Lamb wave dispersion curves are useful for optimizing the inspection scanning distance that can be covered with good sensitivity in many current applications. However, one of the main problems concerning this calculation lies in selecting a numerical method that is computationally accurate and efficient. In this paper, Lamb waves dispersion curves are generated by the Scaled Boundary Finite Element Method, and by the Rayleigh–Lamb equation. For the semi-analytical case, waveguide cross-section discretization was performed using isoparametric elements and high-order spectral elements. The semi-analytical formulations lead to an eigenvalue problem that can be solved efficiently by calculating the couples of wavenumbers and frequencies that guarantee the wave mode propagation, the basis for generating the dispersion curves. These are compared with those obtained from the analytical solution for the symmetric and antisymmetric modes; in both cases, homogeneous plates of constant thickness are considered. The numerical results show good agreement when using a low number of isoparametric elements, or a single spectral element with shape functions of the order of six for computing the dispersion curves and wave structure. The calculation is given with low computational effort, and the relative variation with respect to the analytical reference values is less than 2%.
This research evaluates the effect of the variables of Phased Array Ultrasonic Testing (PAUT) on the sectoral angular beam scans "S-Scan" and the geometric morphology of planar discontinuities such as the inclination for the ultrasonic beam and the shape of the extremity on accuracy in measurements. The study was carried out in two stages. During the first stage, eight ASTM A36 steel samples with machined notches by penetration from EDM and a welded sample with lack of penetration in a butt weld were designed and produced. In the second stage, it was measured the size of the discontinuities using ultrasound inspection and different configurations of the phase arrangement. The effect of each variable and inspection setting with errors between 0.2 % and 120 % were determined by statistical analysis.
16 September 2025 in International Journal of Engineering Science
This article deals with the estimation of dispersion curves and wave structures for Lamb waves performed using the analytical scheme and Scaled Boundary Finite Element Method (SBFEM). In the SBFEM approach, the cross-sections of the waveguide are discretized by isoparametric elements. This formulation leads to an eigenvalue problem for the calculation of wavenumber-frequency couples, which can be efficiently solved. These results are compared with those analytical solutions obtained from the characteristic equations of Rayleigh-Lamb whose solutions describe the symmetric and antisymmetric modes for isotropic and constant cross-section plates. Both approaches are implemented in the Matlab environment. The results demonstrate that both approaches are effective in calculating the dispersion curves and wave structure, but for the SBFEM approach, an optimized number of isoparametric quadratic elements yield a comparable time with the analytical calculation. However, as the thickness increase, the computational effort also increases.
Se desarrolló e implementó un software didáctico para la asignatura Tratamientos Térmicos del programa de Ingeniería Metalúrgica, para enseñar la templabilidad de aceros: cálculo, selección y diseño de tratamiento térmico de temple. La herramienta se integró a un objeto virtual de aprendizaje OVA, permitiendo a los estudiantes aplicar conceptos mediante cálculos interactivos.