During the construction of geotechnical engineering in cold regions, the stability of rock is inevitably affected by freeze-thaw cycles and hydrochemical corrosion. In order to study the effect of hydrochemical corrosion on dynamic mechanical properties of freeze-thaw rocks, dynamic compression tests were carried out on sandstone samples corroded by four different concentrations of HCl solutions with the same number of freeze-thaw cycles using split-Hopkinson pressure bar (SHPB) test system. The coupling effects of freeze-thaw cycles with different concentrations of HCl solutions and strain rate on mechanical properties of sandstones were explored. The results showed that strain rate could enhance the dynamic compressive strength and peak strain but had no significant effect on the elastic modulus. The coupling effect of freeze-thaw cycles and acid corrosion weakened the dynamic compressive strength, and elastic modulus but enhanced the peak strain. In addition, X-ray diffractometer (XRD) and scanning electron microscope (SEM) were used to analyze the changes of mineral composition and microstructure damage of sandstone samples under the coupling effect of acid corrosion and freeze-thaw cycles. The analysis results were basically consistent with the damage characteristics of macro mechanical properties. The research results can provide reference for open pit coal mining in cold regions.
In order to cope with climate change and achieve the goal of carbon neutrality, the use of carbonization technology to enhance the performance of cement-based materials and achieve the purpose of carbon sequestration has become a very promising research direction. This paper considers the use of CO2NBW as mixing water for cement-based materials, aiming to improve the carbonization efficiency of materials to achieve the goal of carbon neutrality. This time, the effect of CO2NBW on cementitious filling materials under different aggregate fractal dimensions was studied through uniaxial compression tests and acoustic emission technology. The effect of CO2NBW on the mechanical properties and crack evolution of the material was discussed. The results showed that CO2 nanobubbles significantly improved the strength of cemented filling materials under different fractal dimensions, and the uniaxial compressive strength was most significantly improved by 23.04% when the fractal dimension was 2.7824. In addition, the characteristics of acoustic emission ring counts and energy parameters indicate that CO2 nanobubbles help improve the overall pore structure of the sample, affecting the macroscopic strength. However, the addition of CO2 nanobubbles reduces the limit energy storage ratio of elastic strain energy, which indicates that excessive CO2 concentration may affect the hydration reaction of the cementing material.
20 September 2024 in Journal of Building Engineering