Boosting the output performance of triboelectric nanogenerators via some unique methods is always a meaningful way to speed up their commercialization. However, the available approach to boost performance is mainly restricted to one physics effect based and the basic research of boosting performance via mutual coupling effects is little research. Herein, a new strategy is creatively proposed based on charge traps from mutual coupling effects, generated from g‐C₃N₄/MXene‐Au composites, to further promote the output performance of triboelectric nanogenerator. It is found that photon‐generated carriers coupling surface plasmon effect enables composites filled into tribo‐material with visible light is an excellent value in boosting performance. The charge traps from mutual coupling effects for boosting performance are analyzed theoretically and verified by experiments. The output power of boosting‐triboelectric nanogenerator (TENG) achieves a sixfold enhancement (20 mW) of normal TENG with polydimethylsiloxane (PDMS) in ambient conditions. This work provides a profound understanding of the working mechanism of mutual coupling effects boosting the performance of TENG and an effective way for promoting TENG output.

Energy-harvesting devices based on a single energy conversion mechanism generally have a low output and low conversion efficiency. To solve this problem, an energy harvester coupled with a triboelectric mechanism and electrostatic mechanism for biomechanical energy harvesting is presented. The output performances of the device coupled with a triboelectric mechanism and electrostatic mechanism were systematically studied through principle analysis, simulation, and experimental demonstration. Experiments showed that the output performance of the device was greatly improved by coupling the electrostatic induction mechanisms, and a sustainable and enhanced peak power of approximately 289 μW was produced when the external impedance was 100 MΩ, which gave over a 46-fold enhancement to the conventional single triboelectric conversion mechanism. Moreover, it showed higher resolution for motion states compared with the conventional triboelectric nanogenerator, and can precisely and constantly monitor and distinguish various motion states, including stepping, walking, running, and jumping. Furthermore, it can charge a capacitor of 10 μF to 3 V within 2 min and light up 16 LEDs. On this basis, a self-powered access control system, based on gait recognition, was successfully demonstrated. This work proposes a novel and cost-effective method for biomechanical energy harvesting, which provides a more convenient choice for human motion status monitoring and can be widely used in personnel identification systems.

Marine wave energy exhibits significant potential as a renewable resource due to its substantial energy storage capacity and high energy density. However, conventional wave power generation technologies often suffer from drawbacks such as high maintenance costs, cumbersome structures, and suboptimal conversion efficiencies, thereby limiting their potential. The wave power generation technologies based on micro-energy technology have emerged as promising new approaches in recent years, owing to their inherent advantages of cost-effectiveness, simplistic structure, and ease of manufacturing. This paper provides a comprehensive overview of the current research status in wave energy harvesting through micro-energy technologies, including detailed descriptions of piezoelectric nanogenerators, electromagnetic generators, triboelectric nanogenerators, dielectric elastomer generators, hydrovoltaic generators, and hybrid nanogenerators. Finally, we provide a comprehensive overview of the prevailing issues and challenges associated with these technologies, while also offering insights into the future development trajectory of wave energy harvesting technology.

The electric power equipment industry is rapidly advancing toward “informationization,” with the swift progression of intelligent sensing technology serving as a key driving force behind this transformation, thereby triggering significant changes in global electric power equipment. In this process, intelligent sensing has created an urgent demand for high-performance integrated power systems that feature compact size, lightweight design, long operational life, high reliability, high energy density, and low cost. However, the performance metrics of traditional power supplies have increasingly failed to meet the requirements of modern intelligent sensing, thereby significantly hindering the advancement of intelligent power equipment. Energy harvesting technology, characterized by its long operational lifespan, compact size, environmental sustainability, and self-sufficient operation, is capable of capturing renewable energy from ambient power sources and converting it into electrical energy to supply power to sensors. Due to these advantages, it has garnered significant attention in the field of power sensing. This paper presents a comprehensive review of the current state of development of energy harvesting technologies within the power environment. It outlines recent advancements in magnetic field energy harvesting, electric field energy harvesting, vibration energy harvesting, wind energy harvesting, and solar energy harvesting. Furthermore, it explores the integration of multiple physical mechanisms and hybrid energy sources aimed at enhancing self-powered applications in this domain. A comparative analysis of the advantages and limitations associated with each technology is also provided. Additionally, the paper discusses potential future directions for the development of energy harvesting technologies in the power environment.

Increasing energy consumption and environmental pollution problems have forced people to turn their attention to the development and utilization of hydrogen energy, which requires that hydrogen energy can be efficiently prepared. However, the sluggish kinetics of hydrogen evolution reaction (HER) requires higher overpotential. It is urgent to design and fabricate catalysts to drive the procedure and decrease the overpotential of HER. It is well known that platinum catalysts are the best for HER, but their high cost limits their wide application. Transition metals such as Fe, Co, Mo and Ni are abundant, and transition metal phosphides are considered as promising HER catalysts. Nevertheless, catalysts in powder form are very easily soluble in the electrolyte, which leads to inferior cycling stability. In this work, Ni₅P₄ anchored on Ni foam was doped with Se powder. After SEM characterization, the Ni₅P₄-Se was anchored on Ni foam, which circumvents the use of the conductive additives and binder. The Ni₅P₄-Se formed a porous nanosheet structure with enhanced electron transfer capability. The prepared Ni₅P₄-Se exhibited high electrochemical performances. At 10 mA cm⁻², the overpotential was only 128 mV and the Tafel slope is 163.14 mV dec⁻¹. Additionally, the overpotential was stabilized at 128 mV for 30 h, suggesting its excellent cycling stability. The results show that Se doping can make the two phases achieve a good synergistic effect, which makes the Ni₅P₄-Se catalyst display excellent HER catalytic activity and stability.

In recent years, the advent of the smart era has confronted a novel “energy crisis”—the challenge of distributed energy provision, necessitating an imperative for clean energy development. Encompassing 71% of the Earth’s surface, water stands as the predominant conduit for energy transfer on our planet, effectively harnessing a fraction thereof to fulfill global energy demands. Modern hydropower technology primarily harnesses concentrated low-entropy water energy. However, the majority of natural water energy is widely dispersed in the environment as high-entropy distributed water energy, encompassing raindrop energy, stream energy, wave energy, evaporation energy, and other small-scale forms of water energy. While these energies are readily available, their collection poses significant challenges. Consequently, researchers initiated investigations into high-entropy water energy harvesting technology based on the electrodynamic effect, triboelectric effect, water volt effect, and other related phenomena. The present paper provides a comprehensive review of high-entropy water energy harvesting technologies, encompassing their underlying mechanisms, optimization strategies, and diverse applications. The current bottlenecks of these technologies are comprehensively analyzed, and their future development direction is prospectively discussed, thereby providing valuable guidance for future research on high-entropy water energy collection technology.