Fabio Quadrelli

Fabio Quadrelli

Auto-generated profile, based on publicly available information

Fabio Quadrelli

Department of Industrial and Information Engineering, University of Pavia, Pavia, Italy

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2018
Verified
Conference Paper
Closed access
FPFabio Padovan
Fabio Padovan
FQFabio Quadrelli
Fabio Quadrelli
MBMatteo Bassi
Matteo Bassi
MTMarc Tiebout
Marc Tiebout
ABAndrea Bevilacqua
Andrea Bevilacqua
The relentless development of next-generation communication and radar systems sets increasingly stringent requirements on the spectral purity of local oscillators. Decreasing phase noise is crucial to support efficient modulation formats with large symbol constellations, as well as to enable innovative radar applications, e.g., anti-collision, gesture recognition, and medical imaging. To minimize phase noise, bipolar transistors offer some advantages over ultra-scaled CMOS: higher supply voltage (thus larger oscillation amplitudes), lower 1/f noise, higher-Q passives (due to higher resistivity substrate and, possibly, thicker metals), and higher f T , f max for a given technology node, which results in a cost advantage for a variety of medium-volume applications (e.g., infrastructure transceivers). For a given supply voltage, a tank showing a smaller resistance at resonance yields lower phase noise. As a result, the minimum phase noise achievable by a single voltage-controlled oscillator (VCO) is ultimately bounded by the smaller realizable inductor displaying the highest Q. To achieve significantly lower phase noise levels, bilaterally coupling N oscillators [1-3] is a viable option. However, to fully preserve the 10log(N) phase-noise advantage, while avoiding undesired multi-tone concurrent oscillations, the coupling network must be carefully designed. This work presents a quad-core bipolar VCO achieving phase noise as low as -124dBc/Hz at 1MHz offset from the 15GHz carrier, -189dBc/Hz figure-of-merit (FOM), and 16% tuning range. Insights are given into the design of the resistive network employed to couple the four oscillators, a key element in achieving the reported performance.

1 April 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
FQFabio Quadrelli
Fabio Quadrelli
DMDavide Manente
Davide Manente
DSDavid Seebacher
David Seebacher
FPFabio Padovan
Fabio Padovan
MBMatteo Bassi
Matteo Bassi
ABAndrea Bevilacqua
Andrea Bevilacqua
This article presents a Ka-band bidirectional transceiver front end and its integration in an image-reject up/down converter module in 28-nm bulk CMOS. In the radio frequency (RF) front end, a transformer-based transmit/receive (T/R) switch is exploited for minimum area occupation without affecting the linearity and the isolation between the transmitter (TX) and receiver (RX) paths. The TX front end shows 19-dB power gain with an output-referred ${{ OP}_{ 1,dB}}$ of 14 dBm and 18.7% power-added efficiency (PAE). Tested with a 100-MHz 64-QAM orthogonal frequency-division multiplexing (OFDM) modulated input signal, the error vector magnitude (EVM) is below 5% up to an average output power of 6.6 dBm, with a corresponding 7% PAE. The RX in the front end features a minimum noise figure (NF) of 4.9 dB, with 17-dB power gain. The measured input IP3 is -9.2 dBm, while the power consumption is only 35 mW. The RF bandwidth is 22-31 GHz, wide enough to cover the fifth-generation (5G) new radio (NR) bands n257, n258, and n261. The RF front end is also monolithically integrated along with a broadband bidirectional frequency up/down converter, capable of translating the 5G modulated signal from/to a 3-GHz intermediate frequency (IF). The up/down converter is realized with a single bidirectional quadrature mixer shared between the TX and RX paths. At the IF, a single hybrid coupler is used for quadrature phase shifting in upconversion and recombination in downconversion while concurrently keeping the TX and RX IF paths isolated from each other. In the upconversion mode, the module features a 22-dB programmable conversion gain, with a 40-dB minimum in-band image rejection ratio (IRR). The downconversion path shows a 29-dB programmable conversion gain and a minimum measured NF and IRR of 8.5 and 30 dB, respectively, while consuming 110 mW.

