The present paper shows and discusses some of the results obtained within an experimental investigation carried out on 15 reinforced concrete (RC) beams strengthened in shear by externally bonded fiber-reinforced plastics (FRP) sheets. The aim of the study is to analyze the influence that the geometrical percentage of transverse steel reinforcement could have on the FRP resisting action. In particular, the objectives of the experimental campaign are to explore the possible interaction between FRP and steel transverse reinforcement resisting actions, analyzing the deformation behavior of the shear resisting system (FRP, transverse steel, and concrete) and the modes of failure of the strengthened and not strengthened beams. The results of the tests in terms of shear capacity are compared to the design formulations provided by the American Concrete Institute and the National Research Council of Italy code-format recommendations.

The aim of the present paper is the development of a simple procedure for the analysis of the bond behavior of fiber-reinforced polymer (FRP) sheets or plates externally applied to masonry supports for the strengthening or repair of masonry constructions. The procedure allows evaluation of the bond strength and the fracture energy developed during the debonding process through simple formulas based on a few parameters, evaluated either by standard tests performed on the materials making up the support and the strengthening system or by theoretical considerations. A brief discussion on the main experimental evidence and the theoretical models provided by the literature is also reported in this paper. The comparison between the theoretical results obtained by applying the proposed procedure and the experimental data deduced from literature is carried out.