The physician-modified endograft technique is becoming widely accepted as an alternative to standard fenestrated endovascular aortic repair. We report a streamlined workflow based on a bifurcation endograft, using the punch card and the Hungaroring reinforcement, two novel additions to the armamentarium that might contribute to the safety and durability of such repairs. A cohort of 11 patients was treated with 43 vessels incorporated. The clinical success rate was 100%. No major adverse event or death was recorded at 30 days. The punch card and the novel reinforcement technique might improve the safety and durability of such repairs.
12 January 2026 in Journal of Endovascular Therapy
Objective: Three-dimensional models are increasingly used to facilitate the positioning of fenestrations on a physician-modified endograft (PMEG) during the fenestrated endovascular aortic repair (FEVAR) of complex abdominal aortic aneurysms (CAAA). The punch card technique was developed to eliminate the 3D printing workflow while preserving the benefits of having a 3D model. The objective of the current study is to evaluate the performance of the purpose-built software EndoDraft compared to manual punch card design. Methods: An experimental study was performed to compare software-assisted and manual punch card creation. Fenestration data of readily available procedural plans were used for patients who underwent elective FEVAR for CAAA from May 2023 to September 2024. Time needed to complete punch card planning was recorded as well as inaccuracies of the manual technique were evaluated by measuring the vertical and circumferential position of the fenestrations on the punch card. Results: A total of 76 punch cards and 288 fenestrations were made based on 38 patients’ fenestration data. Preparation time was 233.0 ± 40.3 seconds for the manual group, whereas 63.2 ± 21.5 seconds for the software-aided group (p<0.001). Longitudinal imprecision of the manual punch card was 0.8 ± 0.6 mm for the celiac axis (CA), 1.0 ± 0.6 mm for the superior mesenteric artery (SMA), 0.8 ± 0.5 mm for the right renal artery (RRen), whereas 1.0 ± 0.6 mm for the left renal artery (LRen). Circumferential errors of the same fenestrations were 0.4 ± 0.4 mm for the CA, 0.4 ± 0.4 mm for the SMA, 0.6 ± 0.5 mm for the RRen, and 0.5 ± 0.4 mm for the LRen. No significant difference between the completion time recorded at the beginning and at the end of the software’s learning curve was detected (77.8 ± 29.4 s vs 55.8 ± 18.5 s, p=0.15). Conclusions: The software-assisted design of the punch card is associated with higher precision and a vast improvement in speed compared to the manual technique during PMEG planning for the endovascular treatment of CAAAs. The purpose-built EndoDraft tool was made freely available in an online repository offering a more streamlined workflow. Clinical Impact: EndoDraft® could meaningfully streamline the PMEG-FEVAR workflow by replacing manual punch-card drafting with rapid, software-generated, proportionally scaled templates that are produced in about one minute rather than several minutes, while reducing the small but measurable positioning errors inherent to hand drawing. For clinicians, this means a more reproducible planning step, less cognitive load and “ruler time” during preparation, and a workflow that is easier to standardize across operators with a short learning curve. The key innovation is purpose-built automation with integrated 2D/virtual 3D visualization and direct PDF output, made freely available to support wider adoption.
Background/Objectives: We sought to demonstrate the versatility and economy of physician-modified endograft (PMEG) fenestrated endovascular aortic repair (FEVAR) based on the Treo (Terumo Aortic) platform for patients referred for custom-made device (CMD) FEVAR due to a complex abdominal aortic aneurysm (CAAA). Endovascular planning was performed utilizing a standardized design incorporating all visceral arteries with a low supra-celiac landing zone. The pure cost of the aortic components was compared between the PMEG and CMD designs. Methods: A total of 39 consecutive patients treated with CMD FEVAR due to a CAAA between September 2018 and December 2023 were recruited at a tertiary vascular center for a retrospective evaluation. Endovascular planning was performed on readily available computed tomography angiography (CTA) datasets using 3Mensio Vascular (Pie Medical Imaging) software. The actual cost of the major components was compared between the implanted CMD platform produced by Cook and the planned Treo-based PMEG repair. Results: A total of 155 fenestrations were planned on 3 triple-, 34 quadruple-, and two quintuple-fenestrated devices. The 90 mm distance between the proximal edge and the flow divider of the 120 mm long main body of the Treo graft allowed for the placement of all necessary fenestrations of the target arteries without the need to reduce the 3 cm supra-celiac landing zone while also preserving a safety distance of >1 cm to the flow divider. The costs of the components were EUR 33896 for CMD and EUR 8878 for a PMEG. Conclusions: This retrospective study suggests that a quadruple-fenestrated PMEG based on the Treo bifurcation is a highly versatile alternative with a significant price advantage over custom-made devices for the treatment of complex abdominal aortic aneurysms.
Longitudinal mapping of the superficial peripheral vascular network is clinically relevant for conditions such as venous insufficiency, superficial venous thrombosis, and localized hemorrhagic injury; yet existing modalities are either operator-dependent, costly, or unable to provide wide-field coverage. We designed and demonstrated the feasibility of a relatively quick, cost-effective, automated panoramic near-infrared (NIR) imaging system operating at 850 nm, with a total acquisition time of 30 s. The prototype integrates a motorized rotational acquisition frame, co-localized illumination, lateral mirror enhancement, and a time-of-flight ranging sensor. A custom image processing pipeline combining contrast-limited adaptive histogram equalization (CLAHE), black-hat morphological filtering, Otsu binarization, structure-tensor-based diameter quantification, and photogrammetric 3D reconstruction was applied to data from five healthy volunteers. Optimal acquisition parameters (30 ms exposure, analog gain 3.5) were identified via systematic characterization. The pipeline reliably isolated venous structures of the 35 cm field of view, yielding a mean superficial vein diameter of 2.69 ± 1.48 mm, consistent with published anatomical references. A panoramic texture-mapped 3D surface reconstruction of the limb was generated for each participant. The system provides a rapid, operator-independent panoramic view of superficial veins suitable for future longitudinal monitoring, offering a compelling complementary tool to duplex ultrasound for tracking morphological and volumetric vascular changes.