12 May 2023 in IEEE Transactions on Intelligent Vehicles
In this work, we consider a novel reconfigurable intelligent surface (RIS)-assisted full-duplex (FD) sixth generation (6G)-vehicle-to-everything (V2X) communication network having a FD base station (BS) simultaneously communicating with a uplink (UL) and a downlink (DL) mobile vehicles with the aide of two RISs, one for each link. We provide an analytical framework to investigate the performance of this network and, consequently, formulate an optimization problem to jointly optimize the phase shift matrices at both the RISs that maximize the achievable sum-rate. Thereafter, due to the non-convex nature of the problem, we propose a low complexity proximal policy optimization (PPO)-based deep reinforcement learning (DRL) algorithm that solves the problem in continuous action spaces by reducing the overall training overhead and provides optimum values of phase-shift matrix at each RIS. Further, we extend the analysis considering multiple transmit and receive antennas at the BS that simultaneously serves multiple UL and DL vehicles. We present exhaustive simulations-based graphical results to validate the effectiveness and accuracy of the proposed algorithm compared to deep deterministic policy gradient (DDPG) and successive refinement (SR)-based solutions. Accordingly, we demonstrate the dominance of the considered FD system over its half-duplex (HD) counterpart. We also discuss the impact of the number of elements at each RIS, each vehicle's velocity and their distance from the RIS and the BS on the performance of the respective links. Moreover, we also highlight the impact of imperfect self-interference cancellation and discuss the trade-off between the UL and DL performances due to this imperfection. Additionally, it is shown that the proposed algorithm is approximately $10 \times$ and $ 40 \times$ faster than DDPG and SR, respectively. Finally, for the multiple vehicle case, we demonstrate the effect of co-channel interference on the DL rate and the impact of RIS elements, the number of UL and DL vehicles on the system performance.
11 December 2024 in IEEE Open Journal of the Communications Society
A shortage of frequencies exists due to the demand of extensive connectivity and limited availability of spectrum. Thus a prominent solution of sharing spectrum between radar and communication systems has been proposed. Integrated sensing and communication (ISAC) aims to achieve complete integration and reciprocal advantages between communication and sensing processes. In this work, we consider Simultaneous Transmission and Reflection (STAR) Reconfigurable Intelligent Surface (S-RIS) and passive RIS (P-RIS) assisted dual-function radar communication system where S-RIS and P-RIS assist communication and sensing functionalities, respectively. We formulate an optimization problem that jointly optimizes the beamforming vector at the multi-antenna ISAC transmitter and phase shift vector to maximize the weighted sum-rate (WSR) at the communication users while taking care of the maximum power limit the ISAC transmitter and ensuring the performance of sensing model to detect targets and limitations of phase and amplitude of S-RIS elements. To address the non-convexity, we propose a low-complexity alternating optimization (AO) algorithm. Furthermore, we provide simulation results to verify the viability of the proposed framework with its a) only P-RIS assisted scheme, and b) proposed model with random phase shift, counterparts. The proposed algorithm is also shown to be effective in delivering nearly optimal design outcomes in scenario where the channel state information is imperfect (ICSI). Simulation results demonstrate the impact of RIS elements, number of antennas at the ISAC transmitter and the transmit power on WSR. Accordingly, we illustrate the impact of S-RIS and reflection users (RU) locations and the effect of sensing threshold and the number of targets which highlights the trade-off between sensing and communication. The S-RIS framework offer approximately performance gain of 12.5% and 38.8% as compared to conventional and random cases, respectively.
7 June 2024 in IEEE Internet of Things Journal
In this article, we propose a novel framework that combines simultaneous localization and communication (SLAC) using a reconfigurable intelligent surface (RIS) aided integrated sensing and communication (ISAC) systems. Our primary focus is on enhancing resource efficiency in such systems. We introduce Cloud Radio Access Networks (C-RAN) that facilitate collaboration between multiple base stations (BSs), enhancing cooperation benefits for both communication and sensing capabilities. To evaluate localization performance, we formulate an optimization problem to minimize the squared position error bound (SPEB) that reflects the system functional performance by optimizing the transmit beamformer, phase shift and subcarrier assignment under certain constraints. Moreover, in order to adjust the phase shift of the RIS, we propose a RIS-aided cooperative ISAC SLAC protocol. This approach utilizes the measurements collected to refine the location and velocity estimates of the agent, as well as to reconstruct the environmental map with enhanced accuracy. However, the high dimensionality of the decision space makes the problem computationally intensive and challenging to navigate using gradient-based or exhaustive search methods. To efficiently tackle these issues, we construct a framework based on Markov decision processes (MDPs) and address it by introducing a novel algorithm called hybrid deep reinforcement learning (HDRL) algorithm. We validate our proposed algorithm through various simulations, demonstrating its effectiveness in improving system performance by comparing with the baseline schemes.
