Underground Built Heritage (UBH) stands out among the existing Cultural Heritage sites as a peculiar scenario. The assets belonging to this type of heritage are typically difficult to manage, exploit, and promote because of a lack of knowledge and documentation. The challenges in documenting built heritage are many and wide-ranging, and the main need must be to provide an accurate and appropriate representation of the surveyed area and its geometric features without employing time-consuming processes. Mobile Mapping Systems (MMSs) are nowadays trending technologies for the geomatics community, proving to be a useful alternative to traditional surveying techniques when taking time and cost constraints into account. The paper focuses on the use of an MMS, the STONEX® X120GOSLAM Laser Scanner system, in documenting a portion of the Castello del Valentino, an articulated and complex architecture located in Turin (Italy). The underground floor of the castle, due to its complexity in terms of accessibility and the challenge it poses for the documentation approach, was chosen as a case study to assess the STONEX® X120GO's capabilities in terms of portability of the instrument, speed of acquisition, as well as completeness and accuracy of the acquired dataset. The results obtained using the MMS technique have been compared to and validated using data from a TLS (Terrestrial Laser Scanner) survey used as a ground reference. The results and considerations reported in this paper demonstrate that MMSs can accurately and completely depict built spaces and their main characteristics and have substantial potential in mapping complex assets.
This research proposes a detailed analysis of the potential of MMS (Mobile Mapping Systems), supported by SLAM (Simultaneous Localisation And Mapping) algorithms, performed on a multiscale test field in order to make a concrete contribution to the morphological study of cities. These systems, developed with the aim of acquiring a large number of points in a short time, are able to map the surrounding area and automatically localise themselves in real time in relation to a determined reference system. The analysed area, located in Venice, was divided into three different test fields characterised by typical elements potentially comparable to those of other urban realities. The data were acquired using the LiBackPack C50, Kaarta Stencil and Heron Lite systems and compared quantitatively and qualitatively with data obtained from more traditional surveying techniques. Specifically, the data obtained from TLS (Terrestrial Laser Scanning) surveys, supported by topographic measurements, were the most accurate basis on which to evaluate the accuracy and completeness of the three different MMS devices. The standard deviation values were initially analysed in the final 3D global models using the C2C (Cloud to Cloud) and C2M (Cloud to Mesh) distance calculation methods. Subsequently, the geometric differences were investigated through the extraction of horizontal profiles, and two more specific 2D analyses were carried out: the first inspecting the residual parameters calculated after the Helmert transformation from two sets of control points obtained from the profiles, followed by a local strain analysis. The study of the local deformation parameters allowed us to validate the results obtained and to identify the real limits of these survey instruments. The aim was to make a concrete contribution to the formalisation of an operative protocol for the morphological study of the city, exploiting the potential of these technologies to overcome the differences in scale and the gap between outdoor and indoor spaces.
10 May 2024 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
In the framework of mapping underwater environments, Posidonia Oceanica (PO) is a fundamental indicator for environmental monitoring and related studies and analyses for climate change. The POSEIDON project aims to study, develop and test new methodologies to provide knowledge, as well as ultra-high-resolution (UHR) and beyond ultra-high-resolution (BUHR) mapping and monitoring data for the conservation of the PO and related meadows and banquettes in the Mediterranean area. The project is funded by the National Recovery and Resilience Plan and stems from the recommendation of international organizations (European Environmental Directives, Mediterranean PO Network, International Partnership for Blue Carbon, Intergovernmental Oceanographic Commission of UNESCO in the Save the Wave project). Starting from new integrated survey methods and legacy data, the PO, ichthyofauna and seagrass banquettes will be mapped to understand their evolution and extract indicators and useful trends. Furthermore, the produced information will be stored and shared in a webGIS and a dedicated app to prevent unexpected damages during sailing or other activities. POSEIDON will use imaging sensors (RGB and multi/hyperspectral cameras) to extract information. With specific lighting equipment for significant water depths, these sensors will be conducted (by scuba divers or Autonomous Underwater Vehicles) next to the object to acquire BUHR data. Finally, to monitor the fauna (fish, other species, invertebrates), terrestrial and underwater videogrammetry will be applied using mono and stereo-cameras with object detection algorithms.
11 June 2024 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Photogrammetry and LiDAR have become increasingly accessible methods for documentation of Cultural Heritage sites. Academic and government agencies recognize the utility of high-resolution 3D models supporting long-term asset management through visualization, conservation planning, and change detection. Though detailed models can be created with increasing ease, their potential for future use can be constrained by a lack of accompanying topographic data, data collector skill level, and incomplete recording of the key metadata and paradata which make such survey data useful to future endeavors. In this paper, informed by various international survey organizations and data archives, we present a framework to record and communicate Cultural Heritage - focusing on architectures based on 3D metric survey - to first describe the data and metadata which should be included by surveyors to enable data usage and to communicate the expected utility of this data.
26 June 2023 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
3D documentation of the Underground Built Heritage (UBH) is always fundamental for knowledge, management, conservation, and enhancement of cultural heritage, but the challenges involved in documenting this kind of site are many and various, With the aim of providing an accurate and reliable representation of the surveyed area without employing time-consuming processes, Mobile Mapping Systems (MMSs) based on SLAM (Simultaneous Localization And Mapping) technology have now the potential to overcome these challenges, proving to be a useful alternative to traditional surveying techniques. The underground site of Grotta Zinzulusa in Castro (LE), Italy, is an anchialine cave system difficult to access and document due to its narrow passages, large rooms, and poor illumination. Within this case study, the effectiveness of using an MMS approach, employing the STONEX® X120GOSLAM Laser Scanner system, to document the cave system and integrates the data with those obtained from other traditional geomatics techniques, such as UAS (Uncrewed Aerial System) and TLS (Terrestrial Laser Scanning) surveys, has been proved. The study aims to define the best practices and operational methodologies for enhancing the speediness, usability, and cost-effectiveness of using MMSs in underground settings for 3D documentation of heritage sites to provide metrically correct and accurate products for researchers, scientists, and the wider public.
4 October 2025 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Underwater photogrammetry presents unique challenges, including light attenuation, refraction, and turbidity, that affect the accuracy and quality of 3D reconstructions. This study investigates the performance of novel neural rendering techniques, Neural Radiance Fields (NeRF), SeaThru-NeRF, and 3D Gaussian Splatting (3DGS), in comparison to conventional Structure-from-Motion (SfM) workflows. Using a dataset acquired during the SIFET benchmark campaign on a submerged Roman archaeological site, we processed image data via Nerfacto, SeaThru, and Jawset Postshot (3DGS) and compared outputs against a reference model produced in Agisoft Metashape. Evaluation criteria included processing time, geometric accuracy (via M3C2 analysis), point cloud density and roughness, and point cloud completeness. Results show that radiance fields-based methods significantly reduce processing time while providing competitive visual results. SeaThru-NeRF demonstrated the highest geometric accuracy, benefiting from underwater-specific corrections, while 3DGS offered photorealistic rendering. These findings highlight the potential of neural methods for underwater cultural heritage documentation, though further improvements are needed in data fidelity and robustness under challenging underwater conditions.