BIJUKUMAR B

Dr. BIJUKUMAR B

Electrical and Electronics, National Institute of Technology Puducherry, Puducherry, India
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2018 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
BIJUKUMAR BBIJUKUMAR B
BIJUKUMAR B
ARA. G. Kaushik Raam
A. G. Kaushik Raam
SGSaravana Ilango Ganesan
Saravana Ilango Ganesan
CNChilakapati Nagamani
Chilakapati Nagamani
This paper presents a new Maximum Power Point Tracking (MPPT) technique for extracting the maximum power in Thermoelectric Generator (TEG) systems. Considering the linear nature of I-V characteristics of a TEG source, the proposed technique is based on the linear extrapolation principle. The I-V co-ordinates of two random operating points are used in computing the co-ordinates of new MPP. As anticipated, the proposed method involves only three sampling periods to reach the MPP under any dynamic conditions. The Linear Extrapolation based MPPT (LEMPPT) technique has several advantages such as simplicity of analysis, fixed and minimal convergence time, ease of implementation and a high tracking efficiency due to the absence of steady-state oscillations. Further, there is no need to interrupt the circuit for measuring the open-circuit voltage of TEG. Also, there is no requirement for additional switches or components. The simulation and test results show that the proposed algorithm has a superior performance as compared to that of the Perturb and Observe (P&O) algorithm.

1 May 2018 in IET Generation, Transmission & Distribution
Verified
Journal Article
Open access
PDF file
BIJUKUMAR BBIJUKUMAR B
BIJUKUMAR B
ARArunadevi Ganesan Kaushik Raam
Arunadevi Ganesan Kaushik Raam
SGSaravana Ilango Ganesan
Saravana Ilango Ganesan
CNChilakapati Nagamani
Chilakapati Nagamani
MRM Jaya Bharata Reddy
M Jaya Bharata Reddy
In this study, a maximum power point tracking (MPPT) technique based on parabolic extrapolation has been presented for thermoelectric generator systems. Conventional MPPT methods require a closed‐loop controller and perturb and observe (P&O) method to provide fast‐tracking response. However, they produce power loss due to small oscillations in the steady state. The proposed method excludes the use of closed‐loop controller and steady‐state oscillations by directly estimating the coordinates of MPP using three random operating points on the parabolic P–I curve. To substantiate the effectiveness of the parabolic extrapolation‐based MPPT algorithm, different conditions of temperature gradient and load have been applied. The results demonstrate that the proposed algorithm takes <15% of the time taken by P&O method to track the MPP.

26 June 2023 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
BIJUKUMAR BBIJUKUMAR B
BIJUKUMAR B
MCManickam Chakkarapani
Manickam Chakkarapani
SGSaravana Ilango Ganesan
Saravana Ilango Ganesan
Most of the research studies have reported that series connection of thermoelectric modules (TEMs) performs better under non-uniform temperature distribution (NTD) conditions. However, connecting all the system's modules in series is not a suitable configuration in industrial applications since when one TEM in an array fails, the performance of the entire series string is affected. It is, therefore apparent that industries demand parallel connections that need further research. This study investigates technical issues when connecting TEMs in parallel under NTD. The results show that there are reverse current flows through the thermoelectric generator (TEG) parallel strings when there is slight temperature mismatch between TEMs. This study reveals that blocking diodes are essential in TEG array configurations with parallel strings to protect the modules from reverse currents. Additionally, it has been found that temperature mismatch causes several maximum power points (MPPs) on the power-voltage curve of TEG because of the presence of blocking diodes. Subsequently, the critical value of temperature gradient ratios between mismatched modules is derived, below which multiple MPPs do not exist. This paper introduces a boundary condition which is suitable for real TEG systems with $n$ number of mismatched modules and is validated by simulation and test results.

13 December 2022 in Applied Thermal Engineering
Verified
Journal Article
Closed access
BIJUKUMAR BBIJUKUMAR B
BIJUKUMAR B
ARA.G. Kaushik Raam
A.G. Kaushik Raam
SVSukanya V.
Sukanya V.
NCNirmal Mukundan C.M.
Nirmal Mukundan C.M.
AAAhmed Al-Durra
Ahmed Al-Durra

20 June 2024 in Journal of Cleaner Production
Verified
Journal Article
Closed access
DYDalia Yousri
Dalia Yousri
SVSukanya V.
Sukanya V.
HFHany E.Z. Farag
Hany E.Z. Farag
BIJUKUMAR BBIJUKUMAR B
BIJUKUMAR B
Ehab El-SaadanyEhab El-Saadany
Ehab El-Saadany

22 October 2024 in Applied Energy
Verified
Journal Article
Closed access
DYDalia Yousri
Dalia Yousri
HFHany E.Z. Farag
Hany E.Z. Farag
SVSukanya V.
Sukanya V.
BIJUKUMAR BBIJUKUMAR B
BIJUKUMAR B
Ehab El-SaadanyEhab El-Saadany
Ehab El-Saadany