6 March 2025 in IEEE Transactions on Communications
In this paper, we consider a novel hybrid reconfigurable intelligent surface (HRIS) consisting of active as well as passive reflecting elements mounted on unmanned aerial vehicle (UAV). The aim is to improve air-to-ground communication by assisting multiple users, while detecting several low mobility targets. We formulate a sum-rate optimization problem that accounts for statistical channel estimation errors (SCEEs) to concurrently fine-tune both active and passive phase-shift matrices, UAV trajectory, and transmit beamformer for integrated sensing and communication (ISAC). Subsequently, we introduce a transfer learning based approach combining with deep deterministic policy gradient (DDPG) to enhance the overall data rate while minimizing the time it takes for users to transmit data. Additionally, we present an alternating optimization (AO) algorithm that employs a repetitive method to address the combinatorial nonconvex optimization problem and offers a solution that is very close to optimal. Finally, we showcase the superiority of the proposed scheme through Monte Carlo simulations. Also, we have compared the performance with perfect channel state information (CSI) counterpart. The outcomes of simulations confirm the theoretical analysis and demonstrate the efficiency of the proposed framework. Additionally, the results reveal the advantages of incorporating HRIS aided UAV assisted ISAC in improving the quality of both communication and sensing performance.
6 May 2024 in IEEE Transactions on Green Communications and Networking
With 5G technology evolving, Open Radio Access Network (O-RAN) solutions are becoming crucial, especially for handling the diverse Quality of Service (QoS) needs in vehicular networks. These networks are dynamic and have many different applications, calling for effective O-RAN strategies. This paper examines a three-tier hierarchical O-RAN slicing model, created to address the unique challenges of vehicular networks. The top-level follow 3GPP standards like ultra-reliable and low-latency communications (URLLC), enhanced mobile broadband (eMBB), and massive machine-type communications (mMTC). The middle level is organized by vehicle types, and the lowest level is designed for specific vehicle applications. This approach leads to better network resource management. Additionally, this study explores the advantages of a federated deep reinforcement learning (DRL) approach for efficient learning while maintaining privacy. It introduces a federated DRL approach incorporating federated averaging and deep deterministic policy gradient (DDPG) techniques, to enhance inter-slice operations and resource allocation in vehicular networks. Lastly, the effectiveness of this algorithm is demonstrated through a small simulation in a vehicular framework.
12 September 2023 in IEEE Access
In this paper, we propose an innovative framework for vehicular communication utilizing reconfigurable intelligent surfaces (RIS) in the millimeter-wave (mmWave) spectrum. Specifically, we consider a scenario where a base station (BS) employs multiple RISs to serve a vehicular user, considering both perfect and imperfect channel state information (ICSI) to account for real-world conditions. The vehicular user sends an uplink training pilot sequence, which is received by the BS through multiple RISs. We formulate an optimization problem to simultaneously optimize the precoder at the BS and the passive beamforming/passive phase shift matrix at each RIS in order to maximize the achievable rate for the vehicle. By leveraging the received signals with varying phase shifts, we provide a solution based on deep learning (DL) that effectively learns to utilize these signals for predicting the optimal phase shift matrix. Through extensive numerical analysis, we validate the effectiveness of our proposed solution by comparing it to the successive refinement (SR) benchmark scheme. Furthermore, it demonstrates that the proposed DL-based beamforming solution achieves an achievable rate near to the upper bound with the increase in dataset size, eliminating the need for additional training overhead. The incorporation of RIS amplifies the achievable rate, especially in high-mobility scenarios, without necessitating additional complex beamforming solutions. In addition, we also evaluate the performance of the proposed solution in the presence of ICSI. We analyze the impact of the key system parameters, including the number of elements in the RIS, the speed of the vehicle, the transmit power, the distance between devices, and other relevant factors, on the performance of the considered system.