Researchers have proposed various models for assessing design alternatives for process plant retrofits. Due to the considerable engineering effort involved, no such models exist for the great majority of brownfield process plants, which have been in operation for years or decades. This article proposes a semi-automatic methodology for generating a digital twin of a brownfield plant. The methodology consists of: (1) extracting information from piping and instrumentation diagrams, (2) converting the information to a graph format, (3) applying graph algorithms to preprocess the graph, (4) generating a simulation model from the graph, (5) performing manual expert editing of the generated model, (6) configuring the calculations done by simulation model elements and (7) parameterizing the simulation model according to recent process measurements in order to obtain a digital twin. Since previous work exists for steps (1–2), this article focuses on defining the methodology for (3–5) and demonstrating it on a laboratory process. A discussion is provided for (6–7). The result of the case study was that only few manual edits needed to be made to the automatically generated simulation model. The paper is concluded with an assessment of open issues and topics of further research for this 7-step methodology.
Water reuse from wastewater treatment plants can significantly reduce freshwater demand. Additionally municipal sewage and some industrial wastewaters could be used as sources of nutrients and carbon more effectively than they are used today. Biological treatments have attracted the most attention in wastewater purification, whereas, so far, only a little attention has been paid to the physico-chemical technologies. These technologies could, however, have great potential to recover nutrients when purifying wastewater. In this study, the main emphasis was to study the possibilities to utilize existing physico-chemical unit operations for wastewater purification and nutrients as well as carbon recovery. Unit operations were selected so that they could produce exploitable circular economy products from wastewaters and be assembled in a mobile container for carrying out recovery anywhere that is suitable. The results showed that in a mobile container, solids could be successfully separated from the studied wastewaters by flocculation-assisted solid/liquid separation and then processed into hydrochar by hydrothermal carbonization. Phosphate was precipitated using lime milk as calcium phosphate, and ammonium nitrogen was captured from the wastewater using membrane contactor technology resulting in ammonium sulphate for fertilizer use. Additionally, reverse osmosis retained residual impurities well, producing good quality water for reuse. The techno-economic feasibility seems promising.
Foam forming technology has attracted much attention during the past few years in the paper industry. Its advantages compared to conventional water forming are a new product portfolio and increased process efficiency. To support the paper industry in pushing foam forming technology forward, process simulation is needed to provide supporting data for strategic decision-making and as a basis for equipment dimensioning. This study examined the conversion of an existing wallpaper machine from water to foam forming technology using process simulation. To determine the required process configuration and parameter changes in the existing process, both published and unpublished data on the foam forming process were collected. This paper also describes modeling of the foam phase in the selected simulation software. The suitability of existing paper process equipment for foam was analyzed. Simulations revealed that undisturbed operation with foam requires some equipment modifications and re-arrangements in water circuits. With foam forming, the water balance in both short and long circulation changes remarkably compared to conventional water forming, leading to a large increase in the long circulation volume flows.