Researchers have proposed various models for assessing design alternatives for process plant retrofits. Due to the considerable engineering effort involved, no such models exist for the great majority of brownfield process plants, which have been in operation for years or decades. This article proposes a semi-automatic methodology for generating a digital twin of a brownfield plant. The methodology consists of: (1) extracting information from piping and instrumentation diagrams, (2) converting the information to a graph format, (3) applying graph algorithms to preprocess the graph, (4) generating a simulation model from the graph, (5) performing manual expert editing of the generated model, (6) configuring the calculations done by simulation model elements and (7) parameterizing the simulation model according to recent process measurements in order to obtain a digital twin. Since previous work exists for steps (1–2), this article focuses on defining the methodology for (3–5) and demonstrating it on a laboratory process. A discussion is provided for (6–7). The result of the case study was that only few manual edits needed to be made to the automatically generated simulation model. The paper is concluded with an assessment of open issues and topics of further research for this 7-step methodology.
Ongoing standardization in Industry 4.0 supports tool vendor neutral representations of Piping and Instrumentation diagrams as well as 3D pipe routing. However, a complete digital plant model requires combining these two representations. 3D pipe routing information is essential for building any accurate first-principles process simulation model. Piping and instrumentation diagrams are the primary source for control loops. In order to automatically integrate these information sources to a unified digital plant model, it is necessary to develop algorithms for identifying corresponding elements such as tanks and pumps from piping and instrumentation diagrams and 3D CAD models. One approach is to raise these two information sources to a common level of abstraction and to match them at this level of abstraction. Graph matching is a potential technique for this purpose. This article focuses on automatic generation of the graphs as a prerequisite to graph matching. Algorithms for this purpose are proposed and validated with a case study. The paper concludes with a discussion of further research needed to reprocess the generated graphs in order to enable effective matching.
Digital twins are now one of the top trends in Industry 4.0, and many companies are using them to increase their level of digitalization, and, as a result, their productivity and reliability. However, the development of digital twins is difficult, expensive, and time consuming. This article proposes a semi-automated methodology to generate digital twins for process plants by extracting process data from engineering documents using text and image processing techniques. The extracted information is used to build an intermediate graph model, which serves as a starting point for generating a model in a simulation software. The translation of a graph-based model into a simulation software environment necessitates the use of simulator-specific mapping rules. This paper describes an approach for generating a digital twin based on a steady state simulation model, using a Piping and Instrumentation Diagram (P&ID) as the main source of information. The steady state modeling paradigm is especially suitable for use cases involving retrofits for an operational process plant, also known as a brownfield plant. A methodology and toolchain is proposed, consisting of manual, semi-automated and fully automated steps. A pilot scale brownfield fiber processing plant was used as a case study to demonstrate our proposed methodology and toolchain, and to identify and address issues that may not occur in laboratory scale case studies. The article concludes with an evaluation of unresolved concerns and future research topics for the automated development of a digital twin for a brownfield process system.
Using digital twins, physical manufacturing objects can be virtualized and represented as digital models which are seamlessly integrated in both the physical and the digital space. This allows to simulate, verify and optimize production systems, from the logistical aspects to the manufacturing process and the involved components. A key challenge, in this area, is how to describe digital twins in complex manufacturing systems such that all physical details, processes, and verification needs are modeled at an appropriate and efficient abstraction level, e.g., modeling and detecting divers faults in production processes. To address this challenge, in this paper we present our work on modeling digital twins of manufacturing facilities using UML. UML class diagrams are used to describe static dependencies between entities, as well as to monitor and analyze the dynamic verification and quality aspects of manufacturing such as fault detection and consistency checks. Utilizing the key relevant features of UML in our approach, the designed class diagrams are used and enriched with behavioral models serving as digital twins which can be updated by live data from the manufacturing plant. We present a small example based on simulation programs and a demonstrator. The presented modeling approach and example provide useful insights to UML-based design of digital twins in complex manufacturing systems.
The automatic generation of digital twins of industrial processes requires the integration of several sources of information. If the twin is expected to accurately capture thermo-hydraulic phenomena, dimensions of tanks and other process components as well as detailed pipe routing information is relevant. Such information is not comprehensively captured in P&IDs (Piping & Instrumentation Diagrams), but it is available from 3D CAD models. However, information about control loops is not available from 3D CAD models, but is available from P&IDs. Previous research has demonstrated the extraction of such information from machine-readable P&IDs and 3D CAD models and converting this information to graphs. Further research is expected on applying graph matching methods for integrating these separate graphs to a common graph-based data structure that captures all of the desired information. This common model could support further work to develop digital twins. A major obstacle to this is that the graphs that have currently been generated from P&IDs and 3D CAD models are at very different abstraction levels, so graph matching methods are not feasible. This article address this obstacle by building on previous work, in which graphs were generated from P&IDs and 3D CAD models. The contribution of this paper is several novel algorithms for preprocessing a 3D CAD generated graph, until it is at the same level of abstraction as a P&ID generated graph of the same industrial process. The algorithms are demonstrated in the context of a laboratory process.
How to visualize recorded production data in Virtual Reality? How to use state of the art Augmented Reality displays that can show robot data? This paper introduces an opensource ICT framework approach for combining Unity-based Mixed Reality applications with robotic production equipment using ROS Industrial. This publication gives details on the implementation and demonstrates the use as a data analysis tool in the context of scientific exchange within the area of Mixed Reality enabled human-robot co-production.