful way to speed up their commercialization. However, the available approach to boost performance is mainly restricted to one physics effect based and the basic research of boosting performance via mutual coupling effects is little research. Herein, a new strategy is creatively proposed based on charge traps from mutual coupling effects, generated from g‐C3N4/MXene‐Au composites, to further promote the output performance of triboelectric nanogenerator. It is found that photon‐generated carriers coupling surface plasmon effect enables composites filled into tribo‐material with visible light is an excellent value in boosting performance. The charge traps from mutual coupling effects for boosting performance are analyzed theoretically and verified by experiments. The output power of boosting‐triboelectric nanogenerator (TENG) achieves a sixfold enhancement (20 mW) of normal TENG with polydimethylsiloxane (PDMS) in ambient conditions. This work provides a profound understanding of the working mechanism of mutual coupling effects boosting the performance of TENG and an effective way for promoting TENG output.
23 December 2021 in Nanotechnology Reviews
Poly(vinylidene fluoride) (PVDF) and its copolymers have been widely studied due to their excellent piezoelectricity and ferroelectricity. In this study, composite films are prepared by adding Ni nanoparticles (0.00–0.3 wt%) into poly(vinylidene fluoride- co -hexafluoropropylene) (PVDF–HFP) matrix by solution casting, uniaxial stretching, and high electric field poling. It is found that when the maximum electric field E max for poling is 130 MV m −1 , the calibrated open circuit voltage of the pure PVDF–HFP films reaches 3.12 V, which is much higher than those poled by a lower electric field (70 MV m −1 : 1.40 V; 90 MV m −1 : 2.29 V). This result shows that the effect of poling on the generated output voltage is decisive. By adding 0.1 wt% Ni nanoparticles, it increases to 3.84 V, 23% higher than that of the pure PVDF–HFP films. To further understand the enhancement mechanism, the effects of Ni nanoparticles on initial crystallization, uniaxial stretching, and high electric field poling are investigated by X-ray diffraction, scanning electron microscope, Fourier transform infrared spectroscopy, and differential scanning calorimetry.