Geochemical evaluation of Belayim Marine Oil Field using TOC and Rock Eval Pyrolysis investigations for a total of 19 cutting samples (9 samples covering (Nubia-B Formation) from well BM-57, and 10 samples covering (Nubia-A, B Formations) from well BM-65) was performed. Furthermore, geochemistry analyses of two crude oil samples from Wells BM-29 and BM-70, which are recovered from the Upper Rudeis Formation were performed. The BM-70 oil sample is recovered by Drill Steam Testing, while the BM-29 oil sample is taken from the flow output. Moreover, the oil samples were subjected to GC/GC-MS analysis (Biomarker) by StratoChem Company.In general, TOC analyses showed that the Nubia-A and B formation sediments are fairly immature compared to good source rocks with very high Hydrogen Index indicative of kerogen type II. The geochemical investigations of two oil samples indicate that the Upper Rudeis oil of Belayim Marine was derived from a marine carbonate rich source, which is relatively rich in algal organic matter and has moderate sulfur content. The maturity of the analyzed oils (about 0.75% R0) falls short from the stage of peak hydrocarbon generation which is known to be reached at about 0.85% R0
8 March 2016 in Egyptian Journal of Basic and Applied Sciences
Early kick detection is of great concern while drilling wells. The late kick detection can lead to uncontrolled blowout which increases the possibility of injury and potential lose of life and equipment. Causes of kick and the importance of early kick detection are introduced. Kick detection from mud logging real time data and kick detection in the offshore Nile Delta are discussed. Limitation of the conventional well control procedure in low permeable formation is introduced. A comparison between gas parameters warning sign and drilling parameters warning sign was carried out. A new advanced early kick detection method is proposed based on more than 10 years of experience in monitoring real time mud logging data while drilling and analyzing flow and kick reports. The proposed advanced early kick detection method uses additional accurate flow check using trip tank and recommends adding two additional accurate pressure sensors while shut-in well. The proposed method has a great advantage using gas parameters which can detect near-balance state before kick occur. The advanced kick detection method does not require any rig equipment modification nor interfere with any drilling operation. Case studies in the offshore Nile Delta wells illustrate the limitation of the conventional well control procedure and the advantage of the proposed method
Summary: Asphaltene is a solid oil component with a wide range of molecular compositions and structures, making it one of oil’s most complicated components. The deposition and precipitation of asphaltene in several places along the oil production line, such as the wellbore, reservoir, flow lines, tubing, and the separation unit at the surface, of the most prevalent flow assurance challenges. Changes in pressure, composition, and temperature cause asphaltene to precipitate out of the oil continuum. Variations in operation condition are caused by various recovery processes (gas injection, natural depletion, and chemical injection) in addition to the creation and blending of various oils during transportation. This paper presents a complete review of asphaltene precipitation (AP) and deposition (AD), which in turn helps in understanding the governing mechanisms and thermodynamic behaviors in this field. This study consists of several stages: analyzing the current state of asphaltene research (asphaltene characteristics, chemical nature, molecular structure, asphaltene crude oil phase behavior, solubility factors, and other factors); describing the phases of asphaltene (from its stability through its deposition in the reservoir pores, facilities, wellbore path in addition to the reasons for their occurrence); clarifying the rheology and asphaltene flow behavior in the reservoir; and finally examining the advantages and disadvantages of most widely used strategies for determining onset AP. In addition, some measured Iraqi asphaltene data are demonstrated and analyzed. This work will contribute to better knowledge of asphaltene and will serve as a reference for future studies on how to properly investigate and simulate asphaltene.