4 July 2024 in Journal of Energy Chemistry
14 February 2019 in Fullerenes, Nanotubes and Carbon Nanostructures
In this paper, graphene oxide (GO) was synthesized by pressurized oxidation method and GO-modified asphalt was prepared by solution melting method. The structure and morphology of GO was characterized by Raman spectra, Fourier Transform infrared spectroscopy (FTIR) and transmission electron microscope (TEM), and the results showed that single-layer or few-layer large size GO was obtained. The chemical structure of the GO-modified asphalt and the SARA (saturates, aromatics, resins and asphaltenes) components were characterized by FTIR and thin-layer chromatography with flame ionization detector (TLC/FID). In addition, the effect of GO on the physical properties of base asphalt was also studied. The results showed that there was no chemical change in the modification process and that GO was physically dispersed in the asphalt. GO has little influence on the penetration, ductility, softening point and penetration index of asphalt, the adhesion and temperature stability of asphalt are not changed much. The addition of GO differs from the adsorption of light components by polymer-modified asphalt, but fundamentally hinders the thermal oxygen conversion between the components and improved the low-temperature crack resistance of modified asphalt.
17 October 2019 in New Journal of Chemistry
Silicon (Si) is proposed as a promising anode material for high-performance lithium-ion batteries (LIBs) due to its ultrahigh theoretical capacity. However, this material suffers from serious volume expansion during lithium insertion and extraction processes and even severe pulverization, so the practical commercial application of Si electrode materials still faces numerous challenges. Herein, the natural polymer konjac flour (KF) and polyvinylpyrrolidone (PVP) are used as the carbon source and the nitrogen source, respectively, to synthesize Si/SiOx/N–C composites by a scalable sol–gel method and one-step pyrolysis. Benefiting from the strong interfacial adhesion between the Si/SiOx nanoparticles and KF, the Si/SiOx nanoparticles are well embedded into the nitrogen-doped carbon layers after carbonization. Moreover, the SiOx buffer layers can effectively alleviate the volume change of Si during the cycling process. As an anode material for LIBs, the Si/SiOx/N–C composite exhibits an outstanding cycling performance (952 mA h g−1 after 100th cycles at 200 mA g−1) and a high capacity retention ratio (91.7%). These results suggest that this superior anode material synthesized by a simple and scalable method has potential application in LIBs.