Bruno Alderete

Dr. Bruno Alderete

Chair of Functional Materials, Saarland University, Saarbrücken, Saarland, Germany
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 January 2021 in Advanced Engineering Materials
Verified
Journal Article
Open access
PDF file
Bruno AldereteBruno Alderete
Bruno Alderete
TMTimothy MacLucas
Timothy MacLucas
DEDouglas Espin
Douglas Espin
SBSonia P. Brühl
Sonia P. Brühl
FMFrank Mücklich
Frank Mücklich
Sebastian SuarezSebastian Suarez
Sebastian Suarez
Sucker rods are a key element in certain oil‐extraction processes as they link the motor group on the surface with the pumps located downhole. During the transport from the production site toward the extraction well, these components are prone to corrosion. A hydrophobic carbon nanotube (CNT) coating, deposited via electrophoretic deposition (EPD), is proposed as a protective layer, shielding the rods from harsh environmental conditions. Three different coating systems are considered and thoroughly characterized (depending on the additive that is used to deposit the CNT), namely, magnesium nitrate hexahydrate (Mg–Nit), triethylamine (TEA), and a duplex coating (DD). The latter presents an approach which combines the advantages of each additive, mechanical stability from Mg–Nit and strong hydrophobicity from TEA (near superhydrophobic). The former coatings are further processed to overcome their individual shortcomings, resulting in an increase in the coating's stability for TEA coating, as well as transforming the hydrophilic Mg–Nit surface into a hydrophobic surface.

24 August 2021 in MethodsX
Verified
Journal Article
Open access
Bruno AldereteBruno Alderete
Bruno Alderete
RPRafael Puyol
Rafael Puyol
SSSebastian Slawik
Sebastian Slawik
EEEric Espin
Eric Espin
FMFrank Mücklich
Frank Mücklich
Sebastian SuarezSebastian Suarez
Sebastian Suarez
Electrical contacts are pervasively found on countless modern devices and systems. It is imperative that connecting components present adequate electrical, mechanical, and chemical characteristics to fulfill the crucial role that they play in the system. To develop an electrical contact material that is tailored for a specific application, different approaches are pursued (e.g., coatings, reinforced composites, alloyed metals, duplex systems, etc.). The manufacturing of electrical contact materials demand a thorough characterization of their electrical properties, mechanical properties, and their resistance to wear, as well as their resistance to atmospheric conditions. Accordingly, commissioning of a novel setup enables a more comprehensive study of the materials that are developed. Therefore, a complete understanding of the material's electrical and tribological characteristics are attained, allowing the production of a material that is compliant with the particular demands of the application for which it is intended. This multipurpose setup was built with higher precision stages and higher accuracy 3-axis force sensor, thus providing the following improvement over the preceding setup: • Elevated load-bearing capacity (double), higher precision and stability. • Tribo-electrical characterization (implementation of scratch and fretting tests). • Environmental control (climate and external vibration).

19 January 2022 in Carbon Trends
Verified
Journal Article
Open access
Bruno AldereteBruno Alderete
Bruno Alderete
Frank MücklichFrank Mücklich
Frank Mücklich
Sebastian SuarezSebastian Suarez
Sebastian Suarez

Verified
Journal Article
Open access
PDF file
Bruno AldereteBruno Alderete
Bruno Alderete
Frank MücklichFrank Mücklich
Frank Mücklich
Sebastian SuarezSebastian Suarez
Sebastian Suarez
Carbon nanotube (CNT)-reinforced silver and copper metal matrix composites—at three different reinforcement phase concentrations (0.5 wt.%, 0.75 wt.%, and 1 wt.%)—were produced via powder metallurgy and sintered via hot uniaxial pressing. Optical and electron microscopy techniques were used to characterize the powder mixtures and sintered composites. The latter were also electrically characterized via load-dependent electrical contact resistance (ECR) and surface fatigue tests. Particle size and morphology play a crucial role in CNT deposition onto the metallic powder. CNT were deposited exceptionally well onto the dendritic copper powder regardless of its larger size (compared with the silver flakes) due to the higher surface area caused by the grooves and edges of the dendritic structures. The addition of CNT to the metallic matrices improved their electrical performance, in general outperforming the reference material. Higher CNT concentrations produced consistently low ECR values. In addition, high CNT concentrations (i.e., 1 wt.%) show exceptional contact repeatability due to the elastic restitutive properties of the CNT. The reproducibility of the contact surface was further evaluated by the fatigue tests, where the composites also showed lower ECR than the reference material, rapidly reaching steady-state ECR within the 20 fatigue cycles analyzed.

20 January 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
Bruno AldereteBruno Alderete
Bruno Alderete
FMFrank Mücklich
Frank Mücklich
Sebastian SuarezSebastian Suarez
Sebastian Suarez
Silver is ubiquitously used in electrical contacts due to its exceptional electrical conductivity. Although silver does not oxidize, given time it does sulfurize under atmospheric conditions forming silver sulfide. This tarnishing film is often the cause of an electrical contact’s malfunction or failure. In this research work we analyzed three alternate methods which could reduce the effect of the tarnishing film on the contact, therefore minimizing the chances of component malfunction. The alternatives analyzed included: puncturing through the tarnishing film, mechanical removal by scratch and fretting tests, and resistive heating removal by applying various currents. These methods were compared to chemically cleaned silver contacts used as reference. Careful analysis of the studied methods proved that normal loads above 5 N are enough to puncture the tarnishing film, thus reducing its effect on the contact material’s conductivity. Furthermore, although mechanical removal is not a viable option, it proves that the silver sulfide film does not significantly affect the conductivity of the system when piled-up (as is the case with tin oxide in tin plated contacts). Finally, the resistance of tarnished contacts is considerably higher than the chemically cleaned contacts for loads at or below 5 N (over one order of magnitude).

9 April 2023 in Tribology Letters
Verified
Journal Article
Open access
PDF file
Bruno AldereteBruno Alderete
Bruno Alderete
FMFrank Mücklich
Frank Mücklich
SSSebastian Suarez
Sebastian Suarez
Carbon nanotubes (CNT) are of great interest to the research community due to their outstanding mechanical, transport, and optical properties. These nanoparticles have also shown exceptional lubricating capabilities, which coupled with their electrical conductivity show promising results as solid lubricants in electrical contacts. In this study, three different CNT coatings were deposited over copper platelets via electrophoretic deposition and subsequently tribo-electrically characterized including electrical contact resistance evolution during fretting wear, wear protection, chemical analysis of fretting marks, as well as influence of CNT coating thickness, duration and normal load applied during fretting, and atmospheric humidity. Thicker CNT coatings show improved wear protection while retaining similar electrical behavior as uncoated copper, or even improving its electrical contact resistance. Moreover, the compaction of the porous CNT coating is crucial for optimal electrical performance at low humidity. For longer fretting tests (150,000 and 500,000 cycles), the coatings are displaced thus affecting the wear protection offered. However, the coatings stabilize and reduce ECR compared to uncoated samples. Furthermore, thicker CNT coatings can bear higher loads during fretting due to the increased lubricant reservoir, with carbonaceous tribofilm remaining at the contacting interface after 5,000 fretting cycles regardless of normal load. Graphical Abstract