Reinforced Concrete (RC) buildings with masonry infills are a very common structural typology worldwide for civil, strategic, or productive use. Damage to infills may cause danger for human lives and strongly affects economic losses, as shown during past earthquakes. In the current literature, different approaches are available for modeling the in-plane response of infilled frames and different constitutive laws generally calibrated on experimental tests. On the contrary, few and recent studies proposed formulas that account for the main properties of infills influencing their in-plane behavior to lateral forces. This paper presents a study finalized to derive a reliable model that is able to predict the monotonic and cyclic response of RC infilled masonry frames. To this end, after a critical analysis of the available literature, the authors combine among them two models, one for the monotonic response and the other for the cyclic one, by showing their reliability with reference to different experimental cases. Then, at the end of the paper, the derived models are employed to assess the seismic vulnerability of infills throughout a proposed procedure based on the common pushover analysis approach.

Masonry-Infilled Reinforced Concrete Frames are a very widespread structural typology all over the world for civil, strategic or productive uses. The damages due to these masonry panels can be life threatening to humans and can severely impact economic losses, as shown during past earthquakes. In fact, during a seismic event, most victims are caused by the collapse of buildings or due to nonstructural elements. The damage caused by an earthquake on nonstructural elements, i.e., those not belonging to the actual structural body of the building, is important for the purposes of a more general description of the effects and, of course, for economic estimates. In fact, after an earthquake, albeit of a low entity, it is very frequent to find even widespread damages of nonstructural elements causing major inconveniences even if the primary structure has reported minor damages. In recent years, many territories have been hit worldwide by strong seismic sequences, which caused widespread damages to the nonstructural elements and in particular to the masonry internal partitions and the masonry infill panels of the buildings in reinforced concrete, with damage to the floor and out-of-plane expulsions/collapses of single layers. Unfortunately, these critical issues have arisen not only in historic, but also in recent buildings with reinforced concrete, in many cases exhibiting inadequate seismic behavior, only partly attributable to the intrinsic vulnerability of the masonry panels against seismic actions. Such problems are due to the following aspects: lack of attention to construction details in the realization of the construction, use of poor-quality materials, and above all lack of design tools for the infill masonry walls. In 2018, regarding the design of nonstructural elements, the formulation of floor spectra has been recently introduced in Italy. This entry article wants to focus on all these aspects, describing the state of the art, the literature studies and the design problems to be solved.