İsmail Aykut KARAMANLI

Dr. İsmail Aykut KARAMANLI

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 April 2025 in International Journal of Mechanics and Materials in Design
Verified
Journal Article
Open access
PDF file
FÖFatih Öztürk
Fatih Öztürk
FHFatih Huzeyfe
Fatih Huzeyfe
İKİsmail Aykut KARAMANLI
İsmail Aykut KARAMANLI
Abdurrahim TEMİZAbdurrahim TEMİZ
Abdurrahim TEMİZ
Polymer lattice structures, also known as polymeric cellular structures or polymeric foams, are widely used in various applications because of their unique properties, such as low density, high strength-to-weight ratio, and exceptional energy absorption. The objective of this work is to thoroughly examine the compression mechanical properties of strut-based truss constructions. As part of the study, these structures were created using an MSLA 3D printer, and both empirical and computational studies were conducted. Furthermore, the Taguchi method was employed for optimization purposes, and a thorough examination of statistical analyses was conducted. Lattice structures were developed using the SpaceClaim program and produced using the Ancubic M3 MSLA technology, which employs additive manufacturing. The LS-Dyna module of ANSYS Workbench was employed to create the finite element model of the lattice structures, and the manufactured specimens were subjected to compression experiments under the same conditions. The novelty of this work lies in generating MSLA 3D printer strut-based truss structures using both experimental and numerical analysis. Results show that increasing the cell counts also increases the compressive strength and absorbed energy. Similarly, struts and additional supports, which act synergistically, reduce stress concentration and improve stress distribution. Hence, compressive strength and absorbed energy increase. While structures consisting of pyramidical cells can be preferred in constructions where construction weight is not a limiting factor, it is preferable to use regular lattice structures in constructions where construction weight is a limiting factor.

25 February 2025 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
İKİsmail Aykut KARAMANLI
İsmail Aykut KARAMANLI
Abdurrahim TEMİZAbdurrahim TEMİZ
Abdurrahim TEMİZ

29 March 2024 in International Journal of Metalcasting
Verified
Journal Article
Open access
PDF file
İKİsmail Aykut KARAMANLI
İsmail Aykut KARAMANLI
MGMustafa Sabri Gök
Mustafa Sabri Gök
YKYılmaz Küçük
Yılmaz Küçük
OUOkan Unal
Okan Unal
In this study, the wear performance of spheroidal graphite cast iron subjected to plasma nitriding at different temperatures and treatment durations was investigated. The plasma nitriding parameters were optimized by response surface methodology (RSM) due to the output performance. Plasma nitriding was applied at three different temperatures (400, 450, 500 °C) and three different heat treatment durations (0.5, 2, 4 h). Wear tests were performed by ball-on-disk method for 60 minutes and for three different wear loads (10, 20, 30 N). The specimens were investigated for hardness, microstructure and wear performance. The RSM model was then created by using the wear resistance features. Plasma nitriding showed better wear performance than the untreated specimen for all treatment conditions. Hardness, nitrided layer thickness and wear performance remarkably improved with increasing temperature and process duration. The parameter that affects volume loss the most is wear load with 70.66% according to RSM modeling results. The most effective parameter in the wear rate change was found to be treatment duration at 42.85%. The model was able to predict the results with an error of 2.11% for volume loss and 9.14% for wear rate. The prediction results are very close to the experimental results. This clearly shows that the model can be used to determine the plasma nitriding parameters.

