Rapid ON/OFF (ROO) operation helps scale power in accordance with link utilization. In this article, we present a baud-rate ROO receiver that can turn on in just 10 ns (~120 UI). Baud-rate clock and data recovery (CDR) is implemented using a new timing function that is amenable to operation with a loop un-rolled decision feedback equalizer (DFE). The receiver is turned on rapidly by sweeping the recovered clock phase across the received data bit by offsetting the digitally controlled oscillator (DCO) frequency at each power-ON event. This first ROO DFE receiver also includes a continuous-time linear equalizer (CTLE) and three-tap DFE to compensate up to 20-dB channel loss at Nyquist. Fabricated in a 65-nm CMOS process, the prototype receiver recovers 12 Gb/s with BER < 10⁻¹² and achieves a >30-MHz JTOL corner, 377 fsrms recovered clock jitter, and 3.8-pJ/bit energy efficiency.
17 March 2021 in IEEE Journal of Solid-State Circuits
High-speed, low-power optical interconnects, such as intensity modulation direct detection (IMDD) optical links, are increasingly deployed in data centers to keep pace with the growing bandwidth requirements. High-sensitivity low-power optical receivers (RXs) are the key components that enable energy-efficient IMDD optical interconnects. This article presents a low-power nonreturn-to-zero (NRZ) optical RX using a combination of a limited-bandwidth trans-impedance amplifier (TIA) and duobinary sampling to improve RX sensitivity at high data rates. Duobinary sampling leverages the well-controlled TIA inter-symbol interference (ISI) to recover the transmitted data, making it much more hardware efficient than canceling the ISI using a decision feedback equalizer (DFE). The proposed optical RX employs a CMOS-based analog front-end (AFE) to achieve high linearity and excellent power efficiency. Fabricated in 65-nm CMOS process, the prototype RX achieves optical modulation amplitude (OMA) sensitivity of -11.6 dBm at 16 Gb/s with 0.7-pJ/bit efficiency.
1 January 2019 in IEEE Journal of Solid-State Circuits