1 June 2019
Verified
Conference Paper
Closed access
FQF. Quadrelli
F. Quadrelli
FPF. Panazzolo
F. Panazzolo
MTM. Tiebout
M. Tiebout
FPF. Padovan
F. Padovan
MBM. Bassi
M. Bassi
ABA. Bevilacqua
A. Bevilacqua
This paper describes a bank of four SiGe BiCMOS oscillators tailored to cover the 18.2-29.3 GHz frequency range, needed to tackle the needs of 5G communications. The Colpitts oscillator topology is leveraged to achieve a lower absolute phase noise compared to Class-C oscillators, at the expense of deteriorated figure of merit. Benefiting from the proper technology choice, a careful tank design was carried out to maximize Q, minimize K VCO and phase noise variations. The four oscillators feature state-of-the-art phase noise, ranging from -119.5 dBc/Hz to -116.5 dBc/Hz at 1MHz offset for 18.2 GHz and 29.3 GHz carrier frequency, respectively. For each oscillator the phase noise variation is only <2 dB over -20°C to 85°C temperature range and <6 dB over the whole 47% tuning range.

11 August 2021 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
AFAlessandro Franceschin
Alessandro Franceschin
FQFabio Quadrelli
Fabio Quadrelli
FPFabio Padovan
Fabio Padovan
MBMatteo Bassi
Matteo Bassi
AMANDREA MAZZANTI
ANDREA MAZZANTI
ABAndrea Bevilacqua
Andrea Bevilacqua
This letter presents a circuit solution to extract the 4th harmonic from a class-C voltage-controlled oscillator. The tail capacitor in the class-C oscillator is replaced by a dual-resonance network that allows the extraction of the 4th harmonic, while yielding low impedance at even harmonics, key to mantain transistor operation in class-C. The validity of the proposed approach is demonstrated on a 20 GHz 28 nm CMOS oscillator. The circuit achives a phase noise as low as -111 dBc/Hz at 3 MHz offset from a 78 GHz carrier while consuming 57 mW, with a figure of merit of -182 dBc/Hz, 12% tuning range and DC to RF conversion of 0.7%. The undesired harmonics are suppressed by more than 70 dB.

2 July 2020 in IEEE Solid-State Circuits Letters
Verified
Journal Article
Closed access
AGAlessandro Garghetti
Alessandro Garghetti
FQFabio Quadrelli
Fabio Quadrelli
MBMatteo Bassi
Matteo Bassi
AMANDREA MAZZANTI
ANDREA MAZZANTI
This letter presents the analysis of phase noise generated from the base resistance in the bipolar transistor Class-C oscillator. It is found that the efficient pulsed current of transistors enhances this noise contribution. Moreover, the impact of the base resistance noise rises quickly with the oscillation amplitude, limiting the benefits of rising the supply voltage to reduce phase noise and penalizing the figure of merit (FoM). Furthermore, the amplitude stability problem is addressed and a simple expression for the maximum tail capacitance to prevent instability is derived. The phase noise analysis is validated by measurements on a 12GHz Class-C HBT VCO. With 3.4V supply the VCO reaches -187dBc/Hz FoM, limited by the base resistance noise. The impact of this noise source is reduced by decreasing the supply voltage, and with 1.8V supply the VCO maintains a state-of-the-art phase noise (-120dBc/Hz at 1MHz) with an excellent -190dBc/Hz FoM.

1 September 2017
Verified
Conference Paper
Closed access
FBFabio Boscolo
Fabio Boscolo
FPFabio Padovan
Fabio Padovan
FQFabio Quadrelli
Fabio Quadrelli
MTMarc Tiebout
Marc Tiebout
ANAndrea Neviani
Andrea Neviani
ABAndrea Bevilacqua
Andrea Bevilacqua
A SiGe BiCMOS Colpitts VCO with a transformer-coupled varactor operating from 18.8 to 23.1 GHz is presented. The Colpitts topology is leveraged to trade a slight degradation in the oscillator figure-of-merit for very low phase noise. The oscillator features a state-of-the-art phase noise of -119.4 dBc/Hz at 1 MHz offset from the carrier, while drawing 17.5 mA from the 4 V supply. The oscillator FoM is -188 dBc/Hz. The VCO also shows a wide 20.5% tuning range, which results in a FoM T = -194 dBc/Hz.