Lamb wave dispersion curves are useful for optimizing the inspection scanning distance that can be covered with good sensitivity in many current applications. However, one of the main problems concerning this calculation lies in selecting a numerical method that is computationally accurate and efficient. In this paper, Lamb waves dispersion curves are generated by the Scaled Boundary Finite Element Method, and by the Rayleigh–Lamb equation. For the semi-analytical case, waveguide cross-section discretization was performed using isoparametric elements and high-order spectral elements. The semi-analytical formulations lead to an eigenvalue problem that can be solved efficiently by calculating the couples of wavenumbers and frequencies that guarantee the wave mode propagation, the basis for generating the dispersion curves. These are compared with those obtained from the analytical solution for the symmetric and antisymmetric modes; in both cases, homogeneous plates of constant thickness are considered. The numerical results show good agreement when using a low number of isoparametric elements, or a single spectral element with shape functions of the order of six for computing the dispersion curves and wave structure. The calculation is given with low computational effort, and the relative variation with respect to the analytical reference values is less than 2%.
1
11 December 2023 in Environment, Development and Sustainability
This work aimed to use low-cost residual cocoa shell biomass for the preparation of activated carbon with different amounts of SiO2 nanoparticles using the coprecipitation method. The use of residual plant biomass seeks to strengthen the challenges of the bioeconomy in the generation of value-added products for the agro-industry. Subsequently, the adsorption capacity of phenol and 3,4-dimethoxybenzyl alcohol as representative species of persistent organic pollutants was quantified. The chemical activation of the carbon was carried out at 480 °C during 30 min with a 1.5 phosphoric acid (H3PO4) impregnation ratio. The activated carbons were characterized by Fourier transform infrared spectroscopy (FTIR), showing the presence of functional groups associated with substances such as phenols, carboxylic acids, aromatic rings, and SiO2. Also, activated carbons were structurally characterized with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), finding that the granules had structured surfaces but with irregular size and disordered channels, which facilitates the impregnation of SiO2 nanoparticles onto the activated carbon surface. The adsorption study of the organic compounds was carried out using UV–Vis spectroscopy. The adsorption isotherms, which were adjusted to the Langmuir, Freundlich and Temkin models, were determined with correlation coefficients of 0.9835, 0.9885 and 0.987. On the other hand, the adsorbent materials achieved removal percentages around 97.9% and 97.8% for phenol and 3,4-dimethoxybenzyl alcohol, respectively. The results showed that activated carbons with SiO2 nanoparticles increased the specific surface area by up to 20%. Therefore, this property allows a greater interaction of contaminants at the time of adsorption. Graphical abstract
En este trabajo se evaluó el efecto de la electrodeposición de fosfato de calcio sobre nanoestructuras de TiO2. Para ello, se desarrollaron nanoestructuras de TiO2 sobre sustratos de Ti6Al4V en una solución de NH4F y NH4H2PO4 y posteriormente se realizó electrodeposición catódica empleando una solución compuesta de Ca(NO3)2 y (NH4)2HPO4 como electrolito. La morfología de las superficies se observó mediante microscopia electrónica de barrido y la capacidad de las superficies para formar apatitas se evaluó a través de absorción atómica tras inmersión de las muestras en fluido corporal simulado (SBF) durante 7 días. Finalmente se evaluó la respuesta electroquímica de las superficies biofuncionalizadas mediante pruebas de resistencia a la polarización y curvas potenciodinámicas. Estos ensayos permitieron observar un incremento en la resistencia a la degradación de las superficies biofuncionalizadas respecto al sustrato.