16 January 2026 in Polymers
Verified
Journal Article
Open access
PDF file
İKİsmail Aykut KARAMANLI
İsmail Aykut KARAMANLI
Triply Periodic Minimal Surface (TPMS) structures, with their zero average curvature, excellent energy absorption properties, high specific strength and high surface-to-volume ratio, could be used in a wide range of applications, such as the creation of lightweight and durable structures, grafts and implants. In this study, an internal TPMS structure inspiring trabecular bone and an external TPMS structure inspiring cortical bone were combined with infill density and topologically functionally graded to obtain hybrid structures. The aim of the study was to investigate the effects of functional grading on mechanical properties, energy absorption capacity and surface/volume (S/V) ratio and to determine the best combination. The novelty of the study is to obtain hybrid structures close to bone structures with a functional grading approach. The experimental design of the study was performed using the Design of Experiment (DoE) approach and the Taguchi method. Specimens were created according to the established experimental design and fabricated using a Masked Stereolithography (mSLA)-type 3D printer with bio-resin. The fabricated structures were subjected to compression tests; the results were examined in terms of deformation behavior, first peak, maximum force, energy absorption, specific energy absorption and S/V ratio. The optimal structures for defined input parameters were determined using signal-to-noise (S/N) ratios and ANOVA results. Deformations for diamond and primitive specimens began as shear band formation. Deformations for Neovius structures were mostly as brittle fracture. The highest first peak of 18.96 kN was obtained with the DN specimens, while the highest maximum force of 23.77 kN was obtained with the ND specimens. The best energy absorption property was also obtained with ND. The highest S/V ratio was 5.65 in the GP specimens. The statistical analyses were in accordance with the experimental results. Infill density increases decreased the S/V ratio while increasing all other parameters. This demonstrated the importance of mechanical-strength/porosity optimization for bone scaffold surrogate applications in this study.

20 December 2024 in Journal of Materials and Mechatronics: A
Verified
Journal Article
Open access
PDF file
İKİsmail Aykut KARAMANLI
İsmail Aykut KARAMANLI
KTKadircan Tahnal
Kadircan Tahnal
In this study, the changes in tensile strength of PLA and ABS specimens, the most commonly used materials in additive manufacturing with FFF, were investigated as a function of fill rate and print speed. Tensile specimens were fabricated for different fill rates and speeds and tensile tests were performed. Increasing the fill rate increases the tensile strength. Increasing or decreasing the print speed too much has a negative effect on tensile strength. Filament usage and printing times were also calculated. With the data obtained, an optimization model was created using response surface methodology. The aim of this study is to optimize the strength/cost of ABS and PLA, the two preferred FFF materials. The novelty of the study is to investigate the strength/cost optimization for different material types in terms of UTS, filament consumption and printing speed. For each material type, high tensile strength, low printing time and low filament used conditions were determined for the optimization model. The optimum parameters for PLA are obtained at 66.77% fill level and 78.43% speed rate. For ABS, optimum values are obtained at 79.5% fill rate and 135% speed rate. Then, samples were produced for optimum conditions and experiments and calculations were repeated. The numerical results obtained with the model were compared with the experimental results. It is found that the model estimates the output parameters with high accuracy. This proves the accuracy of the proposed optimization model.

30 December 2025 in İmalat Teknolojileri ve Uygulamaları
Verified
Journal Article
Closed access
İKİsmail Aykut KARAMANLI
İsmail Aykut KARAMANLI
VNVAHAP NECCAROĞLU
VAHAP NECCAROĞLU
Fused Filament Fabrication (FFF), one of the most widely used additive manufacturing methods, is of critical importance in structural applications requiring lightweight, strength, and design flexibility, especially with carbon fiber-reinforced polylactic acid (PLA-CF) composites. This study investigates the effects of infill density (30–70–100%), raster angle (0°–22.5°–45°), and build orientation (0°–45°–90°) on the flexural strength and hardness of PLA-CF samples using a Box-Behnken design. Response Surface Methodology (RSM) and Analysis of Variance (ANOVA) were applied to develop predictive models and evaluate parameter interactions quantitatively. Among the parameters, infill density had the most pronounced effect, contributing 73.29% to the variation in flexural strength. Optimal performance was achieved with 100% infill density, a raster angle of 31.36°, and a build orientation of 0°. The developed models demonstrated high accuracy with R² values of 97.19% for flexural strength and 99.57% for hardness. Validation experiments revealed deviations of 10.63% (flexural strength) and 9.20% (hardness) from model predictions, confirming the robustness of the statistical models. The novelty of this work lies in systematically demonstrating the influence of different printing variations on the mechanical performance of PLA-CF composites and defining the optimum printing parameters through a combination of experimental and statistical approaches. These findings provide comprehensive research for the reliable use of PLA-CF composites in load-bearing structural